Comparison of deposition methods of ZnO thin film on flexible substrate

This paper reports the effect of the different deposition methods towards the ZnO nanostructure crystal quality and film thickness on the polyimide substrate. The ZnO film has been deposited by using the spray pyrolysis technique, sol-gel and RF Sputtering. Different methods give a different nanostructure of the ZnO thin film. Sol gel methods, results of nanoflowers ZnO thin film with the thickness of thin film is 600nm. It also produces the best of the piezoelectric effect in term of electrical performance, which is 5.0 V and 12 MHz of frequency which is higher than other frequency obtained by spray pyrolysis and RF sputtering

Mechanical Properties of Medium Density Fibreboard Composites Material Using Recycled Rubber and Coconut Coir

Natural fibre reinforced composite has emerged as highly potential replacement for synthetic fibres. Various natural waste fibres have been adopted for various engineering applications. This paper investigates the mechanical properties of medium density fibreboard composites material fabricated using recycled rubber and coconut coir. The suitability of using recycled rubber and coconut coir as a raw material and polyurethane as a resin in the manufacturer of medium density fibreboard was also studied. The medium density fibreboards were fabricated at prescribed percentages of filler. The performance of composite was evaluated by its mechanical and physical properties. Experimental investigation indicated that the mechanical strength of medium density fibreboards such as modulus of rupture and modulus of elasticity increased with increasing board hardness. Overall, the results showed that medium density fibreboard had been produced with acceptable properties, thus providing alternatives to manufacturing and agricultures economic planning

The implementation of the internship as a coursework in teaching and learning vocational education

Internship is one of the common practices of higher education institutions in Malaysia for enhancing the learning experience and technical skills among their students. Students who follow the internship programme are found not only to be able to develop their professional attributes but also have the opportunity to acquire professional networks and career paths. Besides being a conventional approach that links students with real-world employment experience for a programme, internship can also be implemented for a specific course within a programme. The article discusses the implementation of an internship programme as a pedagogical approach in providing experiential learning for a specific course, i.e., Foundation and Concrete Work. This study involved 51 second-year students who were pursuing a degree in vocational education at the Universiti Teknologi Malaysia. Analysis on the impact of the internship experience indicates that the internship programme is an effective pedagogical approach for experiential learning for foundation and concrete work course

Graphene-like nano-sheets/36° LiTaO3 surface acoustic wave hydrogen gas sensor

Presented is the material and gas sensing properties of graphene-like nano-sheets deposited on 36deg YX lithium tantalate (LiTaO3) surface acoustic wave (SAW) transducers. The graphene-like nano-sheets were characterized via scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The graphenelike nano-sheet/SAW sensors were exposed to different concentrations of hydrogen (H2) gas in a synthetic air at room temperature. The developed sensors exhibit good sensitivity towards low concentrations of H2 in ambient conditions, as well as excellent dynamic performance towards H2 at room temperature

Customer Awareness and Behavior Intention Towards the Use of Halal Logo on Restaurants

The trend of eating out leads the food service industry to the needs of managing customers and making sure that all their needs and preferences can be fulfilled. The certification and recognition of establishment also becomes the in thing in hospitality industry, which includes the certification of halal, HACCP, and ISO. Establishment with certification is useful as a marketing strategy to attract more customers. This study discusses the level of customer awareness of towards the halal logo used in some restaurants which is carried out to give evidence to restaurant operators regarding the importance of attaching the genuine halal logo in their restaurant. From the findings, it is showed that customers are do aware of the use of halal logo on restaurants. It is also a factor in choosing a restaurant. It is concluded that halal logo is one of the main factors for customers in choosing restaurants which in return can be a main strategy to attract and retain more customers in the future, not only for the local customer but also to foreigners

Comparison of deposition methods of ZnO thin film on flexible substrate

This paper reports the effect of the different deposition methods towards the ZnO nanostructure crystal quality and film thickness on the polyimide substrate. The ZnO film has been deposited by using the spray pyrolysis technique, sol-gel and RF Sputtering. Different methods give a different nanostructure of the ZnO thin film. Sol gel methods, results of nanoflowers ZnO thin film with the thickness of thin film is 600nm. It also produces the best of the piezoelectric effect in term of electrical performance, which is 5.0 V and 12 MHz of frequency which is higher than other frequency obtained by spray pyrolysis and RF sputtering

Polyaniline/palladium nanohybrids for moisture and hydrogen detection.

Palladium nanoparticles display fascinating electronic, optical and catalytic properties, thus they can be used for various applications such as sensor fabrication. Conducting polymers such as polyaniline have also been widely used in sensor technology due to its cost effectiveness, versatility, and ease of synthesis. In this research, attention was given to unify the exceptional properties of these two materials and construct palladium nanoparticle coated polyaniline films to detect hydrogen and moisture. Electrochemical polymerization of aniline was carried out on gold sputtered epoxy resin boards. Polyaniline film was generated across a gap of 0.2 mm created by a scratch made on the gold coating prior to electrochemical polymerization. A palladium nanoparticle dispersion was prepared using sonochemical reduction method and coated on to polyaniline film using drop-drying technique. Polyaniline only films were also fabricated for comparative analysis. Sensitivity of films towards humidity and hydrogen was evaluated using impedance spectroscopy in the presence of the respective species. According to the results, polyaniline films exhibited an impedance drop in the presence of humidity and the response was significantly improved once palladium nanoparticles were incorporated. Interestingly, polyaniline only films did not respond to hydrogen. Nevertheless, palladium nanoparticle coated polyaniline films exhibited remarkable response towards hydrogen