Cell wall microstructure, pore size distribution and absolute density of hemp shiv

This paper, for the first time, fully characterizes the intrinsic physical parameters of hemp shiv including cell wall microstructure, pore size distribution and absolute density. Scanning electron microscopy revealed microstructural features similar to hardwoods. Confocal microscopy revealed three major layers in the cell wall: middle lamella, primary cell wall and secondary cell wall. Computed tomography improved the visualization of pore shape and pore connectivity in three dimensions. Mercury intrusion porosimetry (MIP) showed that the average accessible porosity was 76.67 ± 2.03% and pore size classes could be distinguished into micropores (3–10 nm) and macropores (0.1–1 µm and 20–80 µm). The absolute density was evaluated by helium pycnometry, MIP and Archimedes’ methods. The results show that these methods can lead to misinterpretation of absolute density. The MIP method showed a realistic absolute density (1.45 g cm−3) consistent with the density of the known constituents, including lignin, cellulose and hemi-cellulose. However, helium pycnometry and Archimedes’ methods gave falsely low values owing to 10% of the volume being inaccessible pores, which require sample pretreatment in order to be filled by liquid or gas. This indicates that the determination of the cell wall density is strongly dependent on sample geometry and preparation

In-Beam Background Suppression Shield

The long (3ms) proton pulse of the European Spallation Source (ESS) gives rise to unique and potentially high backgrounds for the instrument suite. In such a source an instrument capabilities will be limited by it's Signal to Noise (S/N) ratio. The instruments with a direct view of the moderator, which do not use a bender to help mitigate the fast neutron background, are the most challenging. For these beam lines we propose the innovative shielding of placing blocks of material directly into the guide system, which allow a minimum attenuation of the cold and thermal fluxes relative to the background suppression. This shielding configuration has been worked into a beam line model using Geant4. We study particularly the advantages of single crystal sapphire and silicon blocks .Comment: 12 pages, 8 figures, proceeding of NDS 2015, 4th International Workshop on Neutron Delivery Systems, 28 -30 September 2015, ILL Grenoble, Franc

Facility for fast neutron irradiation tests of electronics at the ISIS spallation neutron source

The VESUVIO beam line at the ISIS spallation neutron source was set up for neutron irradiation tests in the neutron energy range above 10 MeV. The neutron flux and energy spectrum were shown, in benchmark activation measurements, to provide a neutron spectrum similar to the ambient one at sea level, but with an enhancement in intensity of a factor of 107. Such conditions are suitable for accelerated testing of electronic components, as was demonstrated here by measurements of soft error rates in recent technology field programable gate arrays

Embodied learning: Responding to AIDS in Lesotho's education sector

This is an Author's Accepted Manuscript of an article published in Children's Geographies, 7(1), 2009. Copyright @ 2009 Taylor & Francis, available online at: http://www.tandfonline.com/doi/abs/10.1080/14733280802630981.In contrast to pre-colonial practices, education in Lesotho's formal school system has historically assumed a Cartesian separation of mind and body, the disciplining of students' bodies serving principally to facilitate cognitive learning. Lesotho has among the highest HIV-prevalence rates worldwide, and AIDS has both direct and indirect impacts on the bodies of many children. Thus, students' bodies can no longer be taken for granted but present a challenge for education. Schools are increasingly seen as a key point of intervention to reduce young people's risk of contracting the disease and also to assist them to cope with its consequences: there is growing recognition that such goals require more than cognitive learning. The approaches adopted, however, range from those that posit a linear and causal relationship between knowledge, attitudes and practices (so-called ‘KAP’ approaches, in which the role of schools is principally to inculcate the pre-requisite knowledge) to ‘life skills programmes’ that advocate a more embodied learning practice in schools. Based on interviews with policy-makers and practitioners and a variety of documentary sources, this paper examines a series of school-based AIDS interventions, arguing that they represent a less radical departure from ‘education for the mind’ than might appear to be the case. The paper concludes that most interventions serve to cast on children responsibility for averting a social risk, and to ‘normalise’ aberrant children's bodies to ensure they conform to what the cognitively-oriented education system expects

Improvement of Indoor Air Quality by MDF panels containing walnut shells

High levels of Volatile Organic Compounds (VOCs) and extremes of Relative Humidity (RH) commonly reduce indoor air quality with associated negative effects on human health and wellbeing. Interior materials are known to be one of the main contributors to poor indoor air quality. Notwithstanding, they can also act as a sink for airborne pollutants and excess moisture through adsorption. In this paper, we evaluate the ability of Medium Density Fibreboard (MDF) modified with walnut shell to regulate RH, toluene, limonene, dodecane and formaldehyde. The physicochemical properties, including molecular size/shape, vapour pressure, polarity and boiling point of VOCs allowed them to represent a range of pollutants. Adsorption and desorption behaviour of MDF containing up to 15% walnut shell was evaluated in 2-L environmental chambers under dynamic conditions at 23 °C and 50% RH. The porous microstructure of the MDF and walnut shell and their chemical composition were analysed using SEM, XRD and FTIR. Compared to a control panel, walnut shell additions showed an improved ability to remove VOCs and formaldehyde from the indoor air and buffer humidity. Of particular significance was the irreversible sink effect of formaldehyde and dodecane. This was attributed to the porous surface of walnut shell increasing the specific surface area of the panel and thus its adsorption capacity. The improved capacity of buffer humidity also increased the ability to adsorb water soluble VOCs such as formaldehyde. This research provides for the first time significant evidence that walnut shell modified MDF can improve indoor air quality

A case-control study of cryptorchidism and maternal hormone concentrations in early pregnancy.

Serum samples taken between 6 and 20 weeks of gestation were obtained from 28 mothers who gave birth to cryptorchid sons (cases) and from 108 control mothers. In comparison with controls the cases had 10% higher geometric mean oestradiol (95% CI -13% to +39%: P=0.42) and 10% lower geometric mean testosterone (95% CI -27% to +10%: P=0.30). Among the samples collected between 6 and 14 weeks of gestation geometric mean concentrations of oestradiol and testosterone were 5% lower (95% CI -32% to +31%: P=0.74) and 25% lower (95% CI -45% to +1%: P=0.06) respectively in cases than in controls. Among the samples collected between 15 and 20 weeks of gestation geometric mean concentrations of oestradiol and testosterone were 29% higher (95% CI -8% to +79%: P=0.14) and 21% higher (95% CI -8% to +60%: P=0.18) respectively in cases than in controls. The results do not support the hypothesis that cryptorchidism may be caused by high concentrations of oestradiol in the maternal blood during the first phase of testicular descent, but suggest that the possible association of cryptorchidism with low maternal testosterone during early gestation should be further investigated