Entrainment, motion and deposition of coarse particles transported by water over a sloping mobile bed

In gravel-bed rivers, bedload transport exhibits considerable variability in time and space. Recently, stochastic bedload transport theories have been developed to address the mechanisms and effects of bedload transport fluctuations. Stochastic models involve parameters such as particle diffusivity, entrainment and deposition rates. The lack of hard information on how these parameters vary with flow conditions is a clear impediment to their application to real-world scenarios. In this paper, we determined the closure equations for the above parameters from laboratory experiments. We focused on shallow supercritical flow on a sloping mobile bed in straight channels, a setting that was representative of flow conditions in mountain rivers. Experiments were run at low sediment transport rates under steady nonuniform flow conditions (i.e., the water discharge was kept constant, but bedforms developed and migrated upstream, making flow nonuniform). Using image processing, we reconstructed particle paths to deduce the particle velocity and its probability distribution, particle diffusivity, and rates of deposition and entrainment. We found that on average, particle acceleration, velocity and deposition rate were responsive to local flow conditions, whereas entrainment rate depended strongly on local bed activity. Particle diffusivity varied linearly with the depth-averaged flow velocity. The empirical probability distribution of particle velocity was well approximated by a Gaussian distribution when all particle positions were considered together. In contrast, the particles located in close vicinity to the bed had exponentially distributed velocities. Our experimental results provide closure equations for stochastic or deterministic bedload transport models.Comment: Submitted to Journal of Geophysical Researc

Are there "dragon-kings” events (i.e. genuine outliers) among extreme avalanches?

Predicting the occurrence and spatial extent of extreme avalanches is a longstanding issue. Using field data pooled from various sites within the same mountain range, authors showed that the avalanche size distribution can be described using either an extreme value distribution or a thick-tailed distribution, which implies that although they are much larger than common avalanches, extreme avalanches belong to the same population of events as "small” avalanches. Yet, when looking at historical records of catastrophic avalanches, archives reveal that a few avalanches had features that made them "extra-ordinary.” Applying avalanche-dynamics or statistical models to simulate these past events runs into considerable difficulty since the model parameters or the statical properties are very different from the values usually set to model extreme avalanches. Were these events genuine outliers (also called "dragon-kings”)? What were their distinctive features? This paper reviews some of the concepts in use to model extreme events, gives examples of processes that were at play in extreme avalanches, and shows that the concept of dragon-king avalanches is of particular relevance to describing some extreme avalanche

Stationary shear flows of dense granular materials : a tentative continuum modelling

We propose a simple continuum model to interpret the shearing motion of dense, dry and cohesion-less granular media. Compressibility, dilatancy and Coulomb-like friction are the three basic ingredients. The granular stress is split into a rate-dependent part representing the rebound-less impacts between grains and a rate-independent part associated with long-lived contacts. Because we consider stationary flows only, the grain compaction and the grain velocity are the two main variables. The predicted velocity and compaction profiles are in apparent agreement with the experimental or numerical results concerning free-surface shear flows as well as confined shear flow

0-level Vacuum Packaging RT Process for MEMS Resonators

A new Room Temperature (RT) 0-level vacuum package is demonstrated in this work, using amorphous silicon (aSi) as sacrificial layer and SiO2 as structural layer. The process is compatible with most of MEMS resonators and Resonant Suspended-Gate MOSFET [1] fabrication processes. This paper presents a study on the influence of releasing hole dimensions on the releasing time and hole clogging. It discusses mass production compatibility in terms of packaging stress during back-end plastic injection process. The packaging is done at room temperature making it fully compatible with IC-processed wafers and avoiding any subsequent degradation of the active devices.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing

The dam-break problem for viscous fluids in the high-capillary-number limit

Experiments were undertaken to investigate dam-break flows where a finite volume of highly viscous fluid (glucose with viscosity μ ≈ 350 Pa s) maintained behind a lock gate was released into a horizontal or inclined flume. The resulting sequence of flow-depth profiles was tracked using a three-dimensional visualization system. In the low-Reynolds-number and high-capillary-number limits, analytical solutions can be obtained from the Navier-Stokes equations using lubrication theory and matched asymptotic expansions. At shallow slopes, similarity solutions can also be worked out. While the variation in the front position scaled with time as predicted by theory for both horizontal and sloping flumes, there was a systematic delay in the front position observed. Moreover, taking a closer look at the experimental flow-depth profiles shows that they were similar, but they noticeably deviated from the theoretical similarity form for horizontal planes. For sloping beds, the flow-depth profile is correctly predicted provided that different scalings are used at shallow and large slope

The dam-break problem for concentrated suspensions of neutrally buoyant particles

This paper addresses the dam-break problem for particle suspensions, that is, the flow of a finite volume of suspension released suddenly down an inclined flume. We were concerned with concentrated suspensions made up of neutrally buoyant non-colloidal particles within a Newtonian fluid. Experiments were conducted over wide ranges of slope, concentration and mass. The major contributions of our experimental study are the simultaneous measurement of local flow properties far from the sidewalls (velocity profile and, with lower accuracy, particle concentration) and macroscopic features (front position, flow depth profile). To that end, the refractive index of the fluid was adapted to closely match that of the particles, enabling data acquisition up to particle volume fractions of 60 %. Particle migration resulted in the blunting of the velocity profile, in contrast to the parabolic profile observed in homogeneous Newtonian fluids. The experimental results were compared with predictions from lubrication theory and particle migration theory. For solids fractions as large as 45 %, the flow behaviour did not differ much from that of a homogeneous Newtonian fluid. More specifically, we observed that the velocity profiles were closely approximated by a parabolic form and there was little evidence of particle migration throughout the depth. For particle concentrations in the 52-56 % range, the flow depth and front position were fairly well predicted by lubrication theory, but taking a closer look at the velocity profiles revealed that particle migration had noticeable effects on the shape of the velocity profile (blunting), but had little impact on its strength, which explained why lubrication theory performed well. Particle migration theories (such as the shear-induced diffusion model) successfully captured the slow evolution of the velocity profiles. For particle concentrations in excess of 56 %, the macroscopic flow features were grossly predicted by lubrication theory (to within 20 % for the flow depth, 50 % for the front position). The flows seemed to reach a steady state, i.e. the shape of the velocity profile showed little time dependenc

Multi-component particle-size segregation in shallow granular avalanches

A general continuum theory for particle-size segregation and diffusive remixing in polydisperse granular avalanches is formulated using mixture theory. Comparisons are drawn to existing segregation theories for bi-disperse mixtures and the case of a ternary mixture of large, medium and small particles is investigated. In this case, the general theory reduces to a system of two coupled parabolic segregation-remixing equations, which have a single diffusion coefficient and three parameters which control the segregation rates between each pair of constituents. Considerable insight into many problems where the effect of diffusive remixing is small is provided by the non-diffusive case. Here the equations reduce to a system of two first-order conservation laws, whose wave speeds are real for a very wide class of segregation parameters. In this regime, the system is guaranteed to be non-strictly hyperbolic for all admissible concentrations. If the segregation rates do not increase monotonically with the grain-size ratio, it is possible to enter another region of parameter space, where the equations may either be hyperbolic or elliptic, depending on the segregation rates and the local particle concentrations. Even if the solution is initially hyperbolic everywhere, regions of ellipticity may develop during the evolution of the problem. Such regions in a time-dependent problem necessarily lead to short wavelength Hadamard instability and ill-posedness. A linear stability analysis is used to show that the diffusive remixing terms are sufficient to regularize the theory and prevent unbounded growth rates at high wave numbers. Numerical solutions for the time-dependent segregation of an initially almost homogeneously mixed state are performed using a standard Galerkin finite element method. The diffuse solutions may be linearly stable or unstable, depending on the initial concentrations. In the linearly unstable region, ‘sawtooth' concentration stripes form that trap and focus the medium-sized grains. The large and small particles still percolate through the avalanche and separate out at the surface and base of the flow due to the no-flux boundary conditions. As these regions grow, the unstable striped region is annihilated. The theory is used to investigate inverse distribution grading and reverse coarse-tail grading in multi-component mixtures. These terms are commonly used by geologists to describe particle-size distributions in which either the whole grain-size population coarsens upwards, or just the coarsest clasts are inversely graded and a fine-grained matrix is found everywhere. An exact solution is constructed for the steady segregation of a ternary mixture as it flows down an inclined slope from an initially homogeneously mixed inflow. It shows that for distribution grading, the particles segregate out into three inversely graded sharply segregated layers sufficiently far downstream, with the largest particles on top, the fines at the bottom and the medium-sized grains sandwiched in between. The heights of the layers are strongly influenced by the downstream velocity profile, with layers becoming thinner in the faster moving near-surface regions of the avalanche, and thicker in the slowly moving basal layers, for the same mass flux. Conditions for the existence of the solution are discussed and a simple and useful upper bound is derived for the distance at which all the particles completely segregate. When the effects of diffusive remixing are included, the sharp concentration discontinuities are smoothed out, but the simple shock solutions capture many features of the evolving size distribution for typical diffusive remixing rates. The theory is also used to construct a simple model for reverse coarse-tail grading, in which the fine-grained material does not segregate. The numerical method is used to calculate diffuse solutions for a ternary mixture and a sharply segregated shock solution is derived that looks similar to the segregation of a bi-disperse mixture of large and medium grains. The presence of the fine-grained material, however, prevents high concentrations of large or medium particles being achieved and there is a significant lengthening of the segregation distanc

Segregation, recirculation and deposition of coarse particles near two-dimensional avalanche fronts

Stratification patterns are formed when a bidisperse mixture of large rough grains and smaller more mobile particles is poured between parallel plates to form a heap. At low flow rates discrete avalanches flow down the free surface and are brought to rest by the propagation of shock waves. Experiments performed in this paper show that the larger particles are segregated to the top of the avalanche, where the velocity is greatest, and are transported to the flow front. Here the particles are overrun but may rise to the free surface again by size segregation to create a recirculating coarse-grained front. Once the front is established composite images show that there is a steady regime in which any additional large grains that reach the front are deposited. This flow is therefore analogous to finger formation in geophysical mass flows, where the larger less mobile particles are shouldered aside to spontaneously form static lateral levees rather than being removed by basal deposition in two dimensions. At the heart of all these phenomena is a dynamic feedback between the bulk flow and the evolving particle-size distribution within the avalanche. A fully coupled theory for such segregation-mobility feedback effects is beyond the scope of this paper. However, it is shown how to derive a simplified uncoupled travelling-wave solution for the avalanche motion and reconstruct the bulk two-dimensional flow field using assumed velocity profiles through the avalanche depth. This allows a simple hyperbolic segregation theory to be used to construct exact solutions for the particle concentration and for the recirculation within the bulk flow. Depending on the material composition and the strength of the segregation and deposition, there are three types of solution. The coarse-particle front grows in length if more large particles arrive than can be deposited. If there are fewer large grains and if the segregation is strong enough, a breaking size-segregation wave forms at a unique position behind the front. It consists of two expansion fans, two shocks and a central ‘eye' of constant concentration that are arranged in a ‘lens-like' structure. Coarse grains just behind the front are recirculated, while those reaching the head are overrun and deposited. Upstream of the wave, the size distribution resembles a small-particle ‘sandwich' with a raft of rapidly flowing large particles on top and a coarse deposited layer at the bottom, consistent with the experimental observations made here. If the segregation is weak, the central eye degenerates, and all the large particles are deposited without recirculatio

Patients' expectations of physiotherapists before and after an intensive chronic low back pain rehabilitation programme: a qualitative study based on semi-structured interviews and observations.

To investigate the expectations regarding physiotherapists of patients attending an interdisciplinary CLBP rehabilitation programme and the response to these expectations. A thematic analysis was conducted, based on interviews of working-age patients with CLBP and without significant comorbidities. Twenty patients participated (9 male, 11 female, aged 21-58 years; symptoms duration 4.3 ± 3.0 years; pain VAS 53 ± 21 mm). Patients expected to learn pain and activity management. Expected outcomes were a reduction of pain, increased well-being and a return to normality. A collaborative approach involving therapeutic and relational adaptation was expected. Despite divergences concerning emotional aspects, patients expected a large range of applied psychosocial skills.The programme met the expectations of most patients, especially when its goals matched those reported by the individuals. For most participants, the pain relief was below expectations. Active therapies were valued. After the programme, patients felt more ready to take responsibility for their back. The expectation of developing self-management skills was prevalent. Expected treatments were mostly compatible with recommendations. Expectations to resume activities and decrease pain were in line with the rehabilitation goals, although the expected reduction in pain was overestimated. Relational expectations converged towards patient-centred care