Plasma Deposited Electrocatalytic Films with Controlled Content of Pt Nanoclusters

n/

Synthesis of Tailored Perfluoro Unsaturated Monomers for Potential Applications in Proton Exchange Membrane Preparation

The aim of the present work is the synthesis and characterization of new perfluorinated monomers bearing, similarly to Nafion®, acidic groups for proton transport for potential and future applications in proton exchange membrane (PEM) fuel cells. To this end, we focused our attention on the synthesis of various molecules with (i) sufficient volatility to be used in vacuum polymerization techniques (e.g., PECVD)), (ii) sulfonic, phosphonic, or carboxylic acid functionalities for proton transport capacity of the resulting membrane, (iii) both aliphatic and aromatic perfluorinated tags to diversify the membrane polarity with respect to Nafion®, and (iv) a double bond to facilitate the polymerization under vacuum giving a preferential way for the chain growth of the polymer. A retrosynthetic approach persuaded us to attempt three main synthetic strategies: (a) organometallic Heck-type cross-coupling, (b) nucleophilic displacement, and (c) Wittig–Horner reaction (carbanion approach). Preliminary results on the plasma deposition of a polymeric film are also presented. The variation of plasma conditions allowed us to point out that the film prepared in the mildest settings (20 W) shows the maximum monomer retention in its structure. In this condition, plasma polymerization likely occurs mainly by rupture of the bond in the monomer molecule

Opto-chemical control through thermal treatment of plasma enhanced atomic layer deposited ZnO

Properties and performance of materials are closely connected. In order to obtain piezoelectric and lasing optical quality, ZnO has to be free of defects and highly crystalline. Instead, conductivity depends upon such defects, making it not trivial to aim at a specific set of properties in a single step. In this regard, we studied in situ the effect of temperature as an additional knob to finely control such properties. In this contribution, plasma enhanced atomic layer deposited (PE-ALD) zinc oxide (ZnO) layers, deposited between 25 °C and 250 °C, were studied in situ during annealing in air, and the opto-chemical and structural characteristics of the oxides were followed as a function of temperature. In situ spectroscopic ellipsometry (SE) and X-ray diffraction (XRD) were adopted to identify temperature windows where major structural and optical changes in the material occurred. Two temperature regions were identified for the effusion of adsorbed gases and minor structural rearrangements (180–280 °C) and for the growth/coalescence of ZnO crystals and its densification (360–500 °C). The results were corroborated by ex situ SE, XRD, UV–Vis and X-ray photoelectron spectroscopy. The in situ study revealed differences among the ZnO layers deposited at different temperatures, giving additional insights on the material properties deposited by PE-ALD

Deep Control of Linear Oligomerization of Glycerol Using Lanthanum Catalyst on Mesoporous Silica Gel

The valorization of glycerol (1), a waste of biodiesel production of Fatty Acid Methyl Esters (FAMEs), adopting a “green” approach, represents an important goal of sustainable chemistry. While the polymerization of 1 to hyperbranched oligomers is a well-established process, the linear analogues are difficult to obtain. In this context, we explore the reaction without the solvent of heterogeneous hybrid La(III)O-KIT-6 catalyst (2), which is based on lanthanum oxide on mesoporous silica gel, showing a superior linear selectivity compared to most of the analogous catalysts recently reported

Photocatalytic inactivation of Escherichia coli bacteria in water using low pressure plasma deposited TiO2 cellulose fabric

Fabrics obtained from cellulose spinning, extracted from Spanish broom, were coated with TiO2 film, through the low pressure plasma sputtering technique, in order to get antibacterial activity. The obtained fabrics were used for the photocatalytic degradation of Escherichia coli, by irradiation with UV-light emitting diodes (UV-LED), in a batch photocatalytic reactor. Before and after functionalization treatments, cellulosic substrates were chemically characterized by X-ray photoelectron spectroscopy (XPS) analyses. Water Contact Angle (WCA) measurements allowed obtaining information about the hydrophilicity of the materials, while their antibacterial efficiency was determined at several initial concentrations (from 103 up to 108 CFU mL−1) of bacteria in distilled water, bottled water and synthetic wastewater. It was found that photocatalytic reactions were capable of achieving up to 100% bacterial inactivation in 1 h of treatment, following a pseudo-first order kinetic model. No bacterial regrowth was observed after photocatalytic treatments in almost all experimental conditions. In contrast, during photolytic treatment (i.e. in the absence of the TiO2 coated fabrics) bacteria recovered their initial concentration after 3 h in the dark. Finally, the reusability of the plasma modified fibers to inactivate bacteria was studied

On the transformation of "zincone"-like into porous ZnO thin films from sub-saturated plasma enhanced atomic layer deposition

The synthesis of nanoporous ZnO thin films is achieved through annealing of zinc-alkoxide (“zincone”-like) layers obtained by plasma-enhanced atomic layer deposition (PE-ALD). The zincone-like layers are deposited through sub-saturated PE-ALD adopting diethylzinc and O2 plasma with doses below self-limiting values. Nanoporous ZnO thin films were subsequently obtained by calcination of the zincone-like layers between 100–600 °C. Spectroscopic ellipsometry (SE) and X-ray diffraction (XRD) were adopted in situ during calcination to investigate the removal of carbon impurities, development of controlled porosity, and formation and growth of ZnO crystallites. The layers developed controlled nanoporosity in the range of 1–5%, with pore sizes between 0.27 and 2.00 nm as measured with ellipsometric porosimetry (EP), as a function of the plasma dose and post-annealing temperature. Moreover, the crystallinity and crystallite orientation could be tuned, ranging from a powder-like to a (100) preferential growth in the out-of-plane direction, as measured by synchrotron-radiation grazing incidence XRD. Calcination temperature ranges were identified in which pore formation and subsequent crystal growth occurred, giving insights in the manufacturing of nanoporous ZnO from Zn-based hybrid materials

Nanostructuring of Teflon-likes in Single Step Processes

It is a general trend nowadays, and is also an useful approach for many important industrial applications, to tailor polymers to the desired chemistry or nano-morphology. The combination of both, chemistry and morphology, is a surplus value. Particularly if it is possible to tune each feature independently of the other.Nagasaki Symposium on Nano-Dynamics 2008 (NSND2008) 平成20年1月29日(火)於長崎大学 Invited Lectur

Spray-dried mucoadhesives for intravesical drug delivery using N-acetylcysteine- and glutathione-glycol chitosan conjugates

This work describes N-acetylcysteine (NAC)- and glutathione (GSH)-glycol chitosan (GC) polymer conjugates engineered as potential platform useful to formulate micro-(MP) and nano-(NP) particles via spray-drying techniques. These conjugates are mucoadhesive over the range of urine pH, 5.0-7.0, which makes them advantageous for intravesical drug delivery and treatment of local bladder diseases. NAC- and GSH-GC conjugates were generated with a synthetic approach optimizing reaction times and purification in order to minimize the oxidation of thiol groups. In this way, the resulting amount of free thiol groups immobilized per gram of NAC-and GSH-GC conjugates was 6.3 and 3.6 mmol, respectively. These polymers were completely characterized by molecular weight, surface sulfur content, solubility at different pH values, substitution and swelling degree. Mucoadhesion properties were evaluated in artificial urine by turbidimetric and zeta (zeta)-potential measurements demonstrating good mucoadhesion properties, in particular for NAC-GC at pH 5.0. Starting from the thiolated polymers, MP and NP were prepared using both the Bidchi B-191 and Nano Buchi B-90 spray dryers, respectively. The resulting two formulations were evaluated for yield, size, oxidation of thiol groups and ex-vivo mucoadhesion. The new spray drying technique provided NP of suitable size (<1 mu m) for catheter administration, low degree of oxidation, and sufficient mucoadhesion property with 9% and 18% of GSH- and NAC-GC based NP retained on pig mucosa bladder after 3 h of exposure, respectively

Blood serum amyloid A as potential biomarker of pembrolizumab efficacy for patients affected by advanced non-small cell lung cancer overexpressing PD-L1: results of the exploratory "FoRECATT" study

Background: Identifying the patients who may benefit the most from immune checkpoints inhibitors remains a great challenge for clinicians. Here we investigate on blood serum amyloid A (SAA) as biomarker of response to upfront pembrolizumab in patients with advanced non-small-cell lung cancer (NSCLC). Methods: Patients with PD-L1 ≥ 50% receiving upfront pembrolizumab (P cohort) and with PD-L1 0-49% treated with chemotherapy (CT cohort) were evaluated for blood SAA and radiological response at baseline and every 9 weeks. Endpoints were response rate (RR) according to RECIST1.1, progression-free (PFS) and overall survival (OS). The most accurate SAA cut-off to predict response was established with ROC analysis in the P cohort. Results: In the P Cohort (n = 42), the overall RR was 38%. After a median follow-up of 18.5 months (mo), baseline SAA ≤ the ROC-derived cut-off (29.9 mg/L; n = 28/42.67%) was significantly associated with higher RR (53.6 versus 7.1%; OR15, 95% CI 1.72-130.7, p = 0.009), longer PFS (17.4 versus 2.1 mo; p < 0.0001) and OS (not reached versus 7.2mo; p < 0.0001) compared with SAA > 29.9 mg/L. In multivariate analysis, low SAA positively affects PFS (p = 0.001) and OS (p = 0.048) irrespective of ECOG PS, number of metastatic sites and pleural effusion. SAA monitoring (n = 40) was also significantly associated with survival endpoints: median PFS 17.4 versus 2.1 mo and median OS not reached versus 7.2 mo when SAA remained low (n = 14) and high (n = 12), respectively. In the CT Cohort (n = 30), RR was not affected by SAA level (p > 0.05) while low SAA at baseline (n = 17) was associated with better PFS (HR 0.38, 95% CI 0.16-0.90, p = 0.006) and OS (HR 0.25, 95% CI 0.09-0.67, p < 0.001). Conclusion: Low SAA predicts good survival outcomes irrespective of treatment for advanced NSCLC patients and higher likelihood of response to upfront pembrolizumab only. The strong prognostic value might be exploited to easily identify patients most likely to benefit from immunotherapy. A further study (FoRECATT-2) is ongoing to confirm results in a larger sample size and to investigate the effect of SAA on immune response in vitro assays

PTEN Loss as a Predictor of Tumor Heterogeneity and Poor Prognosis in Patients With EGFR-mutant Advanced Non-small-cell Lung Cancer Receiving Tyrosine Kinase Inhibitors

Background: Rapid disease progression of patients with advanced epidermal growth factor receptor (EGFR)-mutant non-small-cell lung cancer (NSCLC) has been recently associated with tumor heterogeneity, which may be mirrored by coexisting concomitant alterations. The aim of this analysis was to investigate the correlation between loss of function of PTEN and the efficacy of tyrosine kinase inhibitors in this population. Materials and Methods: Archival tumor blocks from patients with EGFR-mutant NSCLC who were administered upfront tyrosine kinase inhibitors were retrospectively collected. The status of 4 genes (PTEN, TP53, c-MET, IGFR) was evaluated by immunohistochemistry, and it was correlated with overall response rate, overall survival (OS), and progression-free survival (PFS). Results: Fifty-one patients were included. In multivariate analysis, PTEN loss (hazard ratio [HR], 3.46; 95% confidence interval [CI], 1.56-7.66; P = .002), IGFR overexpression (HR, 2.22; 95% CI, 1.03-4.77; P = .04), liver metastases (HR, 3.55; 95% CI, 1.46-8.65; P = .005), and Eastern Cooperative Oncology Group performance status (ECOG PS) > 1 (HR, 2.57; 95% CI, 1.04-6.34; P = .04) were significantly associated with shorter PFS. Patients with PTEN loss had a median PFS of 6 months (2-year PFS, 11.6%), whereas patients without PTEN loss had a median PFS of 18 months (2-year PFS, 43.6%) (log-rank P < .005). In the multivariate analysis, PTEN loss (HR, 5.92; 95% CI, 2.37-14.81; P < .005), liver metastases (HR, 2.63; 95% CI, 1.06-6.51; P = .037), and ECOG PS > 1 (HR, 2.80; 95% CI, 1.15-6.81; P = .024) were significantly associated with shorter OS. Patients with PTEN loss had a median OS of 6 months (2-year OS, 12.2%), whereas in patients without PTEN loss, OS was not reached (2-year OS, 63.9%) (log-rank P < .0005).Conclusions: A low-cost and reproducible immunohistochemistry assay for PTEN loss analysis represents a potential tool for identifying tumor heterogeneity in patients with advanced EGFR-mutant NSCLC