Metodología de selección de especies de arbolado para el sombreado urbano en la parte oriental de la cornisa Cantábrica

The mitigation of the Urban Heat Island is one of the biggest future challenges in cities due to climate change. One of the methods to achieve the cooling of urban spaces is the attenuation of solar radiation provided by the trees. In the present article, a methodology of selection of arboreal species is proposed for the improvement of thermal comfort in urbanized areas of the eastern part of the Cantabrian coast. Starting from a pre-selection of native species, a classification of various species suitable for shading is obtained, describing its main characteristics and its possible use scope according to the typology of urban space.La mitigación del efecto Isla de Calor es uno de los mayores retos del futuro en las ciudades debido al cambio climático. Uno de los métodos para conseguir el enfriamiento de los espacios urbanos es la atenuación de radiación solar proporcionada por el arbolado. En el presente artículo se plantea una metodología de selección de especies arbóreas para la mejora del confort térmico en zonas urbanizadas de la parte oriental de la cornisa cantábrica. Partiendo de una preselección de especies autóctonas, se obtiene una clasificación de diversas especies aptas para el sombreado describiéndose sus principales características y su posible ámbito de utilización en función de la tipología de espacio urbano

Multicentre observational study on multisystem inflammatory syndrome related to COVID-19 in Argentina

Background: The impact of the pediatric inflammatory multisystem syndrome temporally associated with SARS-CoV-2 (PIMS-TS) in low- and middle-income countries remains poorly understood. Our aim was to understand the characteristics and outcomes of PIMS-TS in Argentina. Methods: This observational, prospective, and retrospective multicenter study enrolled patients younger than 18 years-old manifesting PIMS-TS, Kawasaki disease (KD) or Kawasaki shock syndrome (KSS) between March 2020 and May 2021. Patients were followed-up until hospital discharge or death (one case). The primary outcome was pediatric intensive care unit (PICU) admission. Multiple logistic regression was used to identify variables predicting PICU admission. Results: Eighty-one percent, 82%, and 14% of the 176 enrolled patients fulfilled the suspect case criteria for PIMS-TS, KD, and KSS, respectively. Temporal association with SARS-CoV-2 was confirmed in 85% of the patients and 38% were admitted to the PICU. The more common clinical manifestations were fever, abdominal pain, rash, and conjunctival injection. Lymphopenia was more common among PICU-admitted patients (87% vs. 51%, p < 0.0001), who also showed a lower platelet count and higher plasmatic levels of inflammatory and cardiac markers. Mitral valve insufficiency, left ventricular wall motion alterations, pericardial effusion, and coronary artery alterations were observed in 30%, 30%, 19.8%, and 18.6% of the patients, respectively. Days to initiation of treatment, rash, lymphopenia, and low platelet count were significant independent contributions to PICU admission. Conclusion: Rates of severe outcomes of PIMS-TS in the present study agreed with those observed in high-income countries. Together with other published studies, this work helps clinicians to better understand this novel clinical entity.Fil: Vainstein, Eduardo. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Baleani, Silvia. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Urrutia, Luis. Gobierno de la Ciudad de Buenos Aires. Hospital de Pediatría "Juan P. Garrahan"; ArgentinaFil: Affranchino, Nicolás. Gobierno de la Ciudad de Buenos Aires. Hospital de Pediatría "Juan P. Garrahan"; ArgentinaFil: Ackerman, Judith. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños Pedro Elizalde (ex Casa Cuna); ArgentinaFil: Cazalas, Mariana. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Goldsman, Alejandro. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Sardella, Angela. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Tolin, Ana Laura. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Goldaracena, Pablo. Provincia de Buenos Aires. Ministerio de Salud. Hospital de Niños "Sor María Ludovica" de La Plata; ArgentinaFil: Fabi, Mariana. Provincia de Buenos Aires. Ministerio de Salud. Hospital de Niños "Sor María Ludovica" de La Plata; ArgentinaFil: Cosentino, Mariana. Hospital Británico de Buenos Aires; ArgentinaFil: Magliola, Ricardo. Hospital Británico de Buenos Aires; ArgentinaFil: Roggiero, Gustavo. Provincia de Buenos Aires. Ministerio de Salud. Hospital Alta Complejidad en Red El Cruce Dr. Néstor Carlos Kirchner Samic; ArgentinaFil: Manso, Paula. Provincia de Buenos Aires. Ministerio de Salud. Hospital Alta Complejidad en Red El Cruce Dr. Néstor Carlos Kirchner Samic; ArgentinaFil: Triguy, Jésica. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Ballester, Celeste. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Cervetto, Vanesa. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños Pedro Elizalde (ex Casa Cuna); ArgentinaFil: Vaccarello, María. Sanatorio de la Trinidad; ArgentinaFil: De Carli, Domingo Norberto. Clínica del Niño de Quilmes; ArgentinaFil: De Carli, Maria Estela. Clínica del Niño de Quilmes; ArgentinaFil: Ciotti, Ana Laura. Hospital Nacional Profesor Alejandro Posadas; ArgentinaFil: Sicurello, María Irene. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Rios Leiva, Cecilia. Provincia de Buenos Aires. Ministerio de Salud. Hospital Interzonal de Agudos "Eva Perón"; ArgentinaFil: Villalba, Claudia. Gobierno de la Ciudad de Buenos Aires. Hospital de Pediatría "Juan P. Garrahan"; ArgentinaFil: Hortas, María. Sanatorio de la Trinidad; ArgentinaFil: Peña, Sonia. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: González, Gabriela. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Zold, Camila Lidia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Fisiología y Biofísica Bernardo Houssay. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Fisiología y Biofísica Bernardo Houssay; ArgentinaFil: Murer, Mario Gustavo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Fisiología y Biofísica Bernardo Houssay. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Fisiología y Biofísica Bernardo Houssay; ArgentinaFil: Grippo, M.. No especifíca;Fil: Vázquez, H.. No especifíca;Fil: Morós, C.. No especifíca;Fil: Di Santo, M.. No especifíca;Fil: Villa, A.. No especifíca;Fil: Lazota, P.. No especifíca;Fil: Foti, M.. No especifíca;Fil: Napoli, N.. No especifíca;Fil: Katsikas, M. M.. No especifíca;Fil: Tonello, L.. No especifíca;Fil: Peña, J.. No especifíca;Fil: Etcheverry, M.. No especifíca;Fil: Iglesias, D.. No especifíca;Fil: Alcalde, A. L.. No especifíca;Fil: Bruera, M.J.. No especifíca;Fil: Bruzzo, V.. No especifíca;Fil: Giordano, P.. No especifíca;Fil: Pena Acero, F.. No especifíca;Fil: Netri Pelandi, G.. No especifíca;Fil: Pastaro, D.. No especifíca;Fil: Bleiz, J.. No especifíca;Fil: Rodríguez, M. F.. No especifíca;Fil: Laghezza, L.. No especifíca;Fil: Molina, M. B.. No especifíca;Fil: Patynok, N.. No especifíca;Fil: Chatelain, M. S.. No especifíca;Fil: Aguilar, M. J.. No especifíca;Fil: Gamboa, J.. No especifíca;Fil: Cervan, M.. No especifíca;Fil: Ruggeri, A.. No especifíca;Fil: Marinelli, I.. No especifíca;Fil: Checcacci, E.. No especifíca;Fil: Meregalli, C.. No especifíca;Fil: Damksy Barbosa, J.. No especifíca;Fil: Fernie, L.. No especifíca;Fil: Fernández, M. J.. No especifíca;Fil: Saenz Tejeira, M.M.. No especifíca;Fil: Cereigido, C.. No especifíca;Fil: Nunell, A.. No especifíca;Fil: Villar, D.. No especifíca;Fil: Mansilla, A. D.. No especifíca;Fil: Darduin, M. D.. No especifíca

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged).Comment: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editin

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory. Athena is a versatile observatory designed to address the Hot and Energetic Universe science theme, as selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), X-IFU aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over a hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR (i.e. in the course of its preliminary definition phase, so-called B1), browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters, such as the instrument efficiency, spectral resolution, energy scale knowledge, count rate capability, non X-ray background and target of opportunity efficiency. Finally, we briefly discuss the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, touch on communication and outreach activities, the consortium organisation and the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with ESA member state contributions from Belgium, Czech Republic, Finland, Germany, Poland, Spain, Switzerland, with additional contributions from the United States and Japan.The French contribution to X-IFU is funded by CNES, CNRS and CEA. This work has been also supported by ASI (Italian Space Agency) through the Contract 2019-27-HH.0, and by the ESA (European Space Agency) Core Technology Program (CTP) Contract No. 4000114932/15/NL/BW and the AREMBES - ESA CTP No.4000116655/16/NL/BW. This publication is part of grant RTI2018-096686-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This publication is part of grant RTI2018-096686-B-C21 and PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033

Methodology of selection of tree species for urban shading in the eastern part of the Cantabrian coast

The mitigation of the Urban Heat Island is one of the biggest future challenges in cities due to climate change. One of the methods to achieve the cooling of urban spaces is the attenuation of solar radiation provided by the trees. In the present article, a methodology of selection of arboreal species is proposed for the improvement of thermal comfort in urbanized areas of the eastern part of the Cantabrian coast. Starting from a pre-selection of native species, a classification of various species suitable for shading is obtained, describing its main characteristics and its possible use scope according to the typology of urban space

Procedimiento de fabricación de capas de carburo de silicio (SIC) mediante implantación de carbono y recocidos.

Fecha de solicitud: 30.03.2001.- Titulares: Consejo Superior de Investigaciones Científicas (CSIC).- Universidad de Barcelona.[EN]The invention relates to the use of a combination of ionic implantations of C and conventional anneals to produce complex SiC-based multilayer structures. This combination of techniques, which is well known in Si technology, provides great versatility in the structure of the synthesized layers (amorphous, polycrystalline or crystalline structure with crystalline orientation control; multilayers, buried layers or layers on insulating material) and makes it possible to obtain layers with very low levels of residual stress and with surfaces and interfaces having very low roughness, which characterized by the absence of cavities (unlike other techniques such as CVD or MBE), the latter features being extremely important for viability and reliability of synthesized multilayer structures in various applications, for instance, in MicroElectroMechanical (MEMS) devices. [ES]La invención se refiere al uso de una combinación de implantes iónica de C y recuece convencional para producir estructuras complejas de múltiples capas de SiC basado. Esta combinación de técnicas, que es bien conocido en la tecnología del silicio, ofrece una gran versatilidad en la estructura de las capas sintetizadas (estructura amorfa, policristalina o cristalino con el control de la orientación cristalina; multicapas, capas enterrados o capas de materiales aislantes) y permite obtener capas con niveles muy bajos de la tensión residual y con superficies e interfaces con la rugosidad muy baja, que se caracteriza por la ausencia de cavidades (a diferencia de otras técnicas, tales como enfermedades cardiovasculares o MBE), las características de este último muy importante para la viabilidad y fiabilidad de la síntesis de múltiples capas estructuras en diversas aplicaciones, por ejemplo, en microelectromecánicos (MEMS).Peer reviewe

Anisotropic etch-stop properties of nitrogen implanted silicon

Trabajo presentado en Eurosensors VII, celebrado en Budapest (Hungría), del 26 al 29 de septiembre de 199

Structural Characterization of Ion Beam Synthesysed Polycristalline SiC on SiO2

Trabajo presentado en el 3rd International Conference on Materials for Microelectronics, celebrado en Dublín (Irlanda), los días 16 y 17 de octubre de 200

Epitaxial growth of β-SiC on ion-beam synthesized β-SiC: Structural characterization

Trabajo presentado en el ICSCRM '99: The International Conference on Silicon Carbide and Related Materials, celebrado en Raleigh-Cary, Carolina del Norte (Estados Unidos), del 10 al 15 de octubre de 1999In this work we present for the first time, to our knowledge, the CVD epitaxial growth of β-SiC using an ion beam synthesized (IBS) β-SiC layer as seed, which has been formed by multiple implantation into Si wafers at 500 °C. The ion beam synthesized continuous layer is constituted by β-SiC nanocrystals that are well oriented relative to the silicon substrate. Comparison of the epitaxial growth on these samples with that on silicon test samples, both on and off-axis, is performed. The results show that the epitaxial growth can be achieved on the IBS samples without the need of the carbonization step and that the structural quality of the CVD layer is comparable to that obtained on a carbonized silicon sample. Improvement of the quality of the deposited layer is proposed

Analysis of buried etch-stop layers in silicon by nitrogen-ion implantation

The analysis of the etch-stop properties of layers obtained by substoichiometric nitrogen-ion implantation and annealing in silicon has been performed as a function of the implantation conditions. The analysis of the etching efficiency has been tested in TMAH-IPA systems. The results obtained show the need to implant at doses higher than 2×!017cmMIN2 to obtain etch-stop layers stable under high-temperatures annealing. So, for implantation doses of 5 × 1017cmMIN2, layers stand unetched for times longer than 2 h. The preliminary structural analysis of the samples suggests the presence of an amorphous silicon nitride layer for higher implantation doses