Photoresponsive and Polarization-Sensitive Structural Colors from Cellulose/Liquid Crystal Nanophotonic Structures

Cellulose nanocrystals (CNCs) possess the ability to form helical periodic structures that generate structural colors. Due to the helicity, such self-assembled cellulose structures preferentially reflect left-handed circularly polarized light of certain colors, while they remain transparent to right-handed circularly polarized light. This study shows that combination with a liquid crystal enables modulation of the optical response to obtain light reflection of both handedness but with reversed spectral profiles. As a result, the nanophotonic systems provide vibrant structural colors that are tunable via the incident light polarization. The results are attributed to the liquid crystal aligning on the CNC/glucose film, to form a birefringent layer that twists the incident light polarization before interaction with the chiral cellulose nanocomposite. Using a photoresponsive liquid crystal, this effect can further be turned off by exposure to UV light, which switches the nematic liquid crystal into a nonbirefringent isotropic phase. The study highlights the potential of hybrid cellulose systems to create self-assembled yet advanced photoresponsive and polarization-tunable nanophotonics.Funding Agencies|Stiftelsen Olle Engkvist ByggmastareSwedish Research Council [194-0679]; Wenner-Gren Foundations; Swedish Foundation for Strategic ResearchSwedish Foundation for Strategic Research; Knut and Alice Wallenberg foundationKnut &amp; Alice Wallenberg Foundation; Linkoping University; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]; Wallenberg Wood Science Center</p

Superamphiphobic coatings based on liquid-core microcapsules with engineered capsule walls and functionality

Microcapsules with specific functional properties, related to the capsule wall and core, are highly desired in a number of applications. In this study, hybrid cellulose microcapsules (1.2 ± 0.4 μm in diameter) were prepared by nanoengineering the outer walls of precursor capsules. Depending on the preparation route, capsules with different surface roughness (raspberry or broccoli-like), and thereby different wetting properties, could be obtained. The tunable surface roughness was achieved as a result of the chemical and structural properties of the outer wall of a precursor capsule, which combined with a new processing route allowed in-situ formation of silica nanoparticles (30-40 nm or 70 nm in diameter). By coating glass slides with "broccoli-like" microcapsules (30-40 nm silica nanoparticles), static contact angles above 150° and roll-off angles below 6° were obtained for both water and low surface-tension oil (hexadecane), rendering the substrate superamphiphobic. As a comparison, coatings from raspberry-like capsules were only strongly oleophobic and hydrophobic. The liquid-core of the capsules opens great opportunities to incorporate different functionalities and here hydrophobic superparamagnetic nanoparticles (SPIONs) were encapsulated. As a result, magnetic broccoli-like microcapsules formed an excellent superamphiphobic coating-layer on a curved geometry by simply applying an external magnetic field

Hierarchical build-up of bio-based nanofibrous materials with tunable metal–organic framework biofunctionality

Multifunctional, light-weight, responsive materials show promise in a range of applications including soft robotics, therapeutic delivery, advanced diagnostics and charge storage. This paper presents a novel, scalable, efficient and sustainable approach for the preparation of cellulose nanofibril-based aerogels via a facile ice-templating, solvent exchange and air-drying procedure, which could replace existing inefficient drying processes. These ambient-dried aerogels (∼99% porosity) exhibit a high specific compressive modulus (26.8 ± 6.1 kPa m3 kg−1, approaching equivalence of carbon-nanotube-reinforced aerogels), wet stability and shape recovery (80–90%), favorable specific surface area (90 m2 g−1) and tunable densities (2–20 kg m−3). The aerogels provide an ideal nanofibrillar substrate for in-situ growth of metal–organic frameworks (MOFs), via co-assembly of MOF precursors with proteins in aqueous solutions. The resulting hybrid aerogels show a nine-fold increase in surface area (810 m2g−1), with preserved wet stability and additional protein biofunctionality. The hybrid aerogels facilitate a pH-controlled release of immobilized proteins, following a concomitant disassembly of the surface grown MOFs, demonstrating their use in controlled delivery systems. The colorimetric protein binding assay of the biofunctionalized hybrid aerogel also demonstrates the potential of the material as a novel 3D bioassay platform, which could potentially be an alternative to plate-based enzyme-linked immunosorbent assay

Pattern Shape Control for Heat Treatment Purification of Electron-Beam-Induced Deposition of Gold from the Me₂Au(acac) Precursor

Gold structures can be created in a scanning electron microscope (SEM) from the Me₂Au­(acac) precursor by direct writing with the electron beam. The as-deposited purity is usually poor, and a common purification approach is a post-annealing step that indeed is effective but also induces a volume reduction because of carbon loss and an undesirable reconfiguration of the gold structure, resulting in the loss of the original shape. We studied the shape change as a result of such purification, and to minimize this effect, the application of a tantalum and chromium buffer layer was investigated. These buffer materials are well-known for their good adhesion properties. We confirm by dedicated SEM, atomic force microscopy (AFM), and transmission electron microscopy (TEM) analysis that, for the creation of a uniform Au structure, tantalum is a better buffer layer material than chromium. Post-annealing of the Au electron-beam-induced deposition (EBID) patterns for 1 h at 600 °C in air resulted in a dramatic purity increase (from 8–12 atomic % Au to above 92 atomic % Au). The uncovered part of the tantalum layer can be easily etched away, resulting in a well-defined, high-purity, gold structure

Bioinspired Layer-by-Layer Microcapsules Based on Cellulose Nanofibers with Switchable Permeability

Green, all-polysaccharide based microcapsules with mechanically robust capsule walls and fast, stimuli-triggered, and switchable permeability behavior show great promise in applications based on selective and timed permeability. Taking a cue from nature, the build-up and composition of plant primary cell walls inspired the capsule wall assembly, because the primary cell walls in plants exhibit high mechanical properties despite being in a highly hydrated state, primarily owing to cellulose microfibrils. The microcapsules (16 ± 4 μm in diameter) were fabricated using the layer-by-layer technique on sacrificial CaCO₃ templates, using plant polysaccharides (pectin, cellulose nanofibers, and xyloglucan) only. In water, the capsule wall was permeable to labeled dextrans with a hydrodynamic diameter of ∼6.6 nm. Upon exposure to NaCl, the porosity of the capsule wall quickly changed allowing larger molecules (∼12 nm) to permeate. However, the porosity could be restored to its original state by removal of NaCl, by which permeants became trapped inside the capsule’s core. The high integrity of cell wall was due to the CNF and the ON/OFF alteration of the permeability properties, and subsequent loading/unloading of molecules, could be repeated several times with the same capsule demonstrating a robust microcontainer with controllable permeability properties

Modification of cellulose through physisorption of cationic bio-based nanolatexes – comparing emulsion polymerization and RAFT-mediated polymerization-induced self-assembly

The polymerization of a bio-based terpene-derived monomer, sobrerol methacrylate (SobMA), was evaluated in the design of polymeric nanoparticles (nanolatexes). Their synthesis was accomplished by using emulsion polymerization, either by free-radical polymerization in the presence of a cationic surfactant or a cationic macroRAFT agent by employing RAFT-mediated polymerization-induced self-assembly (PISA). By tuning the length of the hydrophobic polymer, it was possible to control the nanoparticle size between 70 and 110 nm. The average size of the latexes in both wet and dry state were investigated by microscopy imaging and dynamic light scattering (DLS). Additionally, SobMA was successfully copolymerized with butyl methacrylate (BMA) targeting soft-core nanolatexes. The comparison of the kinetic profile of the cationically stabilized nanolatexes highlighted the differences of both processes. The SobMA-based nanolatexes yielded high Tg ∼ 120 °C, while the copolymer sample exhibited a lower Tg ∼ 50 °C, as assessed by Differential Scanning Calorimetry (DSC). Thereafter, the nanolatexes were adsorbed onto cellulose (filter paper), where they were annealed at elevated temperatures to result in polymeric coatings. Their morphologies were analysed by Field Emission Scanning Electron Microscopy (FE-SEM) and compared to a commercial sulfate polystyrene latex (PS latex). By microscopic investigation the film formation mechanism could be unravelled. Water contact angle (CA) measurements verified the transition from a hydrophilic to a hydrophobic surface after film formation had occured. The obtained results are promising for the toolbox of bio–based building blocks, focused on sobrerol-based monomers, to be used in emulsion polymerizations either for tailored PISA–latexes or facile conventional latex formation, in order to replace methyl methacrylate or other high Tg-monomers