507 research outputs found
The Global Precipitation Measurement (GPM) Mission: Overview and U.S. Status
The Global Precipitation Measurement (GPM) Mission is an international satellite mission specifically designed to unify and advance precipitation measurements from a constellation of research and operational microwave sensors. Building upon the success of the U.S.-Japan Tropical Rainfall Measuring Mission (TRMM), the National Aeronautics and Space Administration (NASA) of the United States and the Japan Aerospace and Exploration Agency (JAXA) will deploy in 2013 a GPM "Core" satellite carrying a KulKa-band Dual-frequency Precipitation Radar (DPR) and a conical-scanning multi-channel (10-183 GHz) GPM Microwave Imager (GMI) to establish a new reference standard for precipitation measurements from space. The combined active/passive sensor measurements will also be used to provide common database for precipitation retrievals from constellation sensors. For global coverage, GPM relies on existing satellite programs and new mission opportunities from a consortium of partners through bilateral agreements with either NASA or JAXA. Each constellation member may have its unique scientific or operational objectives but contributes microwave observations to GPM for the generation and dissemination of unified global precipitation data products. In addition to the DPR and GMI on the Core Observatory, the baseline GPM constellation consists of the following sensors: (1) Special Sensor Microwave Imager/Sounder (SSMIS) instruments on the U.S. Defense Meteorological Satellite Program (DMSP) satellites, (2) the Advanced Microwave Scanning Radiometer- 2 (AMSR-2) on the GCOM-Wl satellite of JAXA, (3) the Multi-Frequency Microwave Scanning Radiometer (MADRAS) and the multi-channel microwave humidity sounder (SAPHIR) on the French-Indian Megha-Tropiques satellite, (4) the Microwave Humidity Sounder (MHS) on the National Oceanic and Atmospheric Administration (NOAA)-19, (5) MHS instruments on MetOp satellites launched by the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT), (6) the Advanced Technology Microwave Sounder (ATMS) on the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP), (7) ATMS instruments on the NOAA-NASA Joint Polar Satellite System (JPSS) satellites, and (8) a microwave imager under planning for the Defense Weather Satellite System (DWSS)
Estimation of the particle concentration in hydraulic liquid by the in-line automatic particle counter based on the CMOS image sensor
Modern hydraulic systems should be monitored on the regular basis. One of the most effective ways to address this task is utilizing in-line automatic particle counters (APC) built inside of the system. The measurement of particle concentration in hydraulic liquid by APC is crucial because increasing numbers of particles should mean functional problems. Existing automatic particle counters have significant limitation for the precise measurement of relatively low concentration of particle in aerospace systems or they are unable to measure higher concentration in industrial ones. Both issues can be addressed by implementation of the CMOS image sensor instead of single photodiode used in the most of APC. CMOS image sensor helps to overcome the problem of the errors in volume measurement caused by inequality of particle speed inside of tube. Correction is based on the determination of the particle position and parabolic velocity distribution profile. Proposed algorithms are also suitable for reducing the errors related to the particles matches in measurement volume. The results of simulation show that the accuracy increased up to 90 per cent and the resolution improved ten times more compared to the single photodiode sensor
A faunistic study and population fluctuations of mites associated with stored wheat in Tehran region, Iran
In order to carry out a faunistic study on mites and their abundance in stored wheat in Tehran, Karaj and Varamin, mite samples were collected from stored wheat, straw and dust in silos, flour-mills and mills during spring 2005. Twenty-five species belonging to 11 families and three orders including Astigmata, Prostigmata and Mesostigmata were identified, of which five species, viz. Aleuroglyphus ovatus (Troupeau), Tyrolichus casei (Oudemans), Acarophenax tribolii (Newstead & Duvall), Cheyletus eruditus (Schrank) and Erythraeus garmsaricus Saboori et al., are newly recorded from wheat stores of Tehran province. The most abundant predator and pest mites were Acaropsellina sollers (Kuzin) (Cheyletidae) and Acarus siro (L.) (Acaridae), respectively. The highest observed number of mites was, in sequence: Tehran Silo, Ard-Iran flour-mill and Jafar Joshaghani mill
Cryopreservation of Cortical Tissue Blocks for the Generation of Highly Enriched Neuronal Cultures
In this study, we outline a standardized protocol for the successful cryopreservation and thawing of cortical brain tissue blocks to generate highly enriched neuronal cultures. For this protocol the freezing medium used is 10% dimethyl sulfoxide (DMSO) diluted in Hank's Buffered Salt Solution (HBSS). Blocks of cortical tissue are transferred to cryovials containing the freezing medium and slowly frozen at -1°C/min in a rate-controlled freezing container. Post-thaw processing and dissociation of frozen tissue blocks consistently produced neuronal-enriched cultures which exhibited rapid neuritic growth during the first 5 days in culture and significant expansion of the neuronal network within 10 days. Immunocytochemical staining with the astrocytic marker glial fibrillary acidic protein (GFAP) and the neuronal marker beta-tubulin class III, revealed high numbers of neurons and astrocytes in the cultures. Generation of neural precursor cell cultures after tissue block dissociation resulted in rapidly expanding neurospheres, which produced large numbers of neurons and astrocytes under differentiating conditions. This simple cryopreservation protocol allows for the rapid, efficient, and inexpensive preservation of cortical brain tissue blocks, which grants increased flexibility for later generation of neuronal, astrocyte, and neuronal precursor cell cultures
Flexible Power Electronic Transformer for Power Flow Control Applications
This paper proposes a Flexible Power Electronic Transformer (FPET) for the application in the micro-grids. The low frequency transformer is usually used at the Point of Common Coupling (PCC) to connect the low voltage grid and utility network to each other. The conventional 50Hz transformer results in enhanced low voltage-grid power management system during grid-connected operation. In this paper, the whole system represented as two, three-phase AC systems with an intermediate high-frequency transformer for power flow controlling. The FPET consists of a high frequency transformer and three-phase to single-phase matrix converter. The matrix converters are modulated with a Pulse Width Modulation (PWM) strategy for a bi-directional power flow control. Phase shift modulation strategy in two sides of FPET is used for power flow controlling by PI controller from utility network to low voltage grid and vice versa. FPET model is established in Matlab/Simulink software with controller for power flow controlling. Presented simulation results have shown the validity of the proposed control system for FPET through the Matlab/Simulink simulation
Cumulative Burden of Morbidity Among Testicular Cancer Survivors After Standard Cisplatin-Based Chemotherapy: A Multi-Institutional Study
Purpose In this multicenter study, we evaluated the cumulative burden of morbidity (CBM) among > 1,200 testicular cancer survivors and applied factor analysis to determine the co-occurrence of adverse health outcomes (AHOs). Patients and Methods Participants were ≤ 55 years of age at diagnosis, finished first-line chemotherapy ≥ 1 year previously, completed a comprehensive questionnaire, and underwent physical examination. Treatment data were abstracted from medical records. A CBM score encompassed the number and severity of AHOs, with ordinal logistic regression used to assess associations with exposures. Nonlinear factor analysis and the nonparametric dimensionality evaluation to enumerate contributing traits procedure determined which AHOs co-occurred. Results Among 1,214 participants, approximately 20% had a high (15%) or very high/severe (4.1%) CBM score, whereas approximately 80% scored medium (30%) or low/very low (47%). Increased risks of higher scores were associated with four cycles of either ifosfamide, etoposide, and cisplatin (odds ratio [OR], 1.96; 95% CI, 1.04 to 3.71) or bleomycin, etoposide, and cisplatin (OR, 1.44; 95% CI, 1.04 to 1.98), older attained age (OR, 1.18; 95% CI, 1.10 to 1.26), current disability leave (OR, 3.53; 95% CI, 1.57 to 7.95), less than a college education (OR, 1.44; 95% CI, 1.11 to 1.87), and current or former smoking (OR, 1.28; 95% CI, 1.02 to 1.63). CBM score did not differ after either chemotherapy regimen ( P = .36). Asian race (OR, 0.41; 95% CI, 0.23 to 0.72) and vigorous exercise (OR, 0.68; 95% CI, 0.52 to 0.89) were protective. Variable clustering analyses identified six significant AHO clusters (χ2 P < .001): hearing loss/damage, tinnitus (OR, 16.3); hyperlipidemia, hypertension, diabetes (OR, 9.8); neuropathy, pain, Raynaud phenomenon (OR, 5.5); cardiovascular and related conditions (OR, 5.0); thyroid disease, erectile dysfunction (OR, 4.2); and depression/anxiety, hypogonadism (OR, 2.8). Conclusion Factors associated with higher CBM may identify testicular cancer survivors in need of closer monitoring. If confirmed, identified AHO clusters could guide the development of survivorship care strategies
Ore Genesis of the Abu Ghalaga Ferro-Ilmenite Ore Associated with Neoproterozoic Massive-Type Gabbros, South-Eastern Desert of Egypt: Evidence from Texture and Mineral Chemistry
Massif-type mafic intrusions (gabbro and anorthosite) are known for their considerable resources of vanadium-bearing iron–titanium oxide ores. Massive-type gabbroic and anorthosite rocks are frequently associated with magmatic rocks that have significant quantities of iron, titanium, and vanadium. The most promising intrusions that host Fe-Ti oxide ores are the gabbroic rocks in the south-eastern desert. The ilmenite ore deposits are hosted in arc gabbroic and anorthosite rocks. They are classified into three types, namely black ore, red ore, and disseminated ore. The black ilmenite ore is located at the deeper level, while the oxidized red ore is mainly located at or near the surface. Petrographically, the gabbro and ilmenite ores indicate a crystallization sequence of plagioclase, titaniferous pyroxene, and ilmenite. This reveals that the ilmenite is a magmatic deposit formed by the liquid gravity concentration of ilmenite following the crystallization of feldspar and pyroxene. Meanwhile, quartz, tremolite, zoisite, and opaque minerals are accessory minerals. The Fe-Ti ores are composed of ilmenite hosting exsolved hematite lamellae of variable sizes and shapes, gangue silicate minerals, and some sulfides. The X-ray diffraction (XRD) data reveal the presence of two mineral phases: ilmenite and hematite formed by the unmixing of the ferroilmenite homogeneous phase upon cooling. As a result, the ore is mostly made up of hemo-ilmenite. Using an electron microscope (SEM), as well as by observing the textures seen by the ore microscope, ilmenite is the dominant Fe-Ti oxide and contains voluminous hematite exsolved crystals. Under the scanning electron microscope, ilmenite contained intergrowths of hematite as a thin sandwich and lens shape. The formation of hematite lamellae indicates an oxidation process. Mineral chemistry-based investigations reveal late/post-magmatic activity at high temperatures. The examined ilmenite plots on the ferro-ilmenite line were created by continuous solid solution over 800 °C, whereas the analyzed magnetite and Ti-magnetite plot near the magnetite line and were formed by continuous solid solution exceeding 600 °C
- …