166 research outputs found
Discrete-Time Controllability for Feedback Quantum Dynamics
Controllability properties for discrete-time, Markovian quantum dynamics are
investigated. We find that, while in general the controlled system is not
finite-time controllable, feedback control allows for arbitrary asymptotic
state-to-state transitions. Under further assumption on the form of the
measurement, we show that finite-time controllability can be achieved in a time
that scales linearly with the dimension of the system, and we provide an
iterative procedure to design the unitary control actions
Comparative Analysis of Sliding Resistance of Different Lingual Systems
Objective: To analyse and compare the frictional properties of 4 lingual systems combined with two types of stainless steel archwire (0.016x0.022, 0.018x0.025) and a 0.018x0.025 TMA archwire by simulating different misalignment situations in vitro. Material and Methods: Five randomly chosen brackets from each system (e-Brace, Harmony, Incognito, and STb) were used for the measurements and to simulate an upper first premolar extraction case. The friction tests were performed using a material testing machine in combination with a specialized test rig. Results: The lowest absolute friction values were found with the 0.016x0.022 SS wire in a passive configuration. STb provided the lowest mean friction, while Harmony brackets displayed the highest friction. The TMA Beta Titanium wire showed the highest friction values, but maintained proportions similar to those of the other wires as tip and torsion increased. Conclusion: The type of bracket has a significant impact on friction, and there is a positive correlation between mesiodistal bracket width and resistance to sliding. The archwire sections and materials and the vertical displacement, also significantly affect the friction generated by the system
Delineation of flood‐prone areas in cliffed coastal regions through a procedure based on the geomorphic flood index
The geomorphic flood index (GFI) method provides a good representation of flood-prone areas. However, the method does not account for floodwater transfers in undefined interbasins (UIBs), which represent intercluded small basins along the coastline likely to be flooded by adjacent major rivers. The present work addresses this shortcoming by complementing the GFI approach with an iterative procedure that considers UIBs and water transfers between basins. The methodology was tested on a coastal basin in southern Italy and the outcome was compared with a flood map obtained by a two-dimensional hydraulic simulation. GFI performance as a morphological descriptor improved from 74% (standard method) to 94% with the addition of the iterative procedure. The proposed methodology, with the same parameterization, was applied on a second adjacent coastal basin obtaining improvements both in terms of true positive (from 56 to 79%) and false negative rates (from 44 to 21%). Finally, a sensitivity analysis to the flood return periods highlighted a strong influence on model parameterization for return periods below 20 years. This achievement represents a new development in the application of the GFI method, which can help stakeholders in a more time- and cost-effective flood risk management in hazard-prone areas
Completeness of the Bethe Ansatz solution of the open XXZ chain with nondiagonal boundary terms
A Bethe Ansatz solution of the open spin-1/2 XXZ quantum spin chain with
nondiagonal boundary terms has recently been proposed. Using a numerical
procedure developed by McCoy et al., we find significant evidence that this
solution can yield the complete set of eigenvalues for generic values of the
bulk and boundary parameters satisfying one linear relation. Moreover, our
results suggest that this solution is practical for investigating the ground
state of this model in the thermodynamic limit.Comment: 15 pages, LaTeX; amssymb, amsmath, no figures, 5 tables; v2 contains
an additional footnote and a "Note Added"; v3 contains an Addendu
Waste of batteries management: Synthesis of magnetocaloric manganite compound from the REEs mixture generated during hydrometallurgical processing of NiMH batteries
In the present study, rare earth elements (REEs, i.e., La, Ce, Nd, and Pr) were hydrometallurgically recovered in oxalate form with presence of very low concentration of Co, Al, Zn and Ni from solution after processing of spent Nickel metal hydride (Ni-MH) batteries. The recovered mixture was used as alternative source in the synthesis of magnetocaloric materials. In this study, a manganite sample with general formula ABO3 was selected to be prepared since it is relatively easy to synthesize and is tuneable by adjustment of the doping concentration. The conventional solid-state reaction method was used to prepare an orthorhombic structure of manganite with presence of REE2O3 and MnO2 as secondary phases reported from x-ray pattern at room temperature. The thermomagnetic measurements showed a PM to FM transition at 184 K in a 0.01 T magnetic field that shifts to 194 K by increasing the magnetic field to 1.8 T. The magnetocaloric properties were determined by calculating the isothermal entropy change and directly measuring the adiabatic temperature change. A reversible magnetocaloric effect was observed
Scale-Up of Magnetocaloric NiCoMnIn Heuslers by Powder Metallurgy for Room Temperature Magnetic Refrigeration
We present a new approach for a large-scale production of the rare-earth free NiCoMnIn Heusler alloy for room temperature magnetic refrigeration applications. This class of compounds has recently attracted attention, thanks to the large reversible isothermal entropy change (ΔSiso) and adiabatic temperature change (ΔTad) associated to a first-order magnetostructural phase transition. A large-scale production method, however, has not yet been proposed. For giant magnetocaloric materials and especially for Heusler compounds, the synthesis has a predominant role in tailoring the physical–chemical properties, due to the high sensitivity of the first-order transition characteristics on chemical composition and microstructure. Up to 250 g of the nominal composition Ni45.7Co4.2Mn36.6In13.3 alloy was prepared in a unique sample starting from industrial-grade powdered elements. The phase transition temperatures and magnetocaloric properties were investigated by magnetic and direct adiabatic temperature measurements and were found to be homogeneous in the whole sample. The mechanical stability of the produced alloy and its workability were investigated. A low-temperature thermal treatment was identified and showed promising results by reducing hysteresis and transition width
Co and In Doped Ni-Mn-Ga Magnetic Shape Memory Alloys: A Thorough Structural, Magnetic and Magnetocaloric Study
In Ni-Mn-Ga ferromagnetic shape memory alloys, Co-doping plays a major role in determining a peculiar phase diagram where, besides a change in the critical temperatures, a change of number, order and nature of phase transitions (e.g., from ferromagnetic to paramagnetic or from paramagnetic to ferromagnetic, on heating) can be obtained, together with a change in the giant magnetocaloric effect from direct to inverse. Here we present a thorough study of the intrinsic magnetic and structural properties, including their dependence on hydrostatic pressure, that are at the basis of the multifunctional behavior of Co and In-doped alloys. We study in depth their magnetocaloric properties, taking advantage of complementary calorimetric and magnetic techniques, and show that if a proper measurement protocol is adopted they all merge to the same values, even in case of first order transitions. A simplified model for the estimation of the adiabatic temperature change that relies only on indirect measurements is proposed, allowing for the quick and reliable evaluation of the magnetocaloric potentiality of new materials starting from readily available magnetic measurements
Validation and Ecological Niche Investigation of a New Fungal Intraspecific Competitor as a Biocontrol Agent for the Sustainable Containment of Aflatoxins on Maize Fields
Crop yield and plant products quality are directly or indirectly affected by climate alterations. Adverse climatic conditions often promote the occurrence of different abiotic stresses, which can reduce or enhance the susceptibility to pests or pathogens. Aflatoxin producing fungi, in particular, whose diffusion and deleterious consequences on cereals commodities have been demonstrated to highly depend on the temperature and humidity conditions that threaten increasingly larger areas. Biological methods using intraspecific competitors to prevent fungal development and/or toxin production at the pre-harvest level are particularly promising, even if their efficacy could be affected by the ecological interaction within the resident microbial population. A previously characterized Aspergillus flavus atoxigenic strain was applied in two maize fields to validate its effectiveness as a biocontrol agent against aflatoxin contamination. At one month post-application, at the harvest stage, its persistence within the A. flavus population colonizing the maize kernels in the treated area was assessed, and its efficacy was compared in vitro with a representation of the isolated atoxigenic population. Results proved that our fungal competitor contained the aflatoxin level on maize grains as successfully as a traditional chemical strategy, even if representing less than 30% of the atoxigenic strains re-isolated, and achieved the best performance (in terms of bio-competitive potential) concerning endogenous atoxigenic isolates
- …