Assessment of Copper Pollution in the Surface Layer of Vineyard Soils in Malayer, Iran

Background and Aims: Soil contamination by copper (Cu) very often occurs in the soil surface layer of vineyard cultivations, due to the heavy use of copper fungicides in order to protect against fungal grape diseases. The objective of this study was therefore to evaluate copper concentration in the superficial layer of vineyard cultivation in Malayer, Iran, and also to prepare the pollution map of copper in this region.Materials and Methods: Twenty five surface soil samples (0-20 cm) of Malayer vineyard region were collected and consequently were subjected to Cu concentration assessment. Soil samples were air dried and sieved, and the categorized <0.149 mm fraction was used in subsequent digestion operation. The concentrations of Cu in extracted solutions were determined by Flame Atomic Absorption Spectrophotometry. The inverse distanceweighting (IDW) method was used to interpolate copper concentrations in the whole study area owing to the limited amount of data.Results: The low concentrations of copper in the range of 3.95 to 15.09 mg/kg with a mean value of 7.36 mg/kg were noticed in the studied vineyard soils. The total Cu concentrations were generally similar to those reported for natural soils.Conclusion: Observed low concentrations of copper in studied vineyard cultivations and indeed homogeneous distribution of copper in the soil, implies that the copper concentrations were controlled by geological processes. Heterogeneous distribution of Cu in the small part of southern region could be linked with anthropogenic impacts.Key words: Copper, Malayer, Vineyard soil

Frequency of Intestinal Parasitic Infections among Individuals Referred to the Medical Center Laboratories in Nahavand City, Hamadan Province, Western Iran

Background: Intestinal parasitic infections (IPIs) cause serious public health problem in the world, especially those located in tropical and subtropical areas. This study was conducted with the aim of obtaining frequency of intestinal parasites in referred people to the Nahavand city laboratories, Hamadan province, western Iran.Materials and Methods: A comparative cross-sectional study was conducted among checkup individuals and patients referred to laboratories of Nahavand County. A total of 371 stool samples (150 from checkup individuals and 221 from patients) were selected by using systematic random sampling during summer 2014.  The stool specimens were examined macroscopically, and microscopically by using direct slide smear (saline wet mount and lugol staining), formaldehyde - diethyl ether concentration, trichrome staining and modified Ziehl-Neelsen staining techniques. The results were analyzed using SPSS version 16 and Chi-square test.Results: Ninety two patients (24.8%) were infected with single or multiple intestinal parasites. The overall prevalence of IPIs in checkup individuals and patients was 21.3% and 27.1%, respectively. The frequency of the observed intestinal parasites was: Blastocystis spp. 72 (19.4%), Entamoeba coli 7 (1/9%), Endolimax nana 7 (1/9%), Giardia lamblia 5 (1/3%), Cryptosporidium spp. 3 (0.8%), Entamoeba hartmanni 3 (0.8%), Entamoeba histolitica/E. dispar 1 (0.3%), Trichomonas hominies 1 (0.3%), Chilomastix mesnili 1 (0.3%), Iodamoeba butschlii 1 (0.3% ) and Enterobius vermicularis egg l (0.3%).Conclusion: The proportion of observed protozoan parasites 91 (24.5%) is higher than helminthes infection 1 (0.3%). The worm infections in Nahavand city was dramatically decreased over the past decades, induced increases in public health at the community level.  Blastocystis spp. was the predominant intestinal parasite in people referred to the Nahavand city laboratories.  Proportion of pathogenic IPIs among patients 4.07% (9 of 221) was higher in compare to the checkup individuals in which only one out of 150 (0.66%) Giardia lamblia was observed.

Comparison of Sampling Methods Used to Evaluate Forest Soil Bulk Density

The objective of this study was to compare forest soil bulk density values obtained through conventional sampling methods such as the volumetric ring (VR: diameter 5 cm, length 10 cm) and paraffin sealed clod (PSC), with a variation of the VR, where rectangular boxes (RB) of four different dimensions were used. Sampling transects were established on a machine operating trail located in a beech (Fagus orientalis Lipsky) stand in Northern Iran. At each transect, three soil samples were collected at three different locations. Samples from different methods were spaced by a 50 cm distance to avoid direct interactions. The soil class of our study area was Combisols according to the WRB classification with a clay texture. Soil bulk density differed significantly between the three sampling methods. The lowest values were obtained with the RB (average 1.25 g cm-3), followed by the VR (average 1.40 g cm-3), and lastly the PSC (average 1.52 g cm-3). The values obtained with four variations of the RB method ranged from 1.22 to 1.28 g cm-3 and were not found significantly different. When soil bulk density was calculated after the removal of the weight and volume of roots included in the samples, the values were determined to be higher than before but with the same range of magnitude. The lowest coefficient of variation was found for RB4 (CV=2.3%), while the highest values were observed for VR and RB1 (CV=5.7%)

Combined Effects of Skidding Direction, Skid Trail Slope and Traffic Frequency on Soil Disturbance in North Mountainous Forest of Iran

Harvest traffic with heavy equipment causes damage to forest soils. Whereas increased soil damage has been reported with increasing harvest equipment traffic and on increasing slope gradients, it is unclear how much soil damage is caused by different directions of skidding. We examined the effects of traffic frequency, skid trail slope and skidding direction on the dry bulk density and total porosity of skidding trail soil in an Iranian temperate forest. The studied treatments included combinations of three different traffic frequencies (3, 7, and 12 passes of a rubber-tired skidder), three levels of slope (20%) and two skidding directions (uphill and downhill). The impact on soil properties was greatest during the skidder initial passes. On steep slopes, only three skidder passes were required to cause substantial increases in soil bulk density relative to control plots, regardless of skidding direction. Independently of the traffic frequency and trail slope, uphill skidding caused substantially greater increases in dry bulk density and greater decreases in soil porosity than did downhill skidding. Total porosity was significantly lower on steep slopes than on gentle slopes regardless of traffic intensity and skidding direction. In general, fewer uphill skidder passes were required to achieve substantial soil disturbance than was the case for downhill skidding, possibly because skidders move more slowly when travelling upwards and uphill skidding places greater loads on the skidder rear axle

Evaluating the Effectiveness of Mulching for Reducing Soil Erosion in Cut Slope and Fill Slope of Forest Roads in Hyrcanian Forests

Forest operations often enhance runoff and soil loss in roads and skid trails, where cut slopes and fill slopes are the most important source of sediment. This study evaluated the effectiveness of four erosion control treatments applied to cut slope and fill slope segments of forest roads of different ages in the Hyrcanian forest in northern Iran. The treatment combinations, each replicated three times, included four classes of mulch cover (bare soil [BS], wood chips cover [WCH], sawdust cover [SC], and rice straw cover [RSC]), two levels of side slope (cut slope and fill slope), two levels of side slope gradient (20–25% and 40–45%), and three levels of road age (three, 10 and 20 years after construction). Mulch cover treatments significantly reduced average surface runoff volume and sediment yield compared to BS. Regardless of erosion control treatment, greater surface runoff volume and soil loss under natural rainfall occurred on steeper slope gradients in all road age classes and decreased with increasing road age on both slope gradients. On cut slopes, average runoff and soil loss from the plots covered with WCH (17.63 l per plot, 2.43 g m–2) was lower than from those covered with SC (22.81 l per plot, 3.50 g m–2), which was lower than from those covered with RSC (29.13 l per plot, 4.41 g m–2 and BS (34.61 l per plot, 4.94 g m–2). On fill slopes, average runoff and soil loss from the plots covered with WCH (14.13 l per plot, 1.99 g m–2) was lower than from plots covered with SC (20.01 l per plot, 3.23 g m–2), which was lower than from plots covered with RSC (24.52 l per plot, 4.06 g m–2) and BS (29.03 l per plot, 4.47 g m–2). Surface cover successfully controlled erosion losses following road construction, particularly on steep side slopes with high erosion potential

Evaluating the Effectiveness of Mulching for Reducing Soil Erosion in Skid Trail Switchbacks

Forest operations can lead to increased runoff and soil loss on roads and skid trails. The aim of this study was to evaluate the effectiveness of two erosion control treatments applied to different segments of skid trails following six natural rainfall events. A total of 162 plots 10 m long by 4 m wide were established in a Hyrcanian deciduous forest to assess soil runoff and soil loss following ground-based harvesting traffic. The experimental setup consisted of three levels of traffic intensity (three, eight and 16 skidder passes), two levels of slope gradient (≤20% and >20%), three classes of curvature (narrow = high deflection angle, 60°–70°; wide = low deflection angle, 110°–130°, and straight trail segments), and three classes of mulch cover (bare soil, sawdust cover, and rice straw cover). Each treatment combination was replicated three times, yielding 972 soil samples. The average surface runoff volume and soil loss differed significantly between the switchbacks and the straight trail segments and depended strongly on the degree of curvature, with severity of adverse effects increasing with curve tightness. Mulch cover treatments had a significant ameliorating effect on the surface runoff volume and soil loss throughout the skid trail. The average runoff and soil loss from the skid trails treated with sawdust cover (SC) (0.24 l m-2 (mm) and 0.49 g m-2, respectively) were lower than on trails covered with rice straw (RSC) (0.45 l m-2 and 1.19 g m-2, respectively), which were, in turn lower than on untreated bare soil (BS) trail segments (0.70 l m-2 and 2.31 g m-2, respectively). Surface runoff volume was significantly positively correlated with soil loss and both were positively correlated with dry bulk density and rut depth and negatively correlated with litter mass, total porosity, and macroporosity. Surface cover is a successful measure for controlling erosion losses following skidding disturbances, particularly in the switchback curves of trails on steep slopes where erosion potential is high

Molecular Detection of gyrA, parC and oprD Mutation in Pseudomonas aeruginosa Isolates from a University Hospital of Isfahan, Iran during 2016

Background:   Excessive use of broad-spectrum antibiotics in hospitals has led to the emergence of highly resistant strains of Pseudomonas aeruginosa. The main mechanism of resistance of this bacterium to fluoroquinolones and carbapenems are the modification of type II topoisomerases (DNA gyrase and topoisomerase IV) and alterations in the OprD porin, respectively. The aim of this study was to examine for the occurrence of mutations related to fluoroquinolone resistance of gyrA and parC genes and mutational inactivation of oprD gene of clinical isolates using DNA sequencing technique. Methods:  A total of 60 P. aeruginosa isolates were collected from the hospitalized patients in the Intensive Care Units (ICUs) of Al-Zahra hospital located in Isfahan, Iran. The pattern of sensitivity to antibiotics was determined using CLSI disk diffusion and MIC methods. The assay was based on a DNA sequencing method using polymerase chain reaction (PCR) for amplification and sequencing of the selected genes. Results:   The results show that replacement of Ile for Thr-83 in gyrA was the only replacement, while other substitutions not observed. No mutations were found in parC. The most frequent amino acid alterations were E185Q, P186G, and V189T, found in five resistance isolates, However, nucleotide insertions and deletions mutations not observed. Conclusion:  Our study suggested that mutation of gyrA and oprD genes may play a minor role in fluoroquinolone and carbapenem resistance and other mechanisms may contribute to the fluoroquinolone and carbapenem resistance of P. aeruginosa

Long-term full-scale intelligent quotient outcomes following pediatric and childhood epilepsy surgery: A systematic review and meta-analysis

OBJECTIVE: Cognitive measures are an important primary outcome of pediatric, adolescents, and childhood epilepsy surgery. The purpose of this systematic review and meta-analysis is to assess whether there are long-term alterations (≥ 5 years) in the Full-Scale Intelligence Quotient (FSIQ) of pediatric patients undergoing epilepsy surgery. METHODS: Electronic databases (EMBASE, MEDLINE, and Scopus) were searched for English articles from inception to October 2022 that examined intelligence outcomes in pediatric epilepsy surgery patients. Inclusion criteria were defined as the patient sample size of ≥ 5, average follow- up of ≥5 years, and surgeries performed on individuals ≤ 18 years old at the time of surgery. Exclusion criteria consisted of palliative surgery, animal studies, and studies not reporting surgical or FSIQ outcomes. Publication bias was assessed using a funnel plot and the Quality in Prognosis Studies (QUIPS) toolset was used for quality appraisal of the selected articles. A random-effects network meta-analysis was performed to compare FSIQ between surgical patients at baseline and follow-up and Mean Difference (MD) was used to calculate the effect size of each study. Point estimates for effects and 95% confidence intervals for moderation analysis were performed on variables putatively associated with the effect size. RESULTS: 21,408 studies were screened for abstract and title. Of these, 797 fit our inclusion and exclusion criteria and proceeded to full-text screening. Overall, seven studies met our requirements and were selected. Quantitative analysis was performed on these studies (N = 330). The mean long-term difference between pre- and post- operative FSIQ scores across all studies was noted at 3.36 [95% CI: (0.14, 6.57), p = 0.04, I2 = 0%] and heterogeneity was low. CONCLUSION: To our knowledge, this is the first meta-analysis to measure the long-term impacts of FSIQ in pediatric and adolescent epilepsy patients. Our overall results in this meta-analysis indicate that while most studies do not show long-term FSIQ deterioration in pediatric patients who underwent epilepsy surgery, there was an increase of 3.36 FSIQ points, however, the observed changes were not clinically significant. Moreover, at the individual patient level analysis, while most children did not show long-term FSIQ deterioration, few had significant decline. These findings indicate the importance of surgery as a viable option for pediatric patients with medically refractory epilepsy

The utilisation of useful ambient energy in residential dwellings to improve thermal comfort and reduce energy consumption

Energy consumption in the housing sector, is significantly high and continues to escalate. Urbanisation due to population growth and migration from rural areas to cities are two main reasons for this rising demand. With the uncertainty in the energy market and the increasing awareness of the impact of fossil fuels on the environment, research work in efficient building design has gained momentum. Energy conservation guidelines in many countries have become mandatory. Howerver, more emphasis has been given to commercial, institutional, governmental and industrial buildings, which commonly employ more efficient HVAC systems than those deployed in houses. Thus, the push towards energy conservation in the residential sector is less noticeable. This is further compounded with the absence of will power to enforce the same energy conservation rules as the case with other sectors. In this paper five passive cooling and heating strategies have been reviewed (passive building design, night ventilation, nocturnal cooling, PCM (Phase Change Material) and IEC (Indirect Evaporative Cooling), solar thermal energy). The aim is to evaluate how to implement them better in a cost-effective way in existing and new houses. The literature review confirmed the need for further investigation of energy efficient HVAC systems with passives strategies solutions for contemporary residential dwellings is required to make a meaningful impact on the energy map of this sector. Also, the viability of an easy to deploy and configure HVAC system for retrofit and new applications for more benefits of these passive strategies either individually or in a hybrid configuration needs to be explored.Innovation and Networks Executive Agency (INEA), European Commissio