Poboljšanje fizičko-mehaničkih svojstava karbamazepina prekristalizacijom pri različitim pH

The morphology of crystals has an appreciable impact on the physicochemical properties of drugs. Drug properties such as flowability, dissolution, hardness and bioavailability may be affected by crystallinity behaviors of drugs. The objective of this study was to achieve improved physicomechanical properties of carbamazepine powder through recrystallization from aqueous solutions at different pH values. For this purpose, carbamazapine was recrystallized from aqueous solutions at different pH values (1, 7, 11). The morphology of crystals was investigated using scanning electron microscopy; X-ray powder diffraction (XRPD) was used to identify polymorphism; thermodynamic properties were analyzed using differential scanning calorimetery (DSC). Dissolution was determined using USP dissolution apparatus. Mechanical behavior of recrystallized carbamazepine powders was investigated by making tablets under different compaction pressures and measuring their hardness. SEM studies showed that carbamazepine crystallization in different media affected the morphology and size of carbamazepine crystals. The shape of carbamazepine crystals changed from flaky or thin plate-like to needle-shaped. XRPD and DSC results ruled out any crystallinity changes occurring due to the temperature or pH of crystallization media. The crushing strength of tablets indicated that all the recrystallized carbamazepine samples had better compactibility than the original carbamazepine powder. In vitro dissolution studies of carbamazepine samples showed a higher dissolution rate of carbamazepine crystals obtained from media with pH 11 and 1. Carbamazepine particles recrystallized from aqueous solutions of different pH values (all media) appeared to have superior mechanical properties to those of the original carbamazepine sample.Morfologija kristala ima značajan utjecaj na fizičko-mehanička svojstva lijekova. Kristaliničnost može utjecati na tečnost, oslobađanje, tvrdoću i bioraspoloživost lijekova. Cilj ovog rada bio je poboljšati fizičko-mehanička svojstva praha karbamazepina prekristalizacijom iz vodenih otopina pri različitim pH vrijednostima (1, 7 i 11). Fizičko-mehanička svojstva prekristaliziranog karbamazepina određivana su na sljedeći način: morfologija kristala ispitivana je pretražnom elektronskom mikroskopijom, polimorfi su identificirani rendgenskom difrakcijom praha (XRPD), a termodinamička svojstva analizirana su diferencijalnom pretražnom kalorimetrijom (DSC). Topljivost je određena pomoću aparata prema USP. Mehanička svojstva prekristaliziranog karbamazepina ispitivana su tijekom tabletiranja pri različitim tlakovima i mjerenjem tvrdoće nastalih tableta. SEM ispitivanja pokazala su da kristalizacija karbamazepina iz različitih medija utječe na morfologiju i veličinu kristala. Oblik kristala mijenjao se od pahuljastog ili pločastog do igličastog. Rezultati dobiveni XRPD i DSC metodama isključili su promjene kristaliničnosti zbog temperature ili pH medija. Mjerenjem lomljivosti tableta utvrđeno je da su svi prekristalizirani uzorci karbamazepina bili kompaktniji od polaznog praškastog uzorka. Ispitivanja topljivosti in vitro pokazala su da su kristali dobiveni iz otopine s pH 11 i 1 topljiviji. Uzorci karbamazepina dobiveni prekristalizacijom iz vodenih otopina različite pH vrijednosti imali su bolja mehanička svojstva od originalnog uzorka karbamazepina

Epigenetic Gene Promoter Methylation at Birth Is Associated With Child’s Later Adiposity

Objective: fixed genomic variation explains only a small proportion of the risk of adiposity. In animal models, maternal diet alters offspring body composition, accompanied by epigenetic changes in metabolic control genes. Little is known about whether such processes operate in humans.Research design and methods: using Sequenom MassARRAY we measured the methylation status of 68 CpGs 5? from five candidate genes in umbilical cord tissue DNA from healthy neonates. Methylation varied greatly at particular CpGs: for 31 CpGs with median methylation ?5% and a 5–95% range ?10%, we related methylation status to maternal pregnancy diet and to child’s adiposity at age 9 years. Replication was sought in a second independent cohort.Results: in cohort 1, retinoid X receptor-? (RXRA) chr9:136355885+ and endothelial nitric oxide synthase (eNOS) chr7:150315553+ methylation had independent associations with sex-adjusted childhood fat mass (exponentiated regression coefficient [?] 17% per SD change in methylation [95% CI 4–31], P = 0.009, n = 64, and ? = 20% [9–32], P < 0.001, n = 66, respectively) and %fat mass (? = 10% [1–19], P = 0.023, n = 64 and ? =12% [4–20], P = 0.002, n = 66, respectively). Regression analyses including sex and neonatal epigenetic marks explained >25% of the variance in childhood adiposity. Higher methylation of RXRA chr9:136355885+, but not of eNOS chr7:150315553+, was associated with lower maternal carbohydrate intake in early pregnancy, previously linked with higher neonatal adiposity in this population. In cohort 2, cord eNOS chr7:150315553+ methylation showed no association with adiposity, but RXRA chr9:136355885+ methylation showed similar associations with fat mass and %fat mass (? = 6% [2–10] and ? = 4% [1–7], respectively, both P = 0.002, n = 239).Conclusions: our findings suggest a substantial component of metabolic disease risk has a prenatal developmental basis. Perinatal epigenetic analysis may have utility in identifying individual vulnerability to later obesity and metabolic diseas

Powder Compaction: Compression Properties of Cellulose Ethers

Effective development of matrix tablets requires a comprehensive understanding of different raw material attributes and their impact on process parameters. Cellulose ethers (CE) are the most commonly used pharmaceutical excipients in the fabrication of hydrophilic matrices. The innate good compression and binding properties of CE enable matrices to be prepared using economical direct compression (DC) techniques. However, DC is sensitive to raw material attributes, thus, impacting the compaction process. This article critically reviews prior knowledge on the mechanism of powder compaction and the compression properties of cellulose ethers, giving timely insight into new developments in this field

Evidence-based nanoscopic and molecular framework for excipient functionality in compressed orally disintegrating tablets

The work investigates the adhesive/cohesive molecular and physical interactions together with nanoscopic features of commonly used orally disintegrating tablet (ODT) excipients microcrystalline cellulose (MCC) and D-mannitol. This helps to elucidate the underlying physico-chemical and mechanical mechanisms responsible for powder densification and optimum product functionality. Atomic force microscopy (AFM) contact mode analysis was performed to measure nano-adhesion forces and surface energies between excipient-drug particles (6-10 different particles per each pair). Moreover, surface topography images (100 nm2-10 μm2) and roughness data were acquired from AFM tapping mode. AFM data were related to ODT macro/microscopic properties obtained from SEM, FTIR, XRD, thermal analysis using DSC and TGA, disintegration testing, Heckel and tabletability profiles. The study results showed a good association between the adhesive molecular and physical forces of paired particles and the resultant densification mechanisms responsible for mechanical strength of tablets. MCC micro roughness was 3 times that of D-mannitol which explains the high hardness of MCC ODTs due to mechanical interlocking. Hydrogen bonding between MCC particles could not be established from both AFM and FTIR solid state investigation. On the contrary, D-mannitol produced fragile ODTs due to fragmentation of surface crystallites during compression attained from its weak crystal structure. Furthermore, AFM analysis has shown the presence of extensive micro fibril structures inhabiting nano pores which further supports the use of MCC as a disintegrant. Overall, excipients (and model drugs) showed mechanistic behaviour on the nano/micro scale that could be related to the functionality of materials on the macro scale. © 2014 Al-khattawi et al

The influence of PVP incorporation on moisture-induced surface crystallization of amorphous spray-dried lactose particles

We have recently shown that atomic force microscopy (AFM) may be an appropriate method for characterisation of the re-crystallization of amorphous particles. In this study, spray-dried composite particles consisting of lactose and polyvinyl pyrrolidon (PVP) were characterised by AFM and electron spectroscopy for chemical analysis (ESCA), and their response on increasing the relative humidity (RH) was investigated. The PVP content in the particles used was 0, 5 or 25 wt.% of either PVP K17 or PVP K90. All composite particles were found to be enriched with PVP at the surface. The incorporation of PVP in the particles influenced the way the particles responded to an increase in RH. The specific RH interval in which the surface of the particles smoothened and the RH where crystallization could be detected, increased with an increase in the amount and molecular weight of the PVP in the particles. The crystallization kinetics of single particles was analysed with AFM and by utilising the JMAK equation. The rate constant for this transformation increased in an exponential manner with increasing RH. Furthermore, above the RH needed for the crystallization to occur, the exponential increase in the crystallization rate was larger for particles with higher polymer content which indicates that the stabilising effect decreases as the water content in the particles becomes higher. In this study we report a method for determination of crystallization kinetics on single composite particles, which is valuable when evaluating the effect of stabilisers in amorphous powders