9 research outputs found
Biological Oxidative Mechanisms for Degradation of Poly(lactic acid) Blended with Thermoplastic Starch
In
the present study, poly(lactic acid) (PLA) and their blends
with 5%/wt and 10%/wt thermoplastic starch (TPS) were submitted to
degradation in simulated soil. To investigate the mechanisms involved
in the degradation, we also submitted the samples to degradation by <i>tert</i>-butyl hydroperoxide, myoglobin, and peroxide-activated
myoglobin. The samples were analyzed by Fourier-transformed infrared
spectrometry (FTIR), scanning electronic microscopy (SEM), contact
angle analysis, and mass loss measurement. The FTIR results indicated
a weak interaction between the two components (PLA and starch) in
the blend’s amorphous structure. However, the corresponding
SEM images showed that TPA increased ridges and roughness at the material
surface associated with an increase of wettability evidenced by contact
angle analysis. Consistently, TPS favored degradation of the material
both in the simulated soil and pro-oxidant model systems. In the simulated
soil, the occurrence of TPS hydrolysis provided glucose, a biological
fuel, that contributed to the growth of the microorganisms. The similar
degradation patterns observed in mimetic pro-oxidant biological systems
and soil suggest that oxidative reactions catalyzed by heme proteins
from biological sources as well as the presence of peroxides and transition
metal traces in the original materials have a significant contribution
to PLA and PLA/TPS degradation
pH-Dependent Synthesis of Anisotropic Gold Nanostructures by Bioinspired Cysteine-Containing Peptides
In
the present study, alkaline peptides AAAXCX (X = lysine or arginine
residues) were designed based on the conserved motif of the enzyme
thioredoxin and used for the synthesis of gold nanoparticles (GNPs)
in the pH range of 2–11. These peptides were compared with
free cysteine, the counterpart acidic peptides AAAECE and γ-ECG
(glutathione), and the neutral peptide AAAACA. The objective was to
investigate the effect of the amino acids neighboring a cysteine residue
on the pH-dependent synthesis of gold nanocrystals. Kohn–Sham
density functional theory (KS-DFT) calculations indicated an increase
in the reducing capacity of AAAKCK favored by the successive deprotonation
of their ionizable groups at increasing pH values. Experimentally,
it was observed that gold speciation and the peptide structure also
have a strong influence on the synthesis and stabilization of GNPs.
AAAKCK produced GNPs at room temperature, in the whole investigated
pH range. By contrast, alkaline pH was the best condition for the
synthesis of GNP assisted by the AAARCR peptide. The acidic peptides
produced GNPs only in the presence of polyethylene glycol, and the
synthesis using AAAECE and γ-ECG also required heating. The
ionization state of AAAKCK had a strong influence on the preferential
growth of the GNPs. Therefore, pH had a remarkable effect on the synthesis,
kinetics, size, shape, and polydispersity of GNPs produced using AAAKCK.
The AAAKCK peptide produced anisotropic decahedral and platelike nanocrystals
at acidic pH values and spherical GNPs at alkaline pH values. Both
alkaline peptides were also efficient capping agents for GNPs, but
they produced a significant difference in the zeta potential, probably
because of different orientations on the gold surface
Interatoma of rat Cygb with hydrogen peroxide.
<p>The network shows, in each node, a protein predicted to have functional links with Cygb and hydrogen peroxide. Inside the figure the abbreviations are SOD1 (superoxide dismutase [Cu-Zn]), Hmox2 (heme oxygenase 2 [HO-2]), Mb (myoglobin), Mpo (myeloperoxidase), cat (catalase), Cygb (cytoglobin), Prdx1 (peroxyredoxin-1), Prdx5 (peroxyredoxin-5) and Srxn1 (Ab2-390). In the figure light green, cyan and magenta lines correspond, respectively, to textmining, databases and experiments supporting the relationship among the proteins and hydrogen peroxide.</p
Formation of Cygb amyloid structure after challenge by peroxides.
<p>A), B) and C) show, respectively the epifluorescence images of Cygb control, control plus GSH and challenged by hydrogen peroxide obtained immediately (left panels) 24 h (right panels) after incubation and staining by thioflavine-T. For the low-vacuum SEM experiments, it was used 7 μmol.L<sup>-1</sup> cygb solution with 70 μmol.L<sup>-1</sup> peroxide solutions. For the epifluorescence experiments 70 μmol.L<sup>-1</sup> protein solution was incubated for 1 h with 700 μmol.L<sup>-1</sup> peroxide solution in the presence of thioflavin-T. For FTIR measurements, 7 μmol.L<sup>-1</sup> protein solution was incubated with 70 μmol.L<sup>-1</sup> peroxide solutions for 1 h. The results are representative of three independent experiments.</p
Changes in the EA spectrum of Cygb during the reaction with hydrogen peroxide.
<p>A) Bleaching of Soret and Q bands of EA spectra of Cygb in the course of the reaction with hydrogen peroxide. The black line represents the EA spectrum of resting Cygb, red, green and blue lines corresponds to the spectra obtained at 30, 60 and 200 s after addition of hydrogen peroxide and indicated by the arrows. B) Normalized spectra of Cygb resting form and 200 s after hydrogen peroxide addition. C) Differential spectra of Cygb obtained 30 and 200 s after the addition of hydrogen peroxide The experiments of EA spectroscopy were performed using 65 μmol.L<sup>-1</sup> Cygb and 0.1 cm optical length. When present, the concentration of peroxide was 650 μmol.L<sup>-1</sup>. These results are representative of three independent replicates.</p
Spectroscopic characteristics of Cygb.
<p>The upper panel shows the EA spectrum of Cygb and the respective inset the corresponding far-UV CD spectrum. The lower panel shows the CD (light gray line) and the MCD spectra of Cygb obtained by addition and subtraction of the original spectra obtained at positive and negative magnetic fields. MCD is shown at increasing magnetic fields and the respective inset shows the linear increase of Soret band intensity promoted by increasing the magnetic field. The experiments of EA spectroscopy were performed with 65 μmol.L<sup>-1</sup> Cygb using 0.1 cm optical length. The experiments of CD and MCD were performed using 20 μmol.L<sup>-1</sup> protein solution in 20 mmol.L<sup>-1</sup> phosphate buffer, pH 7.4. These results are representative of three independent replicates.</p
EPR spectrum of resting Cygb and the spectral components obtained by simulation.
<p>The red line corresponds to simulation of the composite spectrum and the blue and green lines correspond to the high and low spin components, respectively. The g values of the low spin state component are: g1 = 3.228, g2 = 2.033 and g3 = 1.385 with rhombic distortion and for the high spin state the g values are: g1 = 6.062, g2 = 5.785 and g3 = 2.0409. The simulation was done by the software Symphonia. For EPR experiments, the protein concentration was of 1.2 mmol.L<sup>-1</sup>. These results are representative of three independent replicates.</p
Changes in the EPR spectrum of resting Cygb during the reaction with hydrogen peroxide.
<p>The spectra marked as a, b and c were obtained at 30, 60 and 210 s after the addition of hydrogen peroxide. The inset shows a zoom in the spectra of the free radical produced concomitantly with the formation of high valence species. For EPR experiments, the protein concentration was of 1.2 mmol.L<sup>-1</sup>and when present, the peroxide concentration was of 12 mmol.L<sup>-1</sup>. These results are representative of three independent replicates.</p
Changes in the EA spectrum of Cygb during the reaction with <i>t</i>-BuOOH.
<p>A) Bleaching of Soret and Q bands of EA spectra of Cygb in the course of the reaction with <i>t</i>-BuOOH. The black line represents the EA spectrum of resting Cygb, red, green and blue lines corresponds to the spectra obtained at 30, 60 and 200 s after addition of <i>t</i>-BuOOH and indicated by the arrows. B) Normalized spectra of Cygb resting form and 200 s after <i>t</i>-BuOOH addition. C) Differential spectra of Cygb obtained 30 and 200 s after the addition of <i>t</i>-BuOOH. The experiments of EA spectroscopy were performed using 65 μmol.L<sup>-1</sup> Cygb and 0.1 cm optical length. When present, the concentration of peroxides was 650 μmol.L<sup>-1</sup>. These results are representative of three independent replicates.</p