Electrophoretic deposition of YSZ layers on pyrolytic graphite and a porous anode substrate based on NiO-YSZ

Solid oxide fuel cells are promising hydrogen energy devices. The goal of this research was to create ceramic layers for SOFCs based on yttria-stabilized zirconia (YSZ) and to investigate their parameters. YSZ ceramic layers with a thickness of 5.14 μm on a porous NiO–YSZ substrate and 7 μm on pyrolytic graphite were obtained by electrophoretic deposition. X-ray diffraction and electron microscopy were used to determine the composition, structure, and morphological features of ceramic layers. The effects of the substrate's nature, the degree of dispersion of the initial YSZ powder, and the heat treatment conditions on the properties of the ceramic layer YSZ were considered

An Efficient Technique for Ammonia Capture in the Haber–Bosch Process Loop—Membrane-Assisted Gas Absorption

The present study continues the development and enhancement of a highly efficient unique hybrid technique—membrane-assisted gas absorption in designing the separation unit, which provides the improvement in mass-transfer of a target component during the ammonia capture process from a process loop of the Haber–Bosch technological route. In order to minimize the absorbent volume to membrane area ratio, the special separation cell was designed based on a combination of two types of hollow fiber membranes, dense gas separation membrane and porous pervaporation membrane. The separation performance tests were implemented under two sets of conditions, sweeping the bore (permeate) side of a cell with helium and hydrogen-nitrogen mix. For both cases, the membrane-assisted gas absorption cell demonstrated high separation efficiency, and the ammonia concentration in the permeate was never lower than 81 mol%; meanwhile, under the hydrogen-nitrogen bore sweep conditions, the ammonia concentration in the permeate reached 97.5 mol% in a single-step process. Nevertheless, there is a product purity–recovery rate trade-off, which is a typical issue for separation processes

Hydrate-based technique for natural gas processing: Experimental study of pressure-dropping and continuous modes

Gas hydrate crystallization is perspective and energy-efficient technology for gas mixtures processing, including natural gas. There were compared pressure-dropping and continuous gas hydrate crystallization methods for separation of gas mixture closed to natural gas. The studied mixture has been chosen similar to the natural gas composition: CH4 (75.68 mol.%) - С2H6 (7.41 mol.%) - C3H8 (4.53 mol.%) - н-C4H10 (2.47 mol.%) - CO2 (5.40 mol.%) - H2S (1.39 mol.%) - N2 (3.01 mol.%) - Xe (0.11 mol.%). Experiments were provided in the 4 L high pressure reactor, using water solution of SDS (0.20 wt.%). The experiment conditions were 280.15 K and pressure of 4.25 MPa. The components separation factors and recovery for two modes have been researched and compared for choosing more effective options. After comparing these characteristics, it was concluded that continuous process is more productive than pressure-dropping mode. At the stage cut (θ) of 0.9, the gas components total recovery (R) for the continuous mode have exceeded the total recovery for the pressure-dropping mode by 8.15 %, and at θ = 0.8, exceeded by 6.11 %. The recovery and separation factors have the highest values for H2S, C3H8, Xe in the continuous mode: 97.62 %, 94.90 %, 84.98 % and 8.7, 10.53, 6.36, respectively. Thus, the choosing of the more effective stage cut depends on the aim of the process: the highest purity or the largest recovery

Structural changes of erythrocyte membrane revealed by 3D confocal optical profilometer

We examined hematological changes influenced by the experimental hypervitaminosis A. The 3D confocal optical profilometer was applied for assessment of the erythrocytes’ membrane structural changes influenced by an overdose of vitamin A. The blood smears were evaluated in terms of alterations of geometrical and optical parameters of erythrocytes for two groups of animals: oil base and retinol palmitate (n=9 animals for each group). The results demonstrate that an overdose of retinol palmitate causes changes in the torus curvature and pallor of discocytes, their surface area and volume. The observed structural malformations of the shape of red blood cells become visible at the earlier pre-clinical stage of changes in animal state and behaviour. With this in mind, the results of the study open a new area of research in the certain dysfunction diagnosis of red blood cells and has a great potential in the further development of new curative protocols

Structural changes of erythrocyte membrane revealed by 3D confocal optical profilometer

Abstract We examined hematological changes influenced by the experimental hypervitaminosis A. The 3D confocal optical profilometer was applied for assessment of the erythrocytes’ membrane structural changes influenced by an overdose of vitamin A. The blood smears were evaluated in terms of alterations of geometrical and optical parameters of erythrocytes for two groups of animals: oil base and retinol palmitate (n = 9 animals for each group). The results demonstrate that an overdose of retinol palmitate causes changes in the torus curvature and pallor of discocytes, their surface area and volume. The observed structural malformations of the shape of red blood cells become visible at the earlier preclinical stage of changes in animal state and behavior. With this in mind, the results of the study open a new area of research in the certain dysfunction diagnosis of red blood cells and have a great potential in the further development of new curative protocols