795 research outputs found
Effects of planform geometry on hover performance of a 2-meter-diameter model of a four-bladed rotor
Hover tests were conducted on three small scale rotors to evaluate the effects of blade planform taper on rotor hover performance. Tests were conducted on a rectangular swept-tip configuration, on a configuration with a 3 to 1 taper over the outboard 20 percent of the span, and on a configuration with a 5 to 1 taper over the outboard 20 percent of the blade span. The investigation covered a range of thrust coefficients from 0 to 0.0075 and a range of tip speeds from 300 to 600 ft/sec. The tests showed that both tapered configurations had better hover performance than the swept-tip rectangular configuration and that the 3 to 1 taper configuration was better than the 5 to 1 taper configuration. The test results were compared with predictions made with a prescribed wake analysis, a momentum analysis, and a simplified free wake analysis
An SU(3) model for octet baryon and meson fragmentation
The production of the octet of baryons and mesons in e^+ e^- collisions is
analysed, based on considerations of SU(3) symmetry and a simple model for
SU(3) symmetry breaking in fragmentation functions. All fragmentation
functions, D_q^h(x, Q^2), describing the fragmentation of quarks into a member
of the baryon octet (and similarly for fragmentation into members of the meson
octet) are expressed in terms of three SU(3) symmetric functions, \alpha(x,
Q^2), \beta(x, Q^2), and \gamma(x, Q^2). With the introduction of an SU(3)
breaking parameter, \lambda, the model is successful in describing
hadroproduction data at the Z pole. The fragmentation functions are then
evolved using leading order evolution equations and good fits to currently
available data at 34 GeV and at 161 GeV are obtained.Comment: 24 pages LaTeX file including 11 postscript figure file
Testing QCD with Hypothetical Tau Leptons
We construct new tests of perturbative QCD by considering a hypothetical tau
lepton of arbitrary mass, which decays hadronically through the electromagnetic
current. We can explicitly compute its hadronic width ratio directly as an
integral over the e^+ e^- annihilation cross section ratio, R_{e^+e^-}.
Furthermore, we can design a set of commensurate scale relations and
perturbative QCD tests by varying the weight function away from the form
associated with the V-A decay of the physical tau. This method allows the wide
range of the R_{e^+e^-} data to be used as a probe of perturbative QCD.Comment: 4 pages, 4 figure
An Investigation of Hadronization Mechanism at Factory
We briefly review the hadronization pictures adopted in the LUND String
Fragmentation Model(LSFM), Webber Cluster Fragmentation Model(WCFM) and Quark
Combination Model(QCM), respectively. Predictions of hadron multiplicity,
baryon to meson ratios and baryon-antibaryon flavor correlations, especially
related to heavy hadrons at factory obtained by LSFM and QCM are
reported.Comment: 18 pages, 6 figures. accepted by Sci China Phys Mech Astro
Statistical approach for unpolarized fragmentation functions for the octet baryons
A statistical model for the parton distributions in the nucleon has proven
its efficiency in the analysis of deep inelastic scattering data, so we propose
to extend this approach to the description of unpolarized fragmentation
functions for the octet baryons. The characteristics of the model are
determined by using some data on the inclusive production of proton and
in unpolarized deep inelastic scattering and a next-to-leading
analysis of the available experimental data on the production of unpolarized
octet baryons in annihilation. Our results show that both parton
distributions and fragmentation functions are compatible with the statistical
approach, in terms of a few free parameters, whose interpretation will be
discussed.Comment: 14 pages, 7 eps figures, to appear in Phys. Rev.
First-principles calculation of the thermal properties of silver
The thermal properties of silver are calculated within the quasi-harmonic
approximation, by using phonon dispersions from density-functional perturbation
theory, and the pseudopotential plane-wave method. The resulting free energy
provides predictions for the temperature dependence of various quantities such
as the equilibrium lattice parameter, the bulk modulus, and the heat capacity.
Our results for the thermal properties are in good agreement with available
experimental data in a wide range of temperatures. As a by-product, we
calculate phonon frequency and Grueneisen parameter dispersion curves which are
also in good agreement with experiment.Comment: 9 pages, 8 figures, submitted to Phys. Rev. B April 30, 1998). Other
related publications can be found at
http://www.rz-berlin.mpg.de/th/paper.htm
Inducing safer oblique trees without costs
Decision tree induction has been widely studied and applied. In safety applications, such as determining whether a chemical process is safe or whether a person has a medical condition, the cost of misclassification in one of the classes is significantly higher than in the other class. Several authors have tackled this problem by developing cost-sensitive decision tree learning algorithms or have suggested ways of changing the
distribution of training examples to bias the decision tree learning process so as to take account of costs. A prerequisite for applying such algorithms is the availability of costs of misclassification.
Although this may be possible for some applications, obtaining reasonable estimates of costs of misclassification is not easy in the area of safety.
This paper presents a new algorithm for applications where the cost of misclassifications cannot be quantified, although the cost of misclassification in one class is known to be significantly higher than in another class. The algorithm utilizes linear discriminant analysis to identify oblique relationships between continuous attributes and then carries out an appropriate modification to ensure that the resulting tree errs on the side of safety. The algorithm is evaluated with respect to one of the best known cost-sensitive algorithms (ICET), a well-known oblique decision tree algorithm (OC1) and an algorithm that utilizes robust linear programming
The Effect of Lattice Vibrations on Substitutional Alloy Thermodynamics
A longstanding limitation of first-principles calculations of substitutional
alloy phase diagrams is the difficulty to account for lattice vibrations. A
survey of the theoretical and experimental literature seeking to quantify the
impact of lattice vibrations on phase stability indicates that this effect can
be substantial. Typical vibrational entropy differences between phases are of
the order of 0.1 to 0.2 k_B/atom, which is comparable to the typical values of
configurational entropy differences in binary alloys (at most 0.693 k_B/atom).
This paper describes the basic formalism underlying ab initio phase diagram
calculations, along with the generalization required to account for lattice
vibrations. We overview the various techniques allowing the theoretical
calculation and the experimental determination of phonon dispersion curves and
related thermodynamic quantities, such as vibrational entropy or free energy. A
clear picture of the origin of vibrational entropy differences between phases
in an alloy system is presented that goes beyond the traditional bond counting
and volume change arguments. Vibrational entropy change can be attributed to
the changes in chemical bond stiffness associated with the changes in bond
length that take place during a phase transformation. This so-called ``bond
stiffness vs. bond length'' interpretation both summarizes the key phenomenon
driving vibrational entropy changes and provides a practical tool to model
them.Comment: Submitted to Reviews of Modern Physics 44 pages, 6 figure
The quest for companions to post-common envelope binaries: I. Searching a sample of stars from the CSS and SDSS
As part of an ongoing collaboration between student groups at high schools
and professional astronomers, we have searched for the presence of
circum-binary planets in a bona-fide unbiased sample of twelve post-common
envelope binaries (PCEBs) from the Catalina Sky Survey (CSS) and the Sloan
Digital Sky Survey (SDSS). Although the present ephemerides are significantly
more accurate than previous ones, we find no clear evidence for orbital period
variations between 2005 and 2011 or during the 2011 observing season. The
sparse long-term coverage still permits O-C variations with a period of years
and an amplitude of tens of seconds, as found in other systems. Our
observations provide the basis for future inferences about the frequency with
which planet-sized or brown-dwarf companions have either formed in these
evolved systems or survived the common envelope (CE) phase.Comment: accepted by A&
Simultaneous genetic ablation of PD-1, LAG-3, and TIM-3 in CD8 T cells delays tumor growth and improves survival outcome
Immune checkpoint inhibitors (ICI) represented a step forward in improving the outcome of patients with various refractory solid tumors and several therapeutic regimens incorporating ICI have already been approved for a variety of tumor entities. However, besides remarkable long-term responses, checkpoint inhibition can trigger severe immune-related adverse events in some patients. In order to improve safety of ICI as well as T cell therapy, we tested the feasibility of combining T cell-based immunotherapy with genetic disruption of checkpoint molecule expression. Therefore, we generated H-Y and ovalbumin antigen-specific CD8(+) T cells with abolished PD-1, LAG-3, and TIM-3 expression through CRISPR/Cas9 technology. CD8(+) T cells, subjected to PD-1, LAG-3, and TIM-3 genetic editing, showed a strong reduction in immune checkpoint molecule expression after in vitro activation, while no relevant reduction in responsiveness to in vitro stimulation was observed. At the same time, in B16-OVA tumor model, transferred genetically edited OT-1 CD8(+) T cells promoted longer survival compared to control T cells and showed enhanced expansion without associated toxicity. Our study supports the notion that antigen-specific adoptive T cell therapy with concomitant genetic disruption of multiple checkpoint inhibitory receptors could represent an effective antitumor immunotherapy approach with improved tolerability profile
- …