330 research outputs found

    Key drivers for copepod assemblages in a eutrophic coastal brackish lake

    Get PDF
    The copepod assemblages and abiotic parameters were investigated at 11 stations in a large coastal lake (Lake Manzalah, Nile Delta) from 2009-2010 in order to verify any impacts of eutrophication and salinity on the copepod species composition. The environmental conditions and the copepod assemblages appeared to have changed in comparison with previous studies, possibly because of increasing eutrophication and invasions of non-indigenous species (NIS). The aim of the present study was the identification of species which can be used as ecological indicators of high trophic status. Among the nine copepod species of Lake Manzalah, Acartia tonsa, Mesocyclops ogunnus, and Apocyclops panamensis were reported for the first time. Acartia tonsa, a well-known NIS for the Mediterranean, numerically dominated the copepod assemblages in some portions of the lake. The distribution of Acanthocyclops trajani and Thermocyclops consimilis was insensible to eutrophication because they can stand high levels of nutrients and hypoxia. Compared with previous reports, the copepod assemblage of Lake Manzalah was richer in species. The invasions of NIS, in addition to the heterogeneous progress of eutrophication in the lake, created an environmental mosaic with many species in total, but with single areas suitable for only a small number of them

    A textile platform using mechanically reinforced hydrogel fibres towards engineering tendon niche

    Get PDF
    INTRODUCTION: Tendon injuries can result from tendon overuse or trauma, resulting in substantial pain and disability. Given that natural or surgical repair of tendons lead to a poor outcome in terms of mechanical properties and functionality, there is a great need for tissue engineering strategies. Textile platforms enable the generation of biomimetic constructs [1]. Therefore, the main goal of this study is the development of cell-laden hybrid hydrogel fibers reinforced with a mechanically robust core fiber and their assembly into braided constructs towards replicating tendon mechanical properties and architecture. METHODS: To fabricate mechanically reinforced hydrogel fibres, a commercially available suture was coated using a cell-hydrogel mixture of methacryloyl gelatine (GelMA) and alginate. Composite fibres (CFs) were obtained by ionic crosslinking of alginate followed by photocrosslinking of GelMA. CFs were assembled using braiding technique and the mechanical properties of single fibres and braided constructs were evaluated. Different cells were encapsulated in the hydrogel layer, including MC-3T3, mesenchymal stem cells (MSCs) and human tendon-derived cells (TDCs). Cell viability and metabolic activity were evaluated by LIVE/DEAD staining and presto blue assay of metabolic activity. The expression of tendon-related markers and matrix deposition were also investigated. RESULTS: CFs were fabricated with a GelMA:alginate hydrogel layer and using multifilament twisted cotton or biodegradable suturing threads. The biocompatibility of this system was evaluated on encapsulated cells (Fig.1a). Cells (MC-3T3, MSCs and TDCs) were homogeneously distributed along the hydrogel layer, being viable up to 14 days in culture. In addition, TDCs were spreading inside the hydrogel after less than 48 h. Moreover, to further improve the mechanical properties of CFs, braided constructs were generated (Fig. 1b). Braiding CFs together enhanced their tensile strength and the process did not affect the viability of encapsulated cells.DISCUSSION & CONCLUSIONS: CFs were generated with a load bearing core and a hydrogel layer towards mimicking both mechanical properties and the matrix-rich microenvironment of tendon tissue. Accordingly, cell behaviour can be further modulated by modifying the hydrogel composition or, ultimately, through the addition of bioactive cues. Finally, braiding CFs together allows tuning the mechanical properties of developed constructs to match those of native tendon tissues.Fundação para a Ciência e a Tecnologia in the framework of FCT-POPH-FSE, the PhD grant SFRH/BD/96593/2013 of R.C-

    A Concerted HIF-1α/MT1-MMP Signalling Axis Regulates the Expression of the 3BP2 Adaptor Protein in Hypoxic Mesenchymal Stromal Cells

    Get PDF
    Increased plasticity, migratory and immunosuppressive abilities characterize mesenchymal stromal cells (MSC) which enable them to be active participants in the development of hypoxic solid tumours. Our understanding of the oncogenic adaptation of MSC to hypoxia however lacks the identification and characterization of specific biomarkers. In this study, we assessed the hypoxic regulation of 3BP2/SH3BP2 (Abl SH3-binding protein 2), an immune response adaptor/scaffold protein which regulates leukocyte differentiation and motility. Gene silencing of 3BP2 abrogated MSC migration in response to hypoxic cues and generation of MSC stably expressing the transcription factor hypoxia inducible factor 1alpha (HIF-1α) resulted in increased endogenous 3BP2 expression as well as cell migration. Analysis of the 3BP2 promoter sequence revealed only one potential HIF-1α binding site within the human but none in the murine sequence. An alternate early signalling cascade that regulated 3BP2 expression was found to involve membrane type-1 matrix metalloproteinase (MT1-MMP) transcriptional regulation which gene silencing abrogated 3BP2 expression in response to hypoxia. Collectively, we provide evidence for a concerted HIF-1α/MT1-MMP signalling axis that explains the induction of adaptor protein 3BP2 and which may link protein binding partners together and stimulate oncogenic MSC migration. These mechanistic observations support the potential for malignant transformation of MSC within hypoxic tumour stroma and may contribute to evasion of the immune system by a tumour

    The lectin concanavalin-A signals MT1-MMP catalytic independent induction of COX-2 through an IKKγ/NF-κB-dependent pathway

    Get PDF
    The lectin from Canavalia ensiformis (Concanavalin-A, ConA), one of the most abundant lectins known, enables one to mimic biological lectin/carbohydrate interactions that regulate extracellular matrix protein recognition. As such, ConA is known to induce membrane type-1 matrix metalloproteinase (MT1-MMP) which expression is increased in brain cancer. Given that MT1-MMP correlated to high expression of cyclooxygenase (COX)-2 in gliomas with increasing histological grade, we specifically assessed the early proinflammatory cellular signaling processes triggered by ConA in the regulation of COX-2. We found that treatment with ConA or direct overexpression of a recombinant MT1-MMP resulted in the induction of COX-2 expression. This increase in COX-2 was correlated with a concomitant decrease in phosphorylated AKT suggestive of cell death induction, and was independent of MT1-MMP’s catalytic function. ConA- and MT1-MMP-mediated intracellular signaling of COX-2 was also confirmed in wild-type and in Nuclear Factor-kappaB (NF-κB) p65−/− mutant mouse embryonic fibroblasts (MEF), but was abrogated in NF-κB1 (p50)−/− and in I kappaB kinase (IKK) γ−/− mutant MEF cells. Collectively, our results highlight an IKK/NF-κB-dependent pathway linking MT1-MMP-mediated intracellular signaling to the induction of COX-2. That signaling pathway could account for the inflammatory balance responsible for the therapy resistance phenotype of glioblastoma cells, and prompts for the design of new therapeutic strategies that target cell surface carbohydrate structures and MT1-MMP-mediated signaling. Concise summary Concanavalin-A (ConA) mimics biological lectin/carbohydrate interactions that regulate the proinflammatory phenotype of cancer cells through yet undefined signaling. Here we highlight an IKK/NF-κB-dependent pathway linking MT1-MMP-mediated intracellular signaling to the induction of cyclooxygenase-2, and that could be responsible for the therapy resistance phenotype of glioblastoma cells

    Role of dendrimers in advanced drug delivery and biomedical applications: a review

    No full text
    Aim: Dendrimers dendritic structural design holds vast promises, predominantly for drug delivery, owing to their unique properties. Dendritic architecture is widespread topology found in nature and offers development of specific properties of chemical substances. Dendrimers are an ideal delivery vehicle candidate for open study of the effects of polymer size, charge, and composition on biologically relevant properties such as lipid bilayer interactions, cytotoxicity, bio-distribution, internalization, blood plasma retention time, and filtration. This article reviews role of dendrimers in advanced drug delivery and biomedical applications. Key Words: dendrimers, drug delivery vehicle, lipid bilayer interactions, dendritic architecture

    A tissue-engineered human trabecular meshwork hydrogel for advanced glaucoma disease modeling

    Get PDF
    Abnormal human trabecular meshwork (HTM) cell function and extracellular matrix(ECM) remodeling contribute to HTM stiffening in primary open-angle glaucoma (POAG). Most current cellular HTM model systems do not sufficiently replicate the complex native three dimensional (3D) cell-ECM interface, limiting their use for investigating POAG pathology. Tissue-engineered hydrogels are ideally positioned to overcome shortcomings of current models. Here, we report a novel biomimetic HTM hydrogel and test its utility as a POAG disease model. HTM hydrogels were engineered by mixing normal donor-derived HTM cells with collagen type I, elastin-like polypeptide and hyaluronic acid, each containing photoactive functional groups, followed by UV crosslinking. Glaucomatous conditions were induced with dexamethasone (DEX), and effects of the Rho-associated kinase (ROCK) inhibitor Y27632 on cytoskeletal organization and tissue-level function, contingent on HTM cell-ECM interactions, were assessed. DEX exposure increased HTM hydrogel contractility, f-actin and alpha smooth muscle actin abundance and rearrangement, ECM remodeling, and fibronectin deposition - all contributing to HTM hydrogel condensation and stiffening consistent with glaucomatous HTM tissue behavior. Y27632 treatmentproduced precisely the opposite effects and attenuated the DEX-induced pathologic changes, resulting in HTM hydrogel relaxation and softening. For model validation, confirmed glaucomatous HTM (GTM) cells were encapsulated; GTM hydrogels showed increased contractility, fibronectin deposition, and stiffening vs. normal HTM hydrogels despite reduced GTM cell proliferation. We have developed a biomimetic HTM hydrogel model for detailed investigation of 3D cell-ECM interactions under normal and simulated glaucomatous conditions. Its bidirectional responsiveness to pharmacological challenge and rescue suggests promising potential to serve as screening platform for new POAG treatments with focus on HTM biomechanics

    Glass groups, glass supply and recycling in late Roman Carthage

    Get PDF
    Carthage played an important role in maritime exchange networks during the Roman and late antique periods. One hundred ten glass fragments dating to the third to sixth centuries CE from a secondary deposit at the Yasmina Necropolis in Carthage have been analysed by electron microprobe analysis (EPMA) to characterise the supply of glass to the city. Detailed bivariate and multivariate data analysis identified different primary glass groups and revealed evidence of extensive recycling. Roman mixed antimony and manganese glasses with MnO contents in excess of 250 ppm were clearly the product of recycling, while iron, potassium and phosphorus oxides were frequent contaminants. Primary glass sources were discriminated using TiO2 as a proxy for heavy minerals (ilmenite/spinel), Al2O3 for feldspar and SiO2 for quartz in the glassmaking sands. It was thus possible to draw conclusions about the chronological and geographical attributions of the primary glass types. Throughout much of the period covered in this study, glassworkers in Carthage utilised glass from both Egyptian and Levantine sources. Based on their geochemical characteristics, we conclude that Roman antimony and Roman manganese glasses originated from Egypt and the Levant, respectively, and were more or less simultaneously worked at Carthage in the fourth century as attested by their mixed recycling (Roman Sb-Mn). In the later fourth and early fifth centuries, glasses from Egypt (HIMT) and the Levant (two Levantine I groups) continued to be imported to Carthage, although the Egyptian HIMT is less well represented at Yasmina than in many other late antique glass assemblages. In contrast, in the later fifth and sixth centuries, glass seems to have been almost exclusively sourced from Egypt in the form of a manganese-decolourised glass originally described and characterised by Foy and colleagues (2003). Hence, the Yasmina assemblage testifies to significant fluctuations in the supply of glass to Carthage that require further attention
    corecore