Development of selective Pd–Ag membranes on porous metal filters

Metallic supports with sufficient surface quality to achieve highly selective thin Pd–Ag membranes require specific pre-treatments, are not readily available on the market and are generally very expensive. To reduce costs, rough and large media grade Hastelloy X filters have been acquired and pre-treated via polishing and chemical etching. The loss in gas permeance given by the polishing treatment proved fully recovered after chemical etching. A method to fill the large pores of the filters via aspiration of α-Al2O3 water-powder suspension has been applied and characterized via imaging of the filled pores, inferential statistics, and capillary flow porometry measurements. The most suitable filler particle size for pore size distribution reduction has been identified as 18 μm, while a 5 μm filler proved optimal for further pore morphology improvement. The wide pore size distribution of the filters has thus been reduced up to 200 nm by filling with α-Al2O3 particles of decreasing size, similarly to the ceramic supports used for thin Pd–Ag membranes deposition. A boehmite based interdiffusion barrier has been deposited, achieving further surface roughness reduction. A highly H2 selective membrane has been obtained via simultaneous Pd–Ag plating on the pre-treated filter

Internal states of model isotropic granular packings. III. Elastic properties

In this third and final paper of a series, elastic properties of numerically simulated isotropic packings of spherical beads assembled by different procedures and subjected to a varying confining pressure P are investigated. In addition P, which determines the stiffness of contacts by Hertz's law, elastic moduli are chiefly sensitive to the coordination number, the possible values of which are not necessarily correlated with the density. Comparisons of numerical and experimental results for glass beads in the 10kPa-10MPa range reveal similar differences between dry samples compacted by vibrations and lubricated packings. The greater stiffness of the latter, in spite of their lower density, can hence be attributed to a larger coordination number. Voigt and Reuss bounds bracket bulk modulus B accurately, but simple estimation schemes fail for shear modulus G, especially in poorly coordinated configurations under low P. Tenuous, fragile networks respond differently to changes in load direction, as compared to load intensity. The shear modulus, in poorly coordinated packings, tends to vary proportionally to the degree of force indeterminacy per unit volume. The elastic range extends to small strain intervals, in agreement with experimental observations. The origins of nonelastic response are discussed. We conclude that elastic moduli provide access to mechanically important information about coordination numbers, which escape direct measurement techniques, and indicate further perspectives.Comment: Published in Physical Review E 25 page

Internal states of model isotropic granular packings. I. Assembling process, geometry and contact networks

This is the first paper of a series of three, reporting on numerical simulation studies of geometric and mechanical properties of static assemblies of spherical beads under an isotropic pressure. Frictionless systems assemble in the unique random close packing (RCP) state in the low pressure limit if the compression process is fast enough, slower processes inducing traces of crystallization, and exhibit specific properties directly related to isostaticity of the force-carrying structure. The different structures of frictional packings assembled by various methods cannot be classified by the sole density. While lubricated systems approach RCP densities and coordination number z^*~=6 on the backbone in the rigid limit, an idealized "vibration" procedure results in equally dense configurations with z^*~=4.5. Near neighbor correlations on various scales are computed and compared to available laboratory data, although z^* values remain experimentally inaccessible. Low coordination packings have many rattlers (more than 10% of the grains carry no force), which should be accounted for on studying position correlations, and a small proportion of harmless "floppy modes" associated with divalent grains. Frictional packings, however slowly assembled under low pressure, retain a finite level of force indeterminacy, except in the limit of infinite friction.Comment: 29 pages. Published in Physical Review

Produção e valor nutritivo da forragem de capim-elefante em dois sistemas de produção.

Esta pesquisa foi realizada com o objetivo de avaliar a produção e o valor nutritivo da forragem de capimelefante cultivado em sistemas convencional e agroecológico. No sistema convencional, o capim-elefante foi estabelecido em cultivo exclusivo, em linhas com espaçamento de 1,4 m e, no sistema agroecológico, em linhas afastadas 3 m. Nas entrelinhas, estabeleceu-se azevém no período hibernal para desenvolvimento de espécies de crescimento espontâneo no período estival. Avaliaram-se a massa, a produção e a composição botânica e estrutural da forragem e a carga animal. Amostras de simulação de pastejo foram coletadas para determinação dos teores de proteína bruta e fibra em detergente neutro e da digestibilidade in vitro da matéria seca e matéria orgânica. O delineamento experimental foi o inteiramente casualizado com dois tratamentos (sistemas convencional e agroecológico) e duas repetições (piquetes). Valores mais elevados para massa de forragem, produção de forragem, taxa de acúmulo diário e carga animal foram observados no sistema convencional. A relação folha:colmo foi similar entre os sistemas. Valor mais elevado de proteína bruta foi observado no sistema agroecológico. O capim-elefante sob manejo convencional apresenta maior produção de forragem, com menores teores de proteína bruta. O sistema agroecológico apresenta melhor distribuição da produção de forragem no decorrer do ano

Growth Dynamics of Australia's Polar Dinosaurs

Analysis of bone microstructure in ornithopod and theropod dinosaurs from Victoria, Australia, documents ontogenetic changes, providing insight into the dinosaurs' successful habitation of Cretaceous Antarctic environments. Woven-fibered bone tissue in the smallest specimens indicates rapid growth rates during early ontogeny. Later ontogeny is marked by parallel-fibered tissue, suggesting reduced growth rates approaching skeletal maturity. Bone microstructure similarities between the ornithopods and theropods, including the presence of LAGs in each group, suggest there is no osteohistologic evidence supporting the hypothesis that polar theropods hibernated seasonally. Results instead suggest high-latitude dinosaurs had growth trajectories similar to their lower-latitude relatives and thus, rapid early ontogenetic growth and the cyclical suspensions of growth inherent in the theropod and ornithopod lineages enabled them to successfully exploit polar regions

Theropod Fauna from Southern Australia Indicates High Polar Diversity and Climate-Driven Dinosaur Provinciality

The Early Cretaceous fauna of Victoria, Australia, provides unique data on the composition of high latitude southern hemisphere dinosaurs. We describe and review theropod dinosaur postcranial remains from the Aptian–Albian Otway and Strzelecki groups, based on at least 37 isolated bones, and more than 90 teeth from the Flat Rocks locality. Several specimens of medium- and large-bodied individuals (estimated up to ∼8.5 metres long) represent allosauroids. Tyrannosauroids are represented by elements indicating medium body sizes (∼3 metres long), likely including the holotype femur of Timimus hermani, and a single cervical vertebra represents a juvenile spinosaurid. Single specimens representing medium- and small-bodied theropods may be referrable to Ceratosauria, Ornithomimosauria, a basal coelurosaur, and at least three taxa within Maniraptora. Thus, nine theropod taxa may have been present. Alternatively, four distinct dorsal vertebrae indicate a minimum of four taxa. However, because most taxa are known from single bones, it is likely that small-bodied theropod diversity remains underestimated. The high abundance of allosauroids and basal coelurosaurs (including tyrannosauroids and possibly ornithomimosaurs), and the relative rarity of ceratosaurs, is strikingly dissimilar to penecontemporaneous dinosaur faunas of Africa and South America, which represent an arid, lower-latitude biome. Similarities between dinosaur faunas of Victoria and the northern continents concern the proportional representatation of higher clades, and may result from the prevailing temperate–polar climate of Australia, especially at high latitudes in Victoria, which is similar to the predominant warm–temperate climate of Laurasia, but distinct from the arid climate zone that covered extensive areas of Gondwana. Most dinosaur groups probably attained a near-cosmopolitan distribution in the Jurassic, prior to fragmentation of the Pangaean supercontinent, and some aspects of the hallmark ‘Gondwanan’ fauna of South America and Africa may therefore reflect climate-driven provinciality, not vicariant evolution driven by continental fragmentation. However, vicariance may still be detected at lower phylogenetic levels