Photocatalytic degradation of methyl-red by immobilised nanoparticles of TiO2 and ZnO

none6noIn this work, we report on the degradation of methyl-red (2-(4-Dimethylamino-phenylazo)-benzoic acid - C.I. 13020) under UV irradiation in the presence of nanosized ZnO and TiO2. Oxide nanocrystals with controlled size were synthesised by using non-hydrolytic approaches and tested for the photocatalysed degradation. The performances of the immobilised nanoparticles were compared with their commercial counterparts after immobilization onto a solid support. The influence of some experimental conditions, namely pH and dye concentration, were investigated by monitoring the dye decoloration spectrophotometrically. Several intermediate by-products were identified by HPLC-MS, showing that two different mechanisms were operative during the photocatalytic oxidationsee at: http://www.iwaponline.com/wst/04904/wst049040183.htmopenR. COMPARELLI; P. D. COZZOLI; M. L. CURRI; A. AGOSTIANO; G. MASCOLO; G. LOVECCHIOR., Comparelli; Cozzoli, Pantaleo Davide; M. L., Curri; A., Agostiano; G., Mascolo; G., Lovecchi

UV and solar-based photocatalytic degradation of organic pollutants by nano-sized TiO2 grown on carbon nanotubes

Anew photocatalyst based on nano-sized TiO2 supported on single wall carbon nanotubes (SWCNTs) with tailored photocatalytic properties upon irradiation by both UV and solar simulated light was successfully employed for the degradation of a mixture of 22 organic pollutants in both ultrapure water and real secondary wastewater effluent. First-order degradation rates showed that under UV irradiation nanosized TiO2 supported on SWCNTs is much more effective than conventional Degussa P25 for degradation of iopamidol, iopromide, diatrizoic acid, diclofenac, triclosan and sulfamethoxazole in ultrapure water. For the remaining organics the degradation rates were comparable being in most of the cases Degussa P25 slightly more effective than nano-sized TiO2 supported on SWCNTs. Reactions performed in real secondary wastewater effluent showed a general reduction of degradation rates. Specifically, such a reduction was in the range 9-87% and 9-96% for the Degussa P25 and the nano-sized TiO2 supported on SWCNTs, respectively. Overall, the nano-sized TiO2 supported on SWCNTs under UV irradiation displayed comparable degradation rates with respect to convention Degussa P25. Under simulated solar irradiation the new prepared photocatalyst showed lower efficiency than Degussa P25 in ultrapure water. Such a gap was greatly reduced when the reactions were carried out in real secondary wastewater effluent. The nano-sized TiO2 supported on SWCNTs demonstrated to have the addition benefit to be easily removed from the aqueous solution by a mild centrifugation or a filtration step and, consequently, can be reused for a further photocatalytic treatment batch. Therefore, the obtained results showed that new photocatalyst based on nano-sized TiO2 supported on SWCNTs has proved to be a promising candidate to be used in a photocatalytic based-AOP and to be integrated with a biological step for the effective removal of emerging organic pollutants

Photocatalytic TiO2-Based Nanostructured Materials for Microbial Inactivation

Pathogenic microorganisms can spread throughout the world population, as the currentCOVID-19 pandemic has dramatically demonstrated. In this scenario, a protection against pathogensand other microorganisms can come from the use of photoactive materials as antimicrobial agents ableto hinder, or at least limit, their spreading by means of photocatalytically assisted processes activatedby light—possibly sunlight—promoting the formation of reactive oxygen species (ROS) that can killmicroorganisms in different matrices such as water or different surfaces without affecting humanhealth. In this review, we focus the attention on TiO2nanoparticle-based antimicrobial materials,intending to provide an overview of the most promising synthetic techniques, toward possiblelarge-scale production, critically review the capability of such materials to promote pathogen (i.e.,bacteria, virus, and fungi) inactivation, and, finally, take a look at selected technological applications

CsPbBr3 Nanocrystals-Based Polymer Nanocomposite Films: Effect of Polymer on Spectroscopic Properties and Moisture Tolerance

Metal halide perovskites nanocrystals (NCs) represent an emerging class of materials that find increasing application in optoelectronic and photovoltaic devices, thanks to their intriguing optical properties, including high absorption coefficient, high fluorescence quantum yield (PL QY) and fast charge carrier separation. However, their opening to market is still hindered by their limited reliability, due to an intrinsic structural instability and degradation of their photophysical properties upon air, moisture, and light exposure. The incorporation of perovskite NCs in polymer matrix can limit some of the NC instability issues, with advantages in film processability, device fabrication and mechanical performance, being also useful for fundamental studies. In this regard, here, nanocomposites based on polymethylmethacrylate or polystyrene embedding all-inorganic CsPbBr3 NCs have been prepared and processed in the form of flexible free-standing films. A systematic spectrofluorimetric study, comprising steady state photoluminescence (PL), PL quantum yield (QY) and PL decay of the free-standing films before and after exposure to relative humidity condition (RH% 85%, at 25 °C) is performed and discussed. Phase segregation phenomena, changes in NC passivation and recombination dynamics are evaluated as a function of polymer loading and its molecular structure and finally the efficacy of the polymer as moisture barrier investigate

Eudragit s100 entrapped liposome for curcumin delivery: Anti-oxidative effect in Caco-2 cells

Curcumin is a natural polyphenol with strong antioxidant activity. However, this molecule shows a very poor bioavailability, instability, and rapid metabolism in vivo. In this work curcumin was loaded in Eudragit-coated liposomes to create a gastroresistant carrier, able to protect its load from degradation and free it at the site of absorption in the colon region. Small unilamellar vesicles were prepared and coated with Eudragit by a pH-driven method. The physico-chemical properties of the prepared systems were assessed by light scattering, transmission electron microscopy, infrared spectroscopy, and differential scanning calorimetry. The uptake of vesicles by Caco-2 cells and the anti-oxidant activity in cells were evaluated. The produced vesicles showed dimensions of about forty nanometers that after covering with Eudragit resulted to have micrometric dimensions at acid pH. The experiments showed that at pH > 7.0 the polymeric coating dissolves, releasing the nanometric liposomes and allowing them to enter Caco-2 cells. Delivered curcumin loaded vesicles were then able to decrease significantly ROS levels as induced by H2O2 in Caco-2 cells. The proposed work showed the possibility of realizing effective gastroresistant curcumin liposome formulations for the delivery of antioxidant molecules to Caco-2 cells, potentially applicable to the treatment of pathological conditions related to intestinal oxidative stress. View Full-Tex

Luminescent Oil-Soluble Carbon Dots toward White Light Emission: A Spectroscopic Study

Carbon dots (C-dots) are emerging as new emitting nanomaterials for optoelectronics, bioimaging, and biosensing thanks to their high quantum yield (QY), biocompatibility, low toxicity, and cost-effective sources. Although the origin of their photoluminescence (PL) mechanism (i.e., their strong blue-green emission and excitation dependent fluorescence) is still controversial, it has been demonstrated to depend on the synthetic protocols and experimental conditions, able to modify the surface properties. Here oil-dispersible C-dots, synthesized by carbonization of citric acid in the presence of hexadecylamine in high boiling organic solvent, are thoroughly investigated by systematically controlling the synthetic reaction parameters. Similarly to what was found for water-soluble C-dots, citric acid in the presence of amine-containing passivating agents improves the PL emission of C-dots via the formation of molecular fluorescent derivatives alongside the carbonization process. We demonstrate that at growth temperature of 200 °C such C-dots exhibit an interesting and intense white emission, when excited in the blue region, thus resulting in a biocompatible colloidal white emitting single nano-objects. The incorporation of the nanoparticles in a poly(methyl methacrylate) (PMMA) host matrix, to obtain free-standing nanocomposite films, is demonstrated not to affect the color point, which still falls in the white color region of the 1931 CIE diagram. Remarkably, the emission properties are retained even after several months of films exposure to air and sunlight, thus confirming the color stability of the nanoparticles against aging

Photo-thermal effects in gold nanorods/DNA complexes

n/

Molecular interactions, characterization and photoactivity of Chlorophyll a/chitosan/2-HP-β-cyclodextrin composite films as functional and active surfaces for ROS production

Novel photosensitizing film based on the natural hybrid polymer Chitosan/2-hydroxy-propyl-β-Cyclodextrin (CH/CD) is synthesized introducing Chlorophyll a (CH/CD/Chla) as a photoactive agent for possible application in antimicrobial photodynamic therapy (PDT). The polymer absorbs visible light, in turn able to generate reactive oxygen species (ROS) and, therefore it can be used as environmental friendly and biodegradable polymeric photosensitizer (PS). The modified film is characterized by means of different spectroscopic, calorimetric, diffraction techniques and microscopic imaging methods including time-resolved absorption spectroscopy. UV–Vis, FTIR-ATR and X-ray Photoelectron Spectroscopy (XPS) analyses suggest that Chla shows a strong affinity toward Chitosan introducing interactions with amino groups present on the polymer chains. Nanosecond laser flash photolysis technique provides evidence for the population of the excited triplet state of Chla. Photogeneration of singlet oxygen is demonstrated by both direct detection by using infrared luminescence spectroscopy and chemical methods based on the use of suitable traps. Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Differential Scanning Calorimetry (DSC) analyses confirm also the occurrence of structural changes both on the film surface and within the film layer induced by the insertion of the pigment. Moreover, X-ray Diffraction data (XRD) shows the existence of an amorphous phase for the chitosan films in all the compared conditions

Preparation of drug-loaded small unilamellar liposomes and evaluation of their potential for the treatment of chronic respiratory diseases

The aim of the present investigation was to evaluate the influence of liposome formulation on the ability of vesicles to penetrate a pathological mucus model obtained from COPD affected patients in order to assess the potential of such vesicles for the treatment of chronic respiratory diseases by inhalation. Therefore, Small Unilamellar Liposomes (PLAIN-LIPOSOMEs), Pluronic® F127- surface modified liposomes (PF-LIPOSOMEs) and PEG 2000PE-surface modified liposomes (PEG-LIPOSOMEs) were prepared using the micelle-to-vesicle transition (MVT) method and beclomethasone dipropionate (BDP) as model drug. The obtained liposomes showed diameters in the range of 40-65 nm, PDI values between 0.25-0.30 and surface electric charge essentially close to zero. The encapsulation efficiency was found to be dependent on the BDP/lipid ratio used and, furthermore, BDP-loaded liposomes were stable in size both at 37°C and at 4°C. All liposomes were not cytotoxic on H441 cell line as assessed by the MTT assay. The liposome uptake was evaluated through a cytofluorimetric assay that showed a non-significant reduction in the internalization of PEG-LIPOSOMEs as compared with PLAIN-LIPOSOMEs. The penetration studies of mucus from COPD patients showed that the PEG-LIPOSOMEs were the most mucuspenetrating vesicles after 27 hours. In addition, PEG- and PF-LIPOSOMEs did not cause any effect on bronchoalveolar lavage fluid proteins after aerosol administration in the mouse. The results highlight that PEG-LIPOSOMEs show the most interesting features in terms of penetration through the pathologic sputum, uptake by airway epithelial cells and safety profile