254 research outputs found
Can IT Innovation become a Tool against Fiscal Crisis? Findings from Europe
ABSTRACT Economic recession has expanded during the last five years from U.S.A. t
p-channel thin-film transistors based on spray-coated Cu2O films
Thin films of cuprous oxide (Cu2O) were grown using solution-based spray pyrolysis in ambient air and incorporated into hole-transporting thin-film transistors. The phase of the oxide was confirmed by X-ray diffraction measurements while the optical band gap of the films was determined to be ∼2.57 eV from optical transmission measurements. Electrical characterization of Cu2O films was performed using bottom-gate, bottom-contact transistors based on SiO2 gate dielectric and gold source-drain electrodes. As-prepared devices show clear p-channel operation with field-effect hole mobilities in the range of 10−4–10−3 cm2 V−1 s−1 with some devices exhibiting values close to 1 × 10−2 cm2 V−1 s−1
Subpicosecond photoinduced Stark spectroscopy in fullerene-based devices
Published versio
Alternating current conduction properties of thermally evaporated alpha-nickel phthalocyanine thin films: Effects of oxygen doping and thermal annealing
Published versio
The influence of backbone fluorination on the dielectric constant of conjugated polythiophenes
The ability to modify or enhance the dielectric constant of semiconducting polymers can prove valuable for a range of optoelectronic and microelectronic applications. In the case of organic photovoltaics, increasing the dielectric constant of the active layer has often been suggested as a method to control charge generation, recombination dynamics, and ultimately, the power conversion efficiencies. In this contribution, the impact that the degree and pattern of fluorination has on the dielectric constant of poly(3-octylthiophene) (P3OT), a more soluble analogue of the widely studied conjugated material poly(3-hexylthiophene), is explored. P3OT and its backbone-fluorinated analogue, F-P3OT, are compared along with a block and alternating copolymer version of these materials. It is found that the dielectric constant of the polymer thin films increases as the degree of backbone fluorination increases, in a trend consistent with density functional theory calculations of the dipole moment
Stress echocardiography in elderly patients with coronary artery disease Applicability, safety and prognostic value of dobutamine and adenosine echocardiography in elderly patients
AbstractObjectives. Our aim was to determine the applicability, safety and prognostic value of adenosine and dobutamine stress echocardiography in patients ≥70 years old.Background. These tests are sometimes mandatory because of difficulties and inaccuracies in interpreting traditional electrocardiographic stress tests. Furthermore, if these tests could be used to avoid coronary arteriography and cardiac catheterization, they would become essential in the care of the elderly, whose numbers are increasing.Methods. We performed coronary arteriography and dobutamine and adenosine stress echocardiographic tests in 120 patients (72 men) ≥70 years old who entered the hospital because of chest pain and had known or suspected coronary artery disease. The stress tests were performed on separate days, within 2 weeks of coronary arteriography. Both the arteriograms and the echocardiograms were analyzed by two experts who had no knowledge of the patients' other data or the other interpreter's report. Tests were judged to have positive or negative results, and the patients were followed up for the development of cardiac events. Univariate and multivariate analyses and other statistical modalities were applied for comparisons.Results. Documented coronary artery disease was found in 89 patients. During the 14 ± 7 months of follow-up, cardiac events developed in 50 patients, including 3 (7.9%) of 38 patients with negative dobutamine and 12 (20.7%) of 58 patients with negative adenosine test results. Demonstration of any abnormality on stress echocardiography was an independent factor for cardiac events, both for dobutamine (relative risk 7.3) and for adenosine (relative risk 3.0). Both cessation of dobutamine or adenosine tests and diagnosis of disease in two or more coronary vessels were also independent predictors. ST segment depression ≥1 mm was related to future events only with the dobutamine test.Conclusions. These echocardiographic stress tests proved safe and well tolerated. They successfully stratified this cohort of elderly patients with coronary artery disease to low or high risk subgroups for subsequent cardiac events
High-efficiency fullerene solar cells enabled by a spontaneously formed mesostructured CuSCN-nanowire heterointerface
Fullerenes and their derivatives are widely used as electron acceptors in bulk-heterojunction organic solar cells as they combine high electron mobility with good solubility and miscibility with relevant semiconducting polymers. However, studies on the use of fullerenes as the sole photogeneration and charge-carrier material are scarce. Here, a new type of solution-processed small-molecule solar cell based on the two most commonly used methanofullerenes, namely [6,6]-phenyl-C61-butyric acid methyl ester (PC 60 BM) and [6,6]-phenyl-C71-butyric acid methyl ester (PC 70 BM), as the light absorbing materials, is reported. First, it is shown that both fullerene derivatives exhibit excellent ambipolar charge transport with balanced hole and electron mobilities. When the two derivatives are spin-coated over the wide bandgap p-type semiconductor copper (I) thiocyanate (CuSCN), cells with power conversion efficiency (PCE) of ≈1%, are obtained. Blending the CuSCN with PC 70 BM is shown to increase the performance further yielding cells with an open-circuit voltage of ≈0.93 V and a PCE of 5.4%. Microstructural analysis reveals that the key to this success is the spontaneous formation of a unique mesostructured p-n-like heterointerface between CuSCN and PC 70 BM. The findings pave the way to an exciting new class of single photoactive material based solar cells
Self-assembly and charge transport properties of a benzobisthiazole end-capped with dihexylthienothiophene units
The synthesis of a new conjugated material is reported; BDHTT–BBT features a central electron-deficient benzobisthiazole capped with two 3,6-dihexyl-thieno[3,2-b]thiophenes. Cyclic voltammetry was used to determine the HOMO (−5.7 eV) and LUMO (−2.9 eV) levels. The solid-state properties of the compound were investigated by X-ray diffraction on single-crystal and thin-film samples. OFETs were constructed with vacuum deposited films of BDHTT–BBT. The films displayed phase transitions over a range of temperatures and the morphology of the films affected the charge transport properties of the films. The maximum hole mobility observed from bottom-contact, top-gate devices was 3 × 10−3 cm2 V−1 s−1, with an on/off ratio of 104–105 and a threshold voltage of −42 V. The morphological and self-assembly characteristics versus electronic properties are discussed for future improvement of OFET devices
Polymer Light‐Emitting Transistors With Charge‐Carrier Mobilities Exceeding 1 cm2 V−1 s−1
The vast majority of conjugated polymer-based light emitting field-effect transistors (LEFETs) are characterized by low charge carrier mobilities typically in the range 10-5 to 10-3 cm2 V-1 s-1 range. Fast carrier transport is a highly desirable characteristic for high frequency LEFET operation and, potentially, for use in electrically-pumped lasers. Unfortunately, high mobility organic semiconductors are often characterised by strong intermolecular π-π interactions that reduce luminescence. Development of new materials and/or device concepts that overcome this hurdle are therefore required. We report single organic semiconductor layer, light-emitting transistors that combine the highest hole mobilities reported to date for any polymer-based LEFET, with encouraging light emission characteristics. We achieve this in a single polymer layer LEFET, which was further enhanced through the use of a small-molecule/conjugated polymer blend system that possesses a film microstructure which supports enhanced charge carrier mobility (3.2 cm2 V-1 s-1) and promising light emission characteristics (1600 cd m-2) as compared to polymer-only based LEFETs. This simple approach represents an attractive strategy to further advance the performance of solution-processed LEFETs
- …