STH/CFD coupled simulation of the protected loss of flow accident in the CIRCE-HERO facility

The paper presents the application of a coupling methodology between Computational Fluid Dynamics (CFD) and System Thermal Hydraulic (STH) codes developed at the University of Pisa. The methodology was applied to the CIRCE-HERO facility in order to reproduce the recently performed experimental conditions simulating a Protected Loss Of Flow Accident (PLOFA). The facility consists of an internal loop, equipped with a fuel pin simulator and a steam generator, and an external pool. In this coupling application, the System code RELAP5 is adopted for the simulation of the internal loop while the CFD code ANSYS Fluent is used for the sake of simulating the pool. The connection between the two addressed domains is provided at the inlet and outlet section of the internal loop; a thermal coupling is also performed in order to reproduce the observed thermal stratification phenomenon. The obtained results are promising and a good agreement was obtained for both the mass flow rates and temperature measurements. Capabilities and limitations of the adopted coupling technique are discussed in the present paper also providing suggestions for improvements and developments to be achieved in the frame of future applications

Numerical analysis of the CIRCE-HERO PLOFA scenarios

The present work deals with simulations carried out at the University of Pisa by using the System Thermal Hydraulics code RELAP5/Mod3.3 to support the experimental campaign conducted at the ENEA (Energia Nucleare ed Energie Alternative) Brasimone Research Centre on the CIRColazione Eutettico—Heavy liquid mEtal pRessurized water cOoled tubes (CIRCE-HERO) facility. CIRCE is an integral effect pool type facility dedicated to the study of innovative nuclear systems and cooled by heavy liquid metal, while HERO is a heat exchanger heavy liquid metal/ pressurized cooling water system hosted inside the CIRCE facility. Beside the H2020 project Multi-Purpose Hybrid Research Reactor for High-Tech Applications (MYRRHA) Research and Transmutation Endeavour (MYRTE), a series of experiments were performed with the CIRCE-HERO facility, for both nominal steady-state settings and accidental scenarios. In this framework, the RELAP5/Mod3.3 code was used to simulate the experimental tests assessing the heat losses of the facility and analyzing the thermal hydraulics phenomena occurring during the postulated Protected Loss Of Flow Accident (PLOFA). The modified version Mod. 3.3 of the source code RELAP5 was developed by the University of Pisa to include the updated thermo–physical properties and convective heat transfer correlations suitable for heavy liquid metals. After reproducing the facility through an accurate nodalization, boundary conditions were applied according to the experiments. Then, the PLOFA scenarios were reproduced by implementing the information obtained by the experimental campaign. Sensitivity analyses of the main parameters affecting the thermofluidynamics of the Lead-Bismuth Eutectic (LBE) were carried out. In the simulated scenario, the LBE mass flow rate strongly depends on the injected argon flow time trend. The numerical results are in agreement with the experimental data, however further investigations are planned to analyze the complex phenomena involved

Characterization of yateí (Tetragonisca fiebrigi) honey and preservation treatments: Dehumidification, pasteurization and refrigeration

A complete study on the microbiological and physico-chemical properties of yateí honey (Tetragonisca fiebrigi) was carried out, focusing on the quality standards that are necessary for its commercialization. The results showed that physico-chemical and microbiological parameters of T. fiebrigi honey differed from standard values of Apis mellifera, but not from other stingless bees honey from South America. Yateí honey showed the presence of fecal contamination (Escherichia coli), and a seasonal influence in microbiological parameters, acidity, pH, sucrose and diastase activity. On the other hand, three preservation treatments were carried out and evaluated for 90 days in T. fiebrigi honey: refrigeration, pasteurization and dehumidification. Pasteurization and dehumidification of yateí honey eliminated fecal contamination while in refrigerated honey E. coli survived in time (8–90 days), unlike the samples kept at room temperature (<3 days). Physico-chemical parameters of yateí honey changed in time after the treatments, specifically, HMF was present after 90 days in honey treated with heat or dehumidified, making it a key parameter of yateí honey quality.Fil: Schvezov, Natasha. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste. Instituto de Biología Subtropical. Instituto de Biología Subtropical - Nodo Posadas | Universidad Nacional de Misiones. Instituto de Biología Subtropical. Instituto de Biología Subtropical - Nodo Posadas; Argentina. Universidad Nacional de Misiones; ArgentinaFil: Pucciarelli Roman, Amada Beatriz. Universidad Nacional de Misiones; ArgentinaFil: Valdes, Belen. Universidad Nacional de Misiones; ArgentinaFil: Dallagnol, Andrea Micaela. Universidad Nacional de Misiones; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste. Instituto de Materiales de Misiones. Universidad Nacional de Misiones. Facultad de Ciencias Exactas Químicas y Naturales. Instituto de Materiales de Misiones; Argentin

The environmental benefits of circular economy strategies in the nuclear industry: A Life Cycle Assessment study

In the United Kingdom, nuclear energy is poised to play a key role in decarbonising the power generation sector in the coming decades. The management of nuclear wastes generated from the nuclear fuel cycle represents a hotly debated topic. The amount of nuclear wastes, and thus the associated environmental impacts, could be minimized via implementation of circular economy approaches. This work builds upon extensive research efforts conducted in the past years at University College London (UCL) in collaboration with the National Nuclear Laboratory, which, among other achievements, led to the development of a pioneering model for assessing radiological impacts in LCA. Here, we demonstrate how Life Cycle Assessment (LCA) can be used in the nuclear industry to investigate the environmental benefits of two circular economy strategies that aim at reducing the amount of intermediate level waste to be disposed of in a geological disposal facility. The first case study focuses on a novel technology developed in the US for recycling Zircaloy™ wastes, which are used as cladding of nuclear fuels. The second case study investigates the environmental benefits of using depleted uranium to produce uranyl nitrate - a key chemical used to separate plutonium from uranium when recycling used nuclear fuels. The environmental impacts are quantified using the Environmental Footprint 2.0 method and the UCL model for radiological impacts. Our results show that both circular approaches outperform conventional ones across all environmental categories. This is not only because they bring a reduction in the amount of waste to be disposed of, but also because they are assumed to induce a reduction in the demand for mining of primary zirconium and uranium. When both approaches are combined, the environmental benefits range from 4% in the category freshwater and up to 94% in the category resource use, energy carriers (see Figure 1). Please click Additional Files below to see the full abstract

Simulation of operational conditions of HX-HERO in the CIRCE facility with CFD/STH coupled codes

Abstract The paper describes the application of a coupled methodology between Fluent CFD code and RELAP5 System Thermal-Hydraulic code developed at the DICI (Dipartimento di Ingegneria Civile e Industriale) of the University of Pisa. The methodology was applied specifically to the LBE-water heat exchanger HERO located inside the S100 vessel of the CIRCE facility, built at ENEA Brasimone Research Centre, to investigate the capabilities of this component. In the proposed methodology, the primary side of the HX-HERO, containing LBE, is simulated by the CFD code, while the secondary side, containing a two phase mixture of water and vapour, is reproduced by the System Thermal-Hydraulic code. During the calculation the two codes exchange, at the coupled boundaries: the bulk temperature and heat transfer coefficient of the ascending water (RELAP5 to Fluent) and the wall temperature at the water side surface of the pipes (Fluent to RELAP5). The coupling technique was tested by comparing the numerical results with the experimental data recently obtained by ENEA; the numerical results predicted well the qualitative trend of the temperature and provided an overall good prediction of the temperature also from a quantitative point of view. It is worth noticing that this good performance remained reliable for all the cases simulated, proving the general applicability of the methodology

Relationship between hospital volume and short-term outcomes: A nationwide population-based study including 75,280 rectal cancer surgical procedures

There is growing interest on the potential relationship between hospital volume (HV) and outcomes as it might justify the centralization of care for rectal cancer surgery. From the National Italian Hospital Discharge Dataset, data on 75,280 rectal cancer patients who underwent elective major surgery between 2002 and 2014 were retrieved and analyzed. HV was grouped into tertiles: low-volume performed 1-12, while high-volume hospitals performed 33+ procedures/year. The impact of HV on in-hospital mortality, abdominoperineal resection (APR), 30-day readmission, and length of stay (LOS) was assessed. Risk factors were calculated using multivariate logistic regression. The proportion of procedures performed in low-volume hospitals decreased by 6.7 percent (p<0.001). The rate of in-hospital mortality, APR and 30-day readmission was 1.3%, 16.3%, and 7.2%, respectively, and the median LOS was 13 days. The adjusted risk of in-hospital mortality (OR = 1.49, 95% CI = 1.25-1.78), APR (OR 1.10, 95%CI 1.02-1.19), 30-day readmission (OR 1.49, 95%CI 1.38-1.61), and prolonged LOS (OR 2.29, 95%CI 2.05-2.55) were greater for low-volume hospitals than for high-volume hospitals. This study shows an independent impact of HV procedures on all short-term outcome measures, justifying a policy of centralization for rectal cancer surgery, a process which is underwa

Fecal proteomic analysis in healthy dogs and in dogs suffering from food responsive diarrhea

Different laboratory markers are routinely used in the diagnosis and management of gastrointestinal (GI) disease in dogs. In the present study, starting from feces from both healthy dogs and dogs suffering from food responsive diarrhea (FRD), we tried to find proteins differently expressed in the two groups of dogs, by using a proteomic approach. Interestingly, we found that the immunoglobulin J-chain isoform 1 (species: Canis lupus familiaris) was identified only in diseased dogs (not in healthy). J-chain combines especially IgA monomers to IgA dimers and plays a crucial role for their secretions into mucosal interface. Being the first study of that kind in the dog, it is only possible to hypothesize that their presence could be likely due to an increased activation of the immune system or to a mucosal damage or both in FRD patients. Similarly, it is still impossible to assess whether this protein could be used as diagnostic/prognostic marker of GI disease; however, this study represents a promising first step toward fecal proteomics in canine GI disorders

Análisis microbiológico y fisicoquímico de la miel de yateí (tetragonisca angustula) para la evaluación de estándares de calidad y comercialización

Debido al interés en la producción y comercialización de la miel de yateí (Tetragonisca angustula) en la provincia de Misiones, Argentina, en este trabajo se evaluaron parámetros microbiológicos y fisicoquímicos con el fin de contribuir con la elaboración de normas para el control de calidad y promover su comercialización. Los resultados demostraron que los parámetros analizados en esta miel (n = 28) diferían significativamente de los valores aceptables establecidos para la miel de Apis mellífera. En comparación, se observó que los valores de pH (3,72) y de concentración de glucosa (19,01 g/100 g) y fructosa (23,74 g/100 g) eran más bajos, mientras que los valores de acidez (79,42 meq/kg) y humedad (24 %), al igual que el recuento de hongos y levaduras (HyL) (3,02 log UFC/g), eran más altos. La acidez mostró una correlación inversamente proporcional con el contenido de glucosa (R2 = 0,75) y fructosa (R2 = 0,68), y directamente proporcional con el recuento de HyL, aunque en este caso la correlación fue menor (R2 = 0,45). En lo que respecta a los parámetros microbiológicos, se observó 42,85 % de Clostridium sulfito-reductores y 39 % de Bacillus spp., y no se detectó presencia de C. botulinum ni de B. cereus. Enterococcus spp. y Staphylococcus spp. se encontraron en una proporción similar (ca. 7,14 %), mientras que Escherichia coli y Salmonella spp. no fueron detectados. Concluimos que las propiedades microbiológicas y fisicoquímicas de la miel de yateí difieren de las de la miel de A. mellifera, por lo cual sería oportuno establecer normas de calidad diferentes para facilitar su comercialización.Due to the interest in the production and trading of yateí (Tetragonisca angustula) honey in the province of Misiones, Argentina, in this work we assessed microbiological and physicochemical parameters in order to contribute to the elaboration of standards for quality control and promote commercialization. Results showed that yateí honey samples had significantly different microbiological and physicochemical characteristics in comparison to established quality standards for Apis mellifera honey. Thus, we observed that values for pH (3.72), glucose (19.01 g/100 g) and fructose (23.74 g/100 g) were lower than A. mellifera quality standards, while acidity (79.42 meq/kg), moisture (24%), and mould and yeast count (MY) (3.02 log CFU/g) were higher. The acid content was correlated with glucose (R2=0.75) and fructose (R2=0.68) content, and also with mould and yeast counts (R2=0.45) to a lesser extent. The incidence of microorganisms in yateí honey samples reached 42.85% and 39% for Clostridium sulfite-reducers and Bacillus spp., respectively. No C. botulinum or B. cereus cells were detected. Enterococcus spp. and Staphylococcus spp. incidence was similar (ca. 7.14%), whereas Escherichia coli and Salmonella spp. were not detected. We conclude that the microbiological and physicochemical properties of yateí honey are different from those of A. mellifera honey; hence, different quality standards could be implemented to promote its commercialization. Análisis microbiológico y fi sicoquímico de la miel de yateí (Tetragonisca angustula) para la evaluación de stándares de calidad y comercializaciónFil: Pucciarelli Roman, Amada Beatriz. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales; ArgentinaFil: Schapovaloff, María Elena. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Kummritz, Silvana Janette. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales; ArgentinaFil: Señuk, Isabel A.. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales; ArgentinaFil: Brumovsky, Luis Alberto. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales; ArgentinaFil: Dallagnol, Andrea Micaela. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

Chest CT Features of COVID-19 in Rome, Italy

Background The standard for diagnosis of SARS-CoV-2 virus is reverse transcription polymerase chain reaction (RT-PCR) test, but chest CT may play a complimentary role in the early detection of COVID-19 pneumonia. Purpose To investigate CT features of patients with COVID-19 in Rome, Italy, and to compare the accuracy of CT with RT-PCR. Methods In this prospective study from March 4, 2020, until March 19, 2020, consecutive patients with suspected COVID-19 infection and respiratory symptoms were enrolled. Exclusion criteria were: chest CT with contrast medium performed for vascular indications, patients who refused chest CT or hospitalization, and severe CT motion artifact. All patients underwent RT-PCR and chest CT. Diagnostic performance of CT was calculated using RT-PCR as reference. Chest CT features were calculated in a subgroup of RT-PCR-positive and CT-positive patients. CT features of hospitalized patients and patient in home isolation were compared by using Pearson chi squared test. Results Our study population comprised 158 consecutive study participants (83 male and 75 female, mean age 57 y ±17). Fever was observed in 97/158 (61%), cough in 88/158 (56%), dyspnea in 52/158 (33%), lymphocytopenia in 95/158 (60%), increased C-reactive protein level in 139/158 (88%), and elevated lactate dehydrogenase in 128/158 (81%) study participants. Sensitivity, specificity, and accuracy of CT were 97% (60/62)[95% IC, 88-99%], 56% (54/96)[95% IC,45-66%] and 72% (114/158)[95% IC 64-78%], respectively. In the subgroup of RT-PCR-positive and CT-positive patients, ground-glass opacities (GGO) were present in 58/58 (100%), multilobe and posterior involvement were both present in 54/58 (93%), bilateral pneumonia in 53/58 (91%), and subsegmental vessel enlargement (&gt; 3 mm) in 52/58 (89%) of study participants. Conclusion The typical pattern of COVID-19 pneumonia in Rome, Italy, was peripherally ground-glass opacities with multilobe and posterior involvement, bilateral distribution, and subsegmental vessel enlargement (&gt; 3 mm). Chest CT sensitivity was high (97%) but with lower specificity (56%)