25 research outputs found

    Two-dimensional core–shell donor–acceptor assemblies at metal–organic interfaces promoted by surface-mediated charge transfer

    Get PDF
    Organic charge transfer (CT) complexes obtained by combining molecular electron donors and acceptors have attracted much interest due to their potential applications in organic opto-electronic devices. In order to work, these systems must have an electronic matching – the highest occupied molecular orbital (HOMO) of the donor must couple with the lowest unoccupied molecular orbital (LUMO) of the acceptor – and a structural matching, so as to allow direct intermolecular CT. Here it is shown that, when molecules are adsorbed on a metal surface, novel molecular organizations driven by surface-mediated CT can appear that have no counterpart in condensed phase non-covalent assemblies of donor and acceptor molecules. By means of scanning tunneling microscopy and spectroscopy it is demonstrated that the electronic and self-assembly properties of an electron acceptor molecule can change dramatically in the presence of an additional molecular species with marked electron donor character, leading to the formation of unprecedented core–shell assemblies. DFT and classical force-field simulations reveal that this is a consequence of charge transfer from the donor to the acceptor molecules mediated by the metallic substrate

    Two-dimensional ketone-driven metal-organic coordination on Cu(111)

    Get PDF
    Two-dimensional metal-organic nanostructures based on the binding of ketone groups and metal atoms were fabricated by depositing pyrene-4,5,9,10-tetraone (PTO) molecules on a Cu(111) surface. The strongly electronegative ketone moieties bind to either copper adatoms from the substrate or co-deposited iron atoms. In the former case, scanning tunnelling microscopy images reveal the development of an extended metal-organic supramolecular structure. Each copper adatom coordinates two ketone ligands of two neighbouring PTO molecules, forming chains that are linked together into large islands via secondary van der Waals interactions. Deposition of iron atoms leads to a transformation of this assembly resulting from the substitution of the metal centres. Density functional theory calculations reveal that the driving force for the metal substitution is primarily determined by the strength of the ketone-metal bond, which is higher for Fe compared to Cu. This second class of nanostructures displays a structural dependence on the rate of iron deposition

    FePc Adsorption on the Moir\'e Superstructure of Graphene Intercalated with a Co Layer

    Get PDF
    The moir\'e superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moir\'e pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moir\'e superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface.Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem. C , copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.jpcc.6b0987

    TCNQ physisorption on the Bi2Se3 topological insulator

    Get PDF
    Topological insulators are promising candidates for spintronic applications due to their topologically protected, spin-momentum locked and gapless surface states. The breaking of the time-reversal symmetry after the introduction of magnetic impurities, such as 3d transition metal atoms embedded in two-dimensional molecular networks, could lead to several phenomena interesting for device fabrication. The first step towards the fabrication of metal-organic coordination networks on the surface of a topological insulator is to investigate the adsorption of the pure molecular layer, which is the aim of this study. Here, the effect of the deposition of the electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecules on the surface of a prototypical topological insulator, bismuth selenide (Bi2Se3), is investigated. Scanning tunneling microscope images at low-temperature reveal the formation of a highly ordered two-dimensional molecular network. The essentially unperturbed electronic structure of the topological insulator observed by photoemission spectroscopy measurements demonstrates a negligible charge transfer between the molecular layer and the substrate. Density functional theory calculations confirm the picture of a weakly interacting adsorbed molecular layer. These results reveal significant potential of TCNQ for the realization of metal-organic coordination networks on the topological insulator surface

    Anomalous coarsening driven by reversible charge transfer at metal–organic interfaces

    Get PDF
    The unique electronic properties and functional tunability of polycyclic aromatic hydrocarbons have recently fostered high hopes for their use in flexible, green, portable, and cheap technologies. Most applications require the deposition of thin molecular films onto conductive electrodes. The growth of the first few molecular layers represents a crucial step in the device fabrication since it determines the structure of the molecular film and the energy level alignment of the metal–organic interface. Here, we explore the formation of this interface by analyzing the interplay between reversible molecule–substrate charge transfer, yielding intermolecular repulsion, and van der Waals attractions in driving the molecular assembly. Using a series of ad hoc designed molecules to balance the two effects, we combine scanning tunnelling microscopy with atomistic simulations to study the self-assembly behavior. Our systematic analysis identifies a growth mode characterized by anomalous coarsening that we anticipate to occur in a wide class of metal–organic interfaces and which should thus be considered as integral part of the self-assembly process when depositing a molecule on a conducting surface

    Using electrostatic interactions to control supramolecular self-assembly at surfaces

    No full text
    This thesis is focused on the links between charge transfer (CT) at metalorganic (MO) interfaces, creation of surface dipoles and two-dimensional supramolecular assembly. Although several examples can be found in the literature where molecular self-assembly on surfaces was influenced by the formation of interfacial dipoles, only in a few cases were the results fully rationalised and only a posteriori. The MO interface resulting from the deposition of the molecules used for these studies (chosen for their relevance as building blocks for applications in organic opto-electronic, photovoltaic, or proposed organic spintronics devices) is usually very complex. This is mainly due to the chemical structure of these molecules and to their strong interaction with the substrate. A clear identification of the different fundamental processes (such as CT and formation of interfacial dipoles) is thus highly difficult. The approach followed in this thesis is markedly different: specific molecules were rationally designed and subsequently synthesised in order to obtain model systems where the different parameters could be clearly isolated and identified. The presented work is the result of a close collaboration with other two research groups: the organic synthetic chemistry group of Prof. D. Bonifazi and the theoretical group of Prof. A. De Vita. The study was addressed through a complementary multi-disciplinary theoretical and experimental investigation, including the synthesis of new molecules, the analysis of their self-assembly by scanning tunnelling microscopy and spectroscopy and the use of density functional theory calculations and Monte Carlo simulations for the theoretical modelling of the systems. A balance between omnipresent short-range van der Waals attractive forces and long-range repulsive interactions generated by CT at MO interfaces was found to be responsible for the spontaneous formation of novel classes of supramolecular structures. By selecting different metal substrates and by carefully modifying the molecular species through chemical synthesis, the CT was selectively inhibited or enabled. This strategy represents a new paradigm for predicting and controlling the molecular self-assembly at surfaces. Conversely, the appearance of specific molecular linkage patterns is used to reveal the occurrence of CT and provides a novel means for obtaining crucial information on the electronic properties and the energy level alignment of MO interfaces

    A long-range ordered array of copper tetrameric units embedded in an on-surface metal organic framework

    Get PDF
    We report on the assembly of a highly ordered array of copper tetrameric clusters, coordinated into a metal-organic network. The ordered cluster array has been achieved by the deposition of tetrahydroxyquinone molecules on the Cu(111) surface at room temperature, and subsequent thermally activated dehydrogenation with the formation of tetraoxyquinone tetra-anions with a 4 x 4 periodicity. The supramolecular organic network acts as a spacer for the highly ordered two-dimensional network of copper tetramers at the very surface

    Graphene nanoribbons synthesized from molecular precursor polymerization on Au(110)

    No full text
    A spectroscopic study of 10,10-dibromo-9,9 bianthracene (DBBA) molecules deposited on the Au(110) surface is presented, by means of ultraviolet and X-ray photoemission, and X-ray absorption spectroscopy. Through a thermally activated procedure, these molecular precursors polymerize and eventually form graphene nanoribbons (GNRs) with atomically controlled shape and width, very important building blocks for several technological applications. The GNRs observed by scanning tunneling microscopy (STM) appear as short segments on top of the gold surface reconstruction, pointing out the delicate balance among surface diffusion and surface corrugation in their synthesis on the Au(110) surface

    Data for Two-dimensional ketone-driven metal–organic coordination on Cu(111)

    No full text
    Two-dimensional metal-organic nanostructures based on the binding of ketone groups and metal atoms were fabricated by depositing pyrene-4,5,9,10-tetraone (PTO) molecules on a Cu(111) surface. The strongly electronegative ketone moieties bind to either copper adatoms from the substrate or co-deposited iron atoms. In the former case, scanning tunnelling microscopy images reveal the development of an extended metal-organic supramolecular structure. Each copper adatom coordinates two ketone ligands of two neighbouring PTO molecules, forming chains that are linked together into large islands via secondary van der Waals interactions. Deposition of iron atoms leads to a transformation of this assembly resulting from the substitution of the metal centres. Density functional theory calculations reveal that the driving force for the metal substitution is primarily determined by the strength of the ketone-metal bond, which is higher for Fe compared to Cu. This second class of nanostructures displays a structural dependence on the rate of iron deposition
    corecore