Printed Dot Quality in Response to Doctor Blade Angle in Gravure Printing

Doctor blade is one of the critical machine part of the gravure printing press that controls the amount of ink transfer on the substrate. The angle of the blade can be varied; however, an improper angle may cause major problems. In this study, the doctor blade angle was positioned at three different level to address its effect on the printed dot quality. Print trials were made on a web-fed gravure press at the speed of 650 ft./min. A high-resolution overhead camera was used to analyze the key dot attributes. The results showed that measuring only the density of printed dot –a traditional quality control method– is insufficient. Incorporating the camera was assisted capturing missing dots, as well as quantifying dot area, perimeter and circularity. Print trials showed that the image quality was undesirable, when the blade angle exceeded or fell behind the optimum position

The binomial sequence spaces of nonabsolute type

Abstract In this paper, we introduce the binomial sequence spaces b 0 r , s $b^{r,s}_{0}$ and b c r , s $b^{r,s}_{c}$ of nonabsolute type which include the spaces c 0 $c_{0}$ and c, respectively. Also, we prove that the spaces b 0 r , s $b^{r,s}_{0}$ and b c r , s $b^{r,s}_{c}$ are linearly isomorphic to the spaces c 0 $c_{0}$ and c, in turn, and we investigate some inclusion relations. Moreover, we obtain the Schauder bases of those spaces and determine their α-, β-, and γ-duals. Finally, we characterize some matrix classes related to those spaces

The effect of green biobased binder on structural, mechanical, liquid absorption and wetting properties of coated papers

Synthetic styrene-butadiene (SB) and styrene-acrylic (SA) latex binders used in paper coating formulations are common and based on unsustainable petroleum sources. Today\u27s papermaking industry turns towards sustainable substitutes that do not compromise quality, and reduce carbon emission, toxic substance release and waste disposal concerns related to fossil fuel sources. In this study, colloidal starch-based latex nanoparticles that do not require cooking were used for pigment coating and coated on the paper surfaces. The effects of these new biobased binders on the structural and mechanical strength properties, liquid absorption, wetting and surface topography of the paper were investigated and compared with the properties of coated paper that SB latex was used as a coating binder. The results demonstrated that the biobased latex decreases the grammage of paper while maintaining an identical thickness relative to the SB latex samples. The porosity, permeability and roughness of biobased latex are found higher than the SB latex. The biobased latex successfully replaced SB latex at 1:1 ratio and enabled an equivalent of bursting, tear, tensile strength and structural properties

Controlling unequal surface energy results caused by test liquids: the case of UV/O3 Treated PET

Ultraviolet/ozone (UV/O3) treatment has been reported to be an effective method to modify properties such as wettability, adhesion or adsorption of plastic surfaces. The change in the surface is measured by contact angle analysis, which employs liquids and their surface tensions (ST) to estimate the surface energy (SE). We found two different practices in the scientific community: (1) the majority of researchers adopted the ST value of liquids from the literature, while (2) other researchers conducted real-time measurements in the lab under ambient conditions prior to SE estimation. To the best of our knowledge, there is no study that compares the difference between the two practices. One study was found to show different SE methods generating unequal SE values for the same substrate. However, there was no definitive conclusion backed by general thermodynamics rules. In this study, we presented (1) a statistical significance test that showed the literature and experimental ST values are significantly different, and studied (2) the effect of different liquid pairs on the SE estimation for UV/O3 treated poly(ethylene terephthalate) (PET) substrate. Modification techniques such as atmospheric pressure plasma or chemical modification were studied previously to examine PET’s wettability and the SE. The UV/O3 treatment was studied to improve adhesion and to modify its chemical properties for adsorption. In contrast, we studied (3) the effect of UV/O3 on wettability at different timeframes and addressed (4) how to control unequal SE based on a method that was refined on a rigorous thermodynamic three-phase system. It must be noted that this method can be generalized to other types of solid surfaces to estimate thermodynamically self-consistent SE values. This work also provides (5) a web-based calculator that complements computational findings available to the readership in the data availability section

Agility and Resilience as antecedents of Supply Chain Performance under moderating effects of Organizational Culture within Humanitarian Setting: A Dynamic Capability View

Full text embargoed until 18.12.2029 (publisher's embargo period, 12 months

Understanding employee turnover in humanitarian organizations

24 month

Reverse Engineering Gene Networks with ANN: Variability in Network Inference Algorithms

Motivation :Reconstructing the topology of a gene regulatory network is one of the key tasks in systems biology. Despite of the wide variety of proposed methods, very little work has been dedicated to the assessment of their stability properties. Here we present a methodical comparison of the performance of a novel method (RegnANN) for gene network inference based on multilayer perceptrons with three reference algorithms (ARACNE, CLR, KELLER), focussing our analysis on the prediction variability induced by both the network intrinsic structure and the available data. Results: The extensive evaluation on both synthetic data and a selection of gene modules of "Escherichia coli" indicates that all the algorithms suffer of instability and variability issues with regards to the reconstruction of the topology of the network. This instability makes objectively very hard the task of establishing which method performs best. Nevertheless, RegnANN shows MCC scores that compare very favorably with all the other inference methods tested. Availability: The software for the RegnANN inference algorithm is distributed under GPL3 and it is available at the corresponding author home page (http://mpba.fbk.eu/grimaldi/regnann-supmat