Quantum Computation with Ballistic Electrons

We describe a solid state implementation of a quantum computer using ballistic single electrons as flying qubits in 1D nanowires. We show how to implement all the steps required for universal quantum computation: preparation of the initial state, measurement of the final state and a universal set of quantum gates. An important advantage of this model is the fact that we do not need ultrafast optoelectronics for gate operations. We use cold programming (or pre-programming), i.e., the gates are set before launching the electrons; all programming can be done using static electric fields only.Comment: 5 pages, RevTeX4, 5 figures, uses epsf, latexsym, time

Crystalline Silicon Heterojunction Solar Cell With 81.6% Fill Factor, Deposited by Physical Vapour Deposition Methods Only.

It is shown here that silicon (Si) based solar cells can be deposited by physical vapour deposition (PVD) methods only. These cells are called the PVD-Si cells. Their processing eliminates the deposition methods involving high temperature processing steps, and / or expensive, toxic and flammable gases used for processing conventional solar cells with Si absorbers. The PVD-Si cell design investigated has the structure of ITO | MoOx | c-Si | LiF | Al. When this cell is deposited on an untextured crystalline (c-Si) wafer, it has a fill factor value of 81.6% under the standard test conditions (STC). In order to improve the amount of short-circuit current density (Jsc) generated, this cell is also demonstrated on a textured c-Si wafer, achieving Jsc of 35.94 mA/cm2 under STC

Interval State Estimation in Active Distribution Systems Considering Multiple Uncertainties.

Distribution system state estimation (DSSE) plays a significant role for the system operation management and control. Due to the multiple uncertainties caused by the non-Gaussian measurement noise, inaccurate line parameters, stochastic power outputs of distributed generations (DG), and plug-in electric vehicles (EV) in distribution systems, the existing interval state estimation (ISE) approaches for DSSE provide fairly conservative estimation results. In this paper, a new ISE model is proposed for distribution systems where the multiple uncertainties mentioned above are well considered and accurately established. Moreover, a modified Krawczyk-operator (MKO) in conjunction with interval constraint-propagation (ICP) algorithm is proposed to solve the ISE problem and efficiently provides better estimation results with less conservativeness. Simulation results carried out on the IEEE 33-bus, 69-bus, and 123-bus distribution systems show that the our proposed algorithm can provide tighter upper and lower bounds of state estimation results than the existing approaches such as the ICP, Krawczyk-Moore ICP(KM-ICP), Hansen, and MKO

Device and circuit-level performance of carbon nanotube field-effect transistor with benchmarking against a nano-MOSFET.

The performance of a semiconducting carbon nanotube (CNT) is assessed and tabulated for parameters against those of a metal-oxide-semiconductor field-effect transistor (MOSFET). Both CNT and MOSFET models considered agree well with the trends in the available experimental data. The results obtained show that nanotubes can significantly reduce the drain-induced barrier lowering effect and subthreshold swing in silicon channel replacement while sustaining smaller channel area at higher current density. Performance metrics of both devices such as current drive strength, current on-off ratio (Ion/Ioff), energy-delay product, and power-delay product for logic gates, namely NAND and NOR, are presented. Design rules used for carbon nanotube field-effect transistors (CNTFETs) are compatible with the 45-nm MOSFET technology. The parasitics associated with interconnects are also incorporated in the model. Interconnects can affect the propagation delay in a CNTFET. Smaller length interconnects result in higher cutoff frequency.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are

Understanding Capacitance Variation in Sub-nanometer Pores by in Situ Tuning of Interlayer Constrictions.

The contribution of subnanometer pores in carbon electrodes to the charge-storage mechanism in supercapacitors has been the subject of intense debate for over a decade. Here, we provide a model system based on graphene oxide, which employs interlayer constrictions as a model for pore sizes that can be both controllably tuned and studied in situ during supercapacitor device use. Correlating electrochemical performance and in situ tuning of interlayer constrictions, we observe a peak in specific capacitance when interlayer constriction size reaches the diameters of unsolvated ions, supporting the hypothesized link between loss of ion solvation shell and anomalous capacitance increase for subnanometer pores.DTLG acknowledges technical support by J. N. R. Grundy (University of Cambridge) and financial support from Newnham College, Cambridge and the Cambridge Commonwealth Trust. GAJA acknowledges partial support for this work from Dyson Ltd. BCB acknowledges a College Research Fellowship at Hughes Hall, Cambridge. DTLG and GAJA thank Ananda Hettiarachchy and K. M. N. de Silva for discussions on activated carbon.This is the author accepted manuscript. The final version is available from the American Chemical Society via http://dx.doi.org/10.1021/acsnano.5b0581

Tailoring Carbon Nanostructure for High Frequency Supercapacitor Operation

The possibility of enhancing the frequency performance of electrochemical capacitors by tailoring the nanostructure of the carbon electrode to increase electrolyte permeability is demonstrated. Highly porous, vertically oriented carbon electrodes which are in direct electrical contact with the metallic current collector are produced via MPECVD growth on metal foils. The resulting structure has a capacitance and frequency performance between that of an electrolytic capacitor and an electrochemical capacitor. Fully packaged devices are produced on Ni and Cu current collectors and performance compared to state-of-the-art electrochemical capacitors and electrolytic capacitors. The extension of capacitive behavior to the AC regime (~100 Hz) opens up an avenue for a number of new applications where physical volume of the capacitor may be significantly reduced

Devitrite-based optical diffusers.

Devitrite is a novel material produced by heat treatment of commercial soda-lime-silica glass. It consists of fans of needle-like crystals which can extend up to several millimeters and have interspacings of up to a few hundred nanometers. To date, only the material properties of devitrite have been reported, and there has been a distinct lack of research on using it for optical applications. In this study, we demonstrate that randomly oriented fans of devitrite crystals can act as highly efficient diffusers for visible light. Devitrite crystals produce phase modulation of light because of their relatively high anisotropy. The nanoscale spacings between these needles enable light to be diffused to large scattering angles. Experimentally measured results suggest that light diffusion patterns with beam widths of up to 120° are produced. Since devitrite is an inexpensive material to produce, it has the potential to be used in a variety of commercial applications.HB would like to thank The Leverhulme Trust and Cambridge Philosophical Society for research funding.This is the author accepted manuscript. The final version can be found on the publisher's website at: http://pubs.acs.org/doi/abs/10.1021/nn500155e Copyright © 2014 American Chemical Societ

Indoor photovoltaics, the next big trend in solution-processed solar cells

Indoor photovoltaics (IPVs) have attracted considerable interest for their potential to power small and portable electronics and photonic devices. The recent advancemes in circuit design and device optimizations has led to the power required to operate electronics for the internet of things (IoT), such as distributed sensors, remote actuators, and communication devices, being remarkably reduced. Therefore, various types of sensors and a large number of nodes can be wireless or even batteryless powered by IPVs. In this review, we provide a comprehensive overview of the recent developments in IPVs. We primarily focus on third‐generation solution‐processed solar cell technologies, which include organic solar cells, dye‐sensitized solar cells, perovskite solar cells, and newly developed colloidal quantum dot indoor solar cells. Besides, the device design principles are also discussed in relation to the unique characteristics of indoor lighting conditions. Challenges and prospects for the development of IPV are also summarized, which, hopefully, can lead to a better understanding of future IPV design as well as performance enhancement