Surface Activation of Titanium Dental Implants by Using UVC-LED Irradiation

Organic contaminants significantly limit the bioactivity of titanium implants, resulting in the degradation known as the ageing of titanium. To reactivate the surfaces, they can be photofunctionalized, i.e., irradiated with C-range ultraviolet (UVC) light. This descriptive in vitro study compares the effectiveness of novel light-emitting diode (LED) technology to remove contaminant hydrocarbons from three different commercially available titanium dental implants: THD, TiUnite, and SLA. The surface topography and morphology were characterized by scanning electron microscopy (SEM). The chemical compositions were analyzed by X-ray photoelectron spectroscopy (XPS), before and after the lighting treatment, by a pair of closely placed UVC (λ = 278 nm) and LED devices for 24 h. SEM analysis showed morphological differences at the macro- and micro-scopic level. XPS analysis showed a remarkable reduction in the carbon contents after the UVC treatment: from 25.6 to 19.5 C at. % (carbon atomic concentration) in the THD; from 30.2 to 20.2 C at. % in the TiUnite; from 26.1 to 19.2 C at. % in the SLA surface. Simultaneously, the concentration of oxygen and titanium increased. Therefore, LED-based UVC irradiation decontaminated titanium surfaces and improved the chemical features of them, regardless of the kind of surface.This research was funded by University of the Basque Country UPV/EHU, PPGA18/5 Research Group and, supported by the Department of Education of the Basque Government within the fund for research groups of the Basque university system IT978-16

Decontamination of Ti Oxide Surfaces by Using Ultraviolet Light: Hg-Vapor vs. LED-Based Irradiation

C-range Ultraviolet (UVC) mercury (Hg)-vapor lamps have shown the successful decontamination of hydrocarbons and antimicrobial effects from titanium surfaces. This study focused on surface chemistry modifications of titanium dental implants by using two different light sources, Hg-vapor lamps and Light Emitting Diodes (LEDs), so as to compare the effectivity of both photofunctionalization technologies. Two different devices, a small Hg-vapor lamp (λ = 254 nm) and a pair of closely placed LEDs (λ = 278 nm), were used to irradiate the implants for 12 min. X-ray Photoelectron Spectroscopy (XPS) was employed to characterize the chemical composition of the surfaces, analysing the samples before and after the lighting treatment, performing a wide and narrow scan around the energy peaks of carbon, oxygen and titanium. XPS analysis showed a reduction in the concentration of surface hydrocarbons in both UVC technologies from around 26 to 23.4 C at.% (carbon atomic concentration). Besides, simultaneously, an increase in concentration of oxygen and titanium was observed. LED-based UVC photofunctionalization has been suggested to be as effective a method as Hg-vapor lamps to remove the hydrocarbons from the surface of titanium dental implants. Therefore, due to the increase in worldwide mercury limitations, LED-based technology could be a good alternative decontamination source.This research was funded by University of the Basque Country UPV/EHU, PPGA18/5 Research Group

Is clindamycin effective in preventing infectious complications after oral surgery? Systematic review and meta-analysis of randomized controlled trials

[EN] Objective To determine the effect of clindamycin in the prevention of infection after oral surgery. Material and Methods This systematic review and meta-analysis followed the PRISMA statement, the PICO-framework and included only randomized controlled clinical trials. In all studies clindamycin was administered to prevent infections in patients who underwent oral surgery. Two independent researchers conducted the search, data extraction and risk of bias assessment. Included studies were classified by the type of oral surgery. Besides, data of patients, procedures and outcome variables were collected. Risk ratios (RR) and 95% confidence intervals (CI) were calculated by using Mantel-Haenszel model and the number needed to treat (NNT). Finally, any potential sources of heterogeneity were estimated. Results Seven trials of 540 articles met the inclusion criteria and were included in the qualitative synthesis. Four articles assessing the effect of oral clindamycin in third molar surgery were quantitatively analyzed. The overall RR was 0.66 (95% CI = 0.38-1.16), being non-statistically significant (p = 0.15). There was no heterogeneity between the studies I-2 = 0, p = 0.44. The NNT was 29 (95% CI = 12- -57). Conclusions The effectiveness of clindamycin could not be evaluated except in third molar extraction. Oral clindamycin is ineffective in preventing infection in third molar surgery.Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Open Access funding provided by University of the Basque Country

Adelante / Endavant

Séptimo desafío por la erradicación de la violencia contra las mujeres del Institut Universitari d’Estudis Feministes i de Gènere "Purificación Escribano" de la Universitat Jaume