An accumulation of climatic stress events has led to years of reduced growth for sugar maple in southern Quebec, Canada

Understanding the influence of climatic variation on forest dynamics is of great ecological and economic interest, and is essential to prescribe silvicultural interventions that will facilitate ecosystem acclimation to global change. However, the retrospective identification of climatic events responsible for the inter-annual variation of tree growth is challenging, notably because both their duration and their subsequent effects can be highly variable in time. In this study, we aimed to (1) quantify empirically the effect of climatic stress events on the short- and long-term growth dynamics of sugar maple trees; (2) compare the effects of different types of climatic events, that is, drought and thaw–freeze; and (3) compare the effects of climatic stress events to those of traditional monthly level climate metrics. To achieve this, we paired cross-dated tree-ring series to monthly and daily-level climate metrics over more than 50 yr in two distinct regions of southern Quebec. While the analysis from monthly level metrics first suggested a weak and non-stationary relationship between climatic conditions and tree growth, the analysis from daily-level metrics showed that climatic stress events, and more particularly thaw–freeze events, were strongly related to the growth of sugar maple trees. Our results suggest that the synergic influence of cumulative climatic stress events, which was exacerbated by insect outbreaks during the early 1980s, induced an important shift in the growth dynamics of sugar maple and in its response to variation in climatic conditions. These results highlight the potential negative impact of global climate change on our capacity to predict stand productivity accurately, especially if climate-sensitive growth models are based on projections of future monthly metrics. Because adverse climatic events are expected to increase both in frequency and in severity over the next decades, a general decrease in the growth rate of sugar maple is apprehended in southern Quebec

Primary and secondary branch growth in black spruce and balsam fir after Careful Logging around small Merchantable Stems (CLASS).

Careful logging around small merchantable stems (CLASS) is a partial cutting treatment that consists of the harvest of 70%–90% of the merchantable volume of an irregular coniferous stand. In this treatment, regeneration, saplings and small merchantable stems (DBH < 15 cm) are preserved and can continue to grow and develop into the dominant layer of the new stand. The aim of this project was to examine the effects of CLASS on the primary and secondary growth of branches, as well as on branch diameter in black spruce and balsam fir trees in the boreal forest of Quebec, Canada. Primary and secondary growth were measured on five branches per tree while branch diameter was analysed from 15 whorls distributed within the crown of the 48 black spruce and 48 balsam fir trees sampled. Branch primary and secondary growth significantly increased after CLASS in the lower part of the crown in both species, and both types of growth increased proportionally. These findings suggest that CLASS may delay crown recession as the lower branches tend to survive and grow for a longer period. However, although radial growth increased in the years post-CLASS, this did not significantly influence the final branch diameter and should not lead to lumber downgrade

Classification of high-voltage power line structures in low density ALS data acquired over broad non-urban areas

Airborne laser scanning (ALS) has gained importance over recent decades for multiple uses related to the cartography of landscapes. Processing ALS data over large areas for forest resource estimation and ecological assessments requires efficient algorithms to filter out some points from the raw data and remove human-made structures that would otherwise be mistaken for natural objects. In this paper, we describe an algorithm developed for the segmentation and cleaning of electrical network facilities in low density (2.5 to 13 points/m2) ALS point clouds. The algorithm was designed to identify transmission towers, conductor wires and earth wires from high-voltage power lines in natural landscapes. The method is based on two priors i.e. (1) the availability of a map of the high-voltage power lines across the area of interest and (2) knowledge of the type of transmission towers that hold the conductors along a given power line. It was tested on a network totalling 200 km of wires supported by 415 transmission towers with diverse topographies and topologies with an accuracy of 98.6%. This work will help further the automated detection capacity of power line structures, which had previously been limited to high density point clouds in small, urbanised areas. The method is open-source and available online

Using a standing-tree acoustic tool to identify forest stands for the production of mechanically-graded lumber.

This study investigates how the use of a Hitman ST300 acoustic sensor can help identify the best forest stands to be used as supply sources for the production of Machine Stress-Rated (MSR) lumber. Using two piezoelectric sensors, the ST300 measures the velocity of a mechanical wave induced in a standing tree. Measurements were made on 333 black spruce (Picea mariana (Mill.) BSP) trees from the North Shore region, Quebec (Canada) selected across a range of locations and along a chronosequence of elapsed time since the last fire (TSF). Logs were cut from a subsample of 39 trees, and sawn into 77 pieces of 38 mm × 89 mm cross-section before undergoing mechanical testing according to ASTM standard D-4761. A linear regression model was developed to predict the static modulus of elasticity of lumber using tree acoustic velocity and stem diameter at 1.3 m above ground level (R2 = 0.41). Results suggest that, at a regional level, 92% of the black spruce trees meet the requirements of MSR grade 1650Fb-1.5E, whilst 64% and 34% meet the 2100Fb-1.8E and 2400Fb-2.0E, respectively. Mature stands with a TSF < 150 years had 11 and 18% more boards in the latter two categories, respectively, and therefore represented the best supply source for MSR lumber

Wood density-climate relationships are mediated by dominance class in black spruce (Picea mariana (Mill.) BSP)

The relationships between climate and wood density components, i.e., minimum ring density, maximum ring density and mean ring density have been studied mainly in dominant trees. However, the applicability of the findings to trees of other dominance classes is unclear. The aim of this study was to address whether climate differentially influences wood density components among dominance classes. X-ray densitometry data was obtained from 72 black spruce (Picea mariana (Mill.) B.S.P.) trees harvested in Northwestern Ontario, Canada. Dominant, co-dominant and intermediate trees were sampled and the data analysed using mixed-effect modelling techniques. For each density component, models were first fitted to the pooled data using ring width and cambial age as predictors, before monthly climatic variables were integrated into the models. Then, separate models were fitted to the data from each dominance class. In general, the addition of climatic factors led to a small but significant improvement in model performance. The predicted historical trends were well synchronized with the observed data. Our results indicate that trees from all dominance classes in a stand should be sampled in order to fully characterize wood density-climate relationships

Impacts of climatic variation on the growth of black spruce across the forest-tundra ecotone : positive effects of warm growing seasons and heat waves are offset by late spring frosts

Climate strongly limits the physiological processes of trees near their range limits, leading to increased growth sensitivity. Northeastern North America is experiencing considerable warming, so the growth of trees near the northern treeline represents a key indicator of forest responses to climate change. However, tree-ring series and corresponding climatic data are scarce across the forest-tundra ecotone when compared to southern boreal regions, resulting in fewer studies on growth-climate relationships focused on this ecotone. Using daily climatic data, we identified trends in growing season heat accumulation and the intensity of acute climatic events over the last several decades in the southern and the northern parts of the forest-tundra ecotone in northeastern North America, and investigated their influence on black spruce radial growth. We found that black spruce trees responded positively to the increase in growing season temperatures and heat wave intensity, suggesting that growth is currently limited by suboptimal temperatures. While tree growth in the southern region generally benefited from warm spring temperatures, vulnerability to late spring frosts reduced tree growth in the northern region and increased probability of abrupt growth decline. In this region, late spring frosts offset approximately half of the additional growth that would otherwise occur over the course of a warm growing season. This vulnerability of northern trees may result from local adaptations to short growing seasons, which initiate biological activities at colder temperatures in the spring. Overall, our results highlight the need to explicitly incorporate acute climatic events into modeling efforts in order to refine our understanding of the impact of climate change on forest dynamics

Broad-scale wood degradation dynamics in the face of climate change : a meta-analysis

In the context of global change, a better understanding of the dynamics of wood degradation, and how they relate to tree attributes and climatic conditions, is necessary to improve broad-scale assessments of the contributions of deadwood to various ecological processes, and ultimately, for the development of adaptive post-disturbance management strategies. The objective of this meta-analysis was to review the effects of tree attributes and local climatic conditions on the time since death of coarse woody debris ranging in decomposition states. Results from our meta-analysis showed that projected warming will likely accelerate wood decomposition and significantly decrease the residence time in decay stages. By promoting such a decrease in residence time, further climate warming is very likely to alter the dynamics of deadwood, which in turn may affect saproxylic biodiversity by decreasing the temporal availability of specific habitats. Moreover, while coarse woody debris has been recognized as a key resource for bioenergy at the global scale, the acceleration of decay-stages transition dynamics indicates that the temporal window during which dead trees are available as feedstock for value-added products will shrink. Consequently, future planning and implementation of salvage harvesting will need to occur within a short period following disturbance, especially in warmer regions dominated by hardwood species. Another important contribution of this work was the development of a harmonized classification system that relies on the correspondence between the visual criteria used to characterize deadwood decomposition stages in locally developed systems the literature. This system could be used in future investigations to facilitate direct comparisons between studies. Our literature survey also highlights that most of the information on wood decay dynamics comes from temperate and boreal forests, whereas data from subtropical, equatorial and subarctic forests are scarce. Such data are urgently needed to allow broader-scale conclusions on global wood degradation dynamics

Correction, update, and enhancement of vectorial forestry road maps using ALS data, a pathfinder, and seven metrics

Accurate information about forestry roads is a key aspect of forest management in terms of economy (e.g. accessibility, cost, optimal path) and ecology (e.g. wildfire and wildlife protection). In Canada, and in fact, globally, most provincial, state or territory governments maintain vectorial information on the forestry roads under their jurisdiction. However, official maps are not always accurate, may lack road attributes of interest and are not always up-to-date. Airborne Laser Scanning (ALS) has become an established technology to accurately characterize and map broad territories by providing high density 3D point-clouds with, at least, 3 or 4 measurements per square meter. This paper addresses the problem of the automatic updating, fixing, and enhancement of vectorial forestry road maps over large landscapes (¿10000 km2). For this purpose, we developed a production ready, documented and open-source software. From metrics derived from the point-cloud the method produces a raster of road probability. It then uses an existing, inaccurate, map of the road network to define approximate start and end points for each road. Then, a pathfinder retrieves the accurate road shape by computing the least cost path between the two points on the probability raster. Using the accurate road position given by the algorithm, road width and road state are then estimated based the on characteristics of the point-cloud. We demonstrate that our algorithm retrieves the centrelines of roads in a natively vectorial form with an error below 3 m in 95% of the roads using a fully automatic method. The accuracy of the road location allows us to derive other accurate measurements, including the state of the roads

Opportunities and limitations of thinning to increase resistance and resilience of trees and forests to global change

We reviewed recent literature to identify the positive and negative effects of thinning on both stand- and tree-level resistance and resilience to four stressors that are expected to increase in frequency and/or severity due to global change: (1) drought, (2) fire, (3) insects and pathogens, and (4) wind. There is strong evidence that thinning, particularly heavy thinning, reduces the impact of drought and also the risk and severity of fire when harvest slash is burned or removed. Thinning also increases the growth and vigor of residual trees, making them less susceptible to eruptive insects and pathogens, while targeted removal of host species, susceptible individuals and infected trees can slow the spread of outbreaks. However, the evidence that thinning has consistent positive effects is limited to a few insects and pathogens, and negative effects on root rot infection severity were also reported. At this point, our review reveals insufficient evidence from rigorous experiments to draw general conclusions. Although thinning initially increases the risk of windthrow, there is good evidence that thinning young stands reduces the long-term risk by promoting the development of structural roots and favouring the acclimation of trees to high wind loads. While our review suggests that thinning should not be promoted as a tool that will universally increase the resistance and resilience of forests, current evidence suggests that thinning could still be an effective tool to reduce forest vulnerability to several stressors, creating a window of opportunity to implement longer term adaptive management strategies such as assisted migration. We highlight knowledge gaps that should be targeted by future research to assess the potential contribution of thinning to adaptive forest management. One of these gaps is that studies from boreal and tropical regions are drastically underrepresented, with almost no studies conducted in Asia and the southern hemisphere. Empirical evidence from these regions is urgently needed to allow broader-scale conclusions

Unraveling the Stratification of an Iron-Oxidizing Microbial Mat by Metatranscriptomics

International audienceA metatranscriptomic approach was used to study community gene expression in a naturally occurring iron-rich microbial mat. Total microbial community RNA was reversely transcribed and sequenced by pyrosequencing. Characterization of expressed gene sequences provided accurate and detailed information of the composition of the transcriptionally active community and revealed phylogenetic and functional stratifications within the mat. Comparison of 16S rRNA reads and delineation of OTUs showed significantly lower values of metatranscriptomic-based richness and diversity in the upper parts of the mat than in the deeper regions. Taxonomic affiliation of rRNA sequences and mRNA genome recruitments indicated that iron-oxidizing bacteria affiliated to the genus Leptothrix, dominated the community in the upper layers of the mat. Surprisingly, type I methanotrophs contributed to the majority of the sequences in the deep layers of the mat. Analysis of mRNA expression patterns showed that genes encoding the three subunits of the particulate methane monooxygenase (pmoCAB) were the most highly expressed in our dataset. These results provide strong hints that iron-oxidation and methane-oxidation occur simultaneously in microbial mats and that both groups of microorganisms are major players in the functioning of this ecosystem