p-Type doping of II-VI heterostructures from surface states: application to ferromagnetic Cd1−x_{1-x}Mnx_xTe quantum wells

We present a study of p-type doping of CdTe and Cd$_{1-x}$Mn$_x$Te quantum wells from surface states. We show that this method is as efficient as usual modulation doping with nitrogen acceptors, and leads to hole densities exceeding $2 \times 10^{11}$ cm$^{-2}$. Surface doping was successfully applied to obtain carrier-induced ferromagnetism in a Cd$_{1-x}$Mn$_x$Te quantum well. The observed temperature dependence of photoluminescence spectra, and the critical temperature, correspond well to those previously reported for ferromagnetic quantum wells doped with nitrogen.Comment: 4 figure

Corrosion and Electrochemical Properties of Laser-Shock-Peening-Treated Stainless Steel AISI 304L in VVER Primary Water Environment

Laser Shock Peening (LSP) is a surface treatment technique for metallic materials. It induces plastic deformation at the surface of up to around 1 mm in depth. This process introduces residual stresses that lead to strain hardening, and potentially improvements in fatigue, stress corrosion cracking (SCC) and general corrosion behaviour in many, but not all, corrosive media. In this paper, two specimens made of AISI 304L stainless steel, one LSP-treated and one un-treated, were tested at 280 °C and 8 MPa in VVER (or PWR) primary circuit water chemistry using in situ Electrochemical Impedance Spectroscopy (EIS). This experiment serves to qualify the influence of LSP on the changes in corrosion behaviour in high-temperature, high-density water. The residual stress (RS) measurement of the surface showed a compression RS. Before LSP treatment, RS at the surface was 52.2 MPa in the rolling direction 0°RD and 10.42 MPa in the transverse rolling direction 90°RD. After the treatment, surface RS was −175.27 MPa and −183.51 MPa for Scan and TScan directions, respectively. The effect of compressive RS at the surface was studied and showed an increase in corrosion rate. The analysis of oxide layer by SEM revealed differences between LSP-treated and untreated AISI 304L specimens and their connection to corrosion rates

Light and electric field control of ferromagnetism in magnetic quantum structures

A strong influence of illumination and electric bias on the Curie temperature and saturation value of the magnetization is demonstrated for semiconductor structures containing a modulation-doped p-type Cd0.96Mn0.04Te quantum well placed in various built-in electric fields. It is shown that both light beam and bias voltage generate an isothermal and reversible cross-over between the paramagnetic and ferromagnetic phases, in the way that is predetermined by the structure design. The observed behavior is in quantitative agreement with the expectations for systems, in which ferromagnetic interactions are mediated by the weakly disordered two-dimensional hole liquid.Comment: 4 pages and 3 figure

Would Functional Agricultural Foods Improve Human Health?

Concern over diet-health relationships has moved to the forefront of public health concerns in the UK and much of the developed world. It has been estimated, for example, that obesity costs the UK National Health Service up to £6b per year (Rayner and Scarborough, 2005), but if all consumers were to follow recommended healthy eating guidelines there would be major implications for food consumption, land use and international trade (Srinivasan et al, 2006). This is unlikely to happen, at least in the short term, but it is realistic to anticipate some dietary adjustment toward the recommendations, resulting in an improvement in diet quality (Mazzocchi et al, 2007). Although consumers are reluctant to make major changes to their diets, they may be prepared to substitute existing foods for healthier alternatives. Three of the most prominent nutritional recommendations are to consume more fruit and vegetables, which contain phytochemicals beneficial to health, reduce consumption of saturated fatty acids (SFA) and increase intake of long-chain n-3 fatty acids (FA). In the first case, consumption of fruit and vegetables has been stable at around three 80 g portions per person per day according to the Health Survey for England. It is estimated that 42,200 deaths per year could be avoided in England and 411,000 Quality Adjusted Life Years (QALYs) could be saved if fruit and vegetable consumption were increased to the recommended 5 portions per day (Ofcom 2006). As well as continuing to encourage people to eat more, it could be desirable to ‘intensify’ the beneficial phytochemical content of existing fruit and vegetables.Agribusiness, Agricultural and Food Policy, Farm Management, Food Consumption/Nutrition/Food Safety, Industrial Organization,

Short review: Potential impact of delamination cracks on fracture toughness of structural materials

The current energy policy envisages extended lifetime for the current nuclear power plants (GEN II NPP). This policy imposes a large research effort to understand the ageing of power plant components. In this goal, it is necessary to improve knowledge about safety, reliability and components’ integrity for more than forty years of operation. In Central and Eastern Europe, the majority of NPPs are VVER types, where some of the components are produced from austenitic steel 08Ch18N10T. Irradiated 08Ch18N10T may exhibit brittle behavior, namely delamination cracks are found in some cases on the fracture surface of irradiated 08Ch18N10T with elongated ?-ferrite. Delamination cracks have also been observed on the fracture surface of high-strength steels or aluminum-lithium alloys. This article presents a state-of-the art review to provide a detailed analysis of the influence of delamination cracks on the toughness of metal alloys. In general, the delamination cracks are present in metal alloys having a high texture and microstructure anisotropy. Three types of delamination cracks have been observed and are classified as crack arrester delamination, crack divider delamination and crack splitting delamination. The microscopy characterization, 3D fracture theories and computational studies explaining possible causes and effects of delamination cracks on the mechanical properties of metal alloys are presented

Optical frequency measurement of the 1S-3S two-photon transition in hydrogen

This article reports the first optical frequency measurement of the $1\mathrm{S}-3\mathrm{S}$ transition in hydrogen. The excitation of this transition occurs at a wavelength of 205 nm which is obtained with two frequency doubling stages of a titanium sapphire laser at 820 nm. Its frequency is measured with an optical frequency comb. The second-order Doppler effect is evaluated from the observation of the motional Stark effect due to a transverse magnetic field perpendicular to the atomic beam. The measured value of the $1\mathrm{S}_{1/2}(F=1)-3\mathrm{S}_{1/2}(F=1)$ frequency splitting is $2 922 742 936.729 (13) \mathrm{MHz}$ with a relative uncertainty of $4.5\times10^{-12}$. After the measurement of the $1\mathrm{S}-2\mathrm{S}$ frequency, this result is the most precise of the optical frequencies in hydrogen

Tensile Forces and Shape Entropy Explain Observed Crista Structure in Mitochondria

A model is presented from which the observed morphology of the inner mitochondrial membrane can be inferred as minimizing the system's free energy. Besides the usual energetic terms for bending, surface area, and pressure difference, our free energy includes terms for tension that we believe to be exerted by proteins and for an entropic contribution due to many dimensions worth of shapes available at a given energy. In order to test the model, we measured the structural features of mitochondria in HeLa cells and mouse embryonic fibroblasts using 3D electron tomography. Such tomograms reveal that the inner membrane self-assembles into a complex structure that contains both tubular and flat lamellar crista components. This structure, which contains one matrix compartment, is believed to be essential to the proper functioning of mitochondria as the powerhouse of the cell. We find that tensile forces of the order of 10 pN are required to stabilize a stress-induced coexistence of tubular and flat lamellar cristae phases. The model also predicts \Deltap = -0.036 \pm 0.004 atm and \sigma=0.09 \pm 0.04 pN/nm

Using Therbligs to embed intelligence in workpieces for digital assistive assembly

Current OEM (Original Equipment Manufacturer) facilities tend to be highly integrated and are often situated on one site. While providing scale of production such centralisation may create barriers to the achievement of fully flexible, adaptable, and reconfigurable factories. The advent of Industry 4.0 opens up opportunities to address these barriers by decentralising information and decision-making in manufacturing systems through CPS (Cyber Physical Systems) use. This research presents a qualitative study that investigates the possibility of distributing information and decision-making logic into ‘smart workpieces’ which can actively participate in assembly operations. To validate the concept, a use-case demonstrator, corresponding to the assembly of a ‘flat-pack’ table, was explored. Assembly parts in the demonstrator, were equipped with computation, networking, and interaction capabilities. Ten participants were invited to evaluate the smart assembly method and compare its results to the traditional assembly method. The results showed that in its current configuration the smart assembly was slower. However, it made the assembly process more flexible, adaptable and reconfigurable

SUMOylation of the mitochondrial fission protein Drpl occurs at multiple nonconsensus sites within the B domain and is linked to its activity cycle

Dynamin‐related protein (Drp) 1 is a key regulator of mitochondrial fission and is composed of GTP‐binding, Middle, insert B, and C‐terminal GTPase effector (GED) domains. Drpl associates with mitochondrial fission sites and promotes membrane constriction through its intrinsic GTPase activity. The mechanisms that regulate Drpl activity remain poorly understood but are likely to involve reversible post‐translational modifications, such as conjugation of small ubiquitin‐like modifier (SUMO) proteins. Through a detailed analysis, we find that Drpl interacts with the SUMO‐conjugating enzyme Ubc9 via multiple regions and demonstrate that Drpl is a direct target of SUMO modification by all three SUMO isoforms. While Drpl does not harbor consensus SUMOylation sequences, our analysis identified2 clusters of lysine residues within the B domain that serve as noncanonical conjugation sites. Although initial analysis indicates that mitochondrial recruitment of ectopically expressed Drpl in response to staurosporine is unaffected by loss of SUMOylation, we find that Drpl SUMOylation is enhanced in the context of the K38A mutation. This dominant‐negative mutant, which is deficient in GTP binding and hydrolysis, does not associate with mitochondria and prevents normal mitochondrial fission. This finding suggests that SUMOylation of Drpl is linked to its activity cycle and is influenced by Drpl localization.—Figueroa‐Romero, C., Iniguez‐Lluhi, J. A., Stadler, J., Chang, C.‐R., Arnoult, D., Keller, P. J., Hong, Y., Blackstone, C., Feldman, E. L. SUMOylation of the mitochondrial fission protein Drpl occurs at multiple nonconsensus sites within the B domain and is linked to its activity cycle. FASEB J. 23, 3917–3927 (2009). www.fasebj.orgPeer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154272/1/fsb2fj09136630.pd

Block of death-receptor apoptosis protects mouse cytomegalovirus from macrophages and is a determinant of virulence in immunodeficient hosts.

The inhibition of death-receptor apoptosis is a conserved viral function. The murine cytomegalovirus (MCMV) gene M36 is a sequence and functional homologue of the human cytomegalovirus gene UL36, and it encodes an inhibitor of apoptosis that binds to caspase-8, blocks downstream signaling and thus contributes to viral fitness in macrophages and in vivo. Here we show a direct link between the inability of mutants lacking the M36 gene (ΔM36) to inhibit apoptosis, poor viral growth in macrophage cell cultures and viral in vivo fitness and virulence. ΔM36 grew poorly in RAG1 knockout mice and in RAG/IL-2-receptor common gamma chain double knockout mice (RAGγC(-/-)), but the depletion of macrophages in either mouse strain rescued the growth of ΔM36 to almost wild-type levels. This was consistent with the observation that activated macrophages were sufficient to impair ΔM36 growth in vitro. Namely, spiking fibroblast cell cultures with activated macrophages had a suppressive effect on ΔM36 growth, which could be reverted by z-VAD-fmk, a chemical apoptosis inhibitor. TNFα from activated macrophages synergized with IFNγ in target cells to inhibit ΔM36 growth. Hence, our data show that poor ΔM36 growth in macrophages does not reflect a defect in tropism, but rather a defect in the suppression of antiviral mediators secreted by macrophages. To the best of our knowledge, this shows for the first time an immune evasion mechanism that protects MCMV selectively from the antiviral activity of macrophages, and thus critically contributes to viral pathogenicity in the immunocompromised host devoid of the adaptive immune system