Octave-tunable miniature RF resonators

The development and testing of a miniaturized, high-Q, broadly tunable resonator is described. An exemplary device, with a center frequency that is continuously tunable from 1.2 to 2.6 GHz, was tested in detail. Experimental results demonstrated a resonator Q of up to 380, and typical insertion loss of -1.9 dB for a 25 MHz 3-dB bandwidth. These resonators have been used to stabilize a broadly-tunable oscillator with phase noise of -132 dBc/Hz at 100-kHz offset, with a center frequency tunable from 1.2-2.6 GHz, and a tuning speed of 1 GHz/ms

The Use of Bone Morphogenetic Protein in the Intervertebral Disk Space in Minimally Invasive Transforaminal Lumbar Interbody Fusion

Study Design: Retrospective Cohort. Objective: The objective of this study was to characterize one surgeon’s experience over a 10-year period using rhBMP-2 in the disk space for minimally invasive transforaminal lumbar interbody fusion (MIS TLIF). Summary of Background Data: MIS TLIF has been utilized as a technique for decreasing patients’ immediate postoperative pain, decreasing blood loss, and shortened hospital stays. Effectiveness and complications of rhBMP-2’s use in the disk space is limited because of its off-label status. Methods: Retrospective analysis of consecutive MIS TLIFs performed by senior author between 2004 and 2014. rhBMP-2 was used in the disk space in all cases. Patients were stratified based on the dose of rhBMP-2 utilized. Patients had 9 to 12 month computerized tomography scan to evaluate for bony fusion and continued follow-up for 18 months. Results: A total of 688 patients underwent a MIS TLIF. A medium kit of rhBMP-2 was utilized in 97 patients, and small kit was used in 591 patients. Fusion rate was 97.9% and this was not different between the 2 groups with 96/97 patients fusing in the medium kit group and 577/591 patients fusing in the small kit group. Five patients taken back to the operating room for symptomatic pseudoarthrosis, 4 reoperated for bony hyperostosis, and 10 radiographic pseudoarthroses that did not require reoperation. A statistically significant difference in the rate of foraminal hyperostosis was found when using a medium sized kit of rhBMP-2 was 4.12% (4/97 patients), compared with a small kit (0/591 patients, P=0.0004). Conclusions: Utilization of rhBMP-2 in an MIS TLIF leads to high fusion rate (97.9%), with an acceptable complication profile. The development of foraminal hyperostosis is a rare complication that only affected 0.6% of patients, and seems to be a dose related complication, as this complication was eliminated when a lower dose of rhBMP-2 was utilized

Bubble-Driven Inertial Micropump

The fundamental action of the bubble-driven inertial micropump is investigated. The pump has no moving parts and consists of a thermal resistor placed asymmetrically within a straight channel connecting two reservoirs. Using numerical simulations, the net flow is studied as a function of channel geometry, resistor location, vapor bubble strength, fluid viscosity, and surface tension. Two major regimes of behavior are identified: axial and non-axial. In the axial regime, the drive bubble either remains inside the channel or continues to grow axially when it reaches the reservoir. In the non-axial regime the bubble grows out of the channel and in all three dimensions while inside the reservoir. The net flow in the axial regime is parabolic with respect to the hydraulic diameter of the channel cross-section but in the non-axial regime it is not. From numerical modeling, it is determined that the net flow is maximal when the axial regime crosses over to the non-axial regime. To elucidate the basic physical principles of the pump, a phenomenological one-dimensional model is developed and solved. A linear array of micropumps has been built using silicon-SU8 fabrication technology, and semi-continuous pumping across a 2 mm-wide channel has been demonstrated experimentally. Measured variation of the net flow with fluid viscosity is in excellent agreement with simulation results.Comment: 18 pages, 18 figures, single colum

Effects of Classical Exposure Measurement Error on the Shape of Exposure-Disease Associations

In epidemiology many exposures of interest are measured with error. Random, or 'classical', error in exposure measurements attenuates linear exposure-disease associations. However, its precise effects on different nonlinear associations are not well known. We use simulation studies to assess how classical measurement error affects observed association shapes and power to detect nonlinearity. We focus on a proportional hazards model for the exposure-disease association and consider six true association shapes of relevance in epidemiology: linear, threshold, U-shaped, J- shaped, increasing quadratic, asymptotic. The association shapes are modeled using three popular methods: grouped exposure analyses, fractional polynomials, P-splines. Under each true association shape and each method we illustrate the effects of classical exposure measurement error, considering varying degrees of random error. We also assess what we refer to as MacMahon's method for correcting for classical exposure measurement error under grouped exposure analyses, which uses replicate measurements to estimate usual exposure within observed exposure groups. The validity of this method for nonlinear associations has not previously been investigated. Under nonlinear exposure-disease associations, classical measurement error results in increasingly linear shapes and not always an attenuated association at a given exposure level. Fractional polynomials and P-splines give similar results and offer advantages over grouped exposure analyses by providing realistic models. P-splines offer greatest power to detect nonlinearity, however random exposure measurement error results in a potential considerable loss of power to detect nonlinearity under all methods. MacMahon's method performs well for quadratic associations, but does not in general recover nonlinear shapes

Incommensurate spin correlations in Heisenberg spin-1/2 zig-zag ladders

We develop a low-energy effective theory for spin-1/2 frustrated two-leg Heisenberg spin ladders. We obtain a new type of interchain coupling that breaks parity symmetry. In the presence of an XXZ-type anisotropy, this interaction gives rise to a novel ground state, characterized by incommensurate correlations. In the case of a single ladder, this state corresponds to a spin nematic phase. For a frustrated quasi-one-dimensional system of infinitely many weakly coupled chains, this state develops true three dimensional spiral order. We apply our theory to recent neutron scattering experiments on $Cs_2CuCl_4$.Comment: 4 pages of revtex, 3 figure

General health and residential proximity to the coast in Belgium : results from a cross-sectional health survey

The health risks of coastal areas have long been researched, but the potential benefits for health are only recently being explored. The present study compared the general health of Belgian citizens a) according to the EU's definition of coastal ( 50 km), and b) between eight more refined categories of residential proximity to the coast ( 250 km). Data was drawn from the Belgian Health Interview Survey (n = 60,939) and investigated using linear regression models and mediation analyses on several hypothesized mechanisms. Results indicated that populations living 50-100 km. Four commonly hypothesized mechanisms were considered but no indirect associations were found: scores for mental health, physical activity levels and social contacts were not higher at 0-5 km from the coast, and air pollution (PM ic , concentrations) was lower at 0-5 km from the coast but not statistically associated with better health. Results are controlled for typical variables such as age, sex, income, neighbourhood levels of green and freshwater blue space, etc. The spatial urban-rural-nature mosaic at the Belgian coast and alternative explanations are discussed. The positive associations between the ocean and human health observed in this study encourage policy makers to manage coastal areas sustainably to maintain associated public health benefits into the future

Is graphene on copper doped?

Angle-resolved photoemission spectroscopy (ARPES) and X-ray photoemission spectroscopy have been used to characterise epitaxially ordered graphene grown on copper foil by low-pressure chemical vapour deposition. A short vacuum anneal to 200 °C allows observation of ordered low energy electron diffraction patterns. High quality Dirac cones are measured in ARPES with the Dirac point at the Fermi level (undoped graphene). Annealing above 300 °C produces n-type doping in the graphene with up to 350 meV shift in Fermi level, and opens a band gap of around 100 meV. Dirac cone dispersion for graphene on Cu foil after vacuum anneals (left: 200 °C, undoped; right: 500 °C, n-doped). Centre: low energy electron diffraction from graphene on Cu foil after 200 °C anneal. Data from Antares (SOLEIL)

Predicting the cosmological constant with the scale-factor cutoff measure

It is well known that anthropic selection from a landscape with a flat prior distribution of cosmological constant Lambda gives a reasonable fit to observation. However, a realistic model of the multiverse has a physical volume that diverges with time, and the predicted distribution of Lambda depends on how the spacetime volume is regulated. We study a simple model of the multiverse with probabilities regulated by a scale-factor cutoff, and calculate the resulting distribution, considering both positive and negative values of Lambda. The results are in good agreement with observation. In particular, the scale-factor cutoff strongly suppresses the probability for values of Lambda that are more than about ten times the observed value. We also discuss several qualitative features of the scale-factor cutoff, including aspects of the distributions of the curvature parameter Omega and the primordial density contrast Q.Comment: 16 pages, 6 figures, 2 appendice

Can greater muscularity in larger individuals resolve the 3/4 power-law controversy when modelling maximum oxygen uptake?

BACKGROUND: The power function relationship, MR = a.m(b), between metabolic rate (MR) and body mass m has been the source of much controversy amongst biologists for many years. Various studies have reported mass exponents (b) greater than the anticipated 'surface-area' exponent 0.67, often closer to 0.75 originally identified by Kleiber. AIM: The study aimed to provide a biological explanation for these 'inflated' exponents when modelling maximum oxygen uptake (max), based on the observations from this and previous studies that larger individuals develop disproportionately more muscle mass in the arms and legs. RESEARCH DESIGN AND SUBJECTS: A cross-sectional study of 119 professional soccer players from Croatia aged 18-34 was carried out. RESULTS: Here we confirm that the power function relationship between max and body mass of the professional soccer players results in an 'inflated' mass exponent of 0.75 (95% confidence interval from 0.56 to 0.93), but also the larger soccer players have disproportionately greater leg muscle girths. When the analysis was repeated incorporating the calf and thigh muscle girths rather than body mass as predictor variables, the analysis not only explained significantly more of the variance in max, but the sum of the exponents confirmed a surface-area law. CONCLUSIONS: These findings confirm the pitfalls of fitting body-mass power laws and suggest using muscle-girth methodology as a more appropriate way to scale or normalize metabolic variables such as max for individuals of different body sizes