Resistência à fratura e padrão de falha de dentes submetidos ao clareamento interno com peróxido de carbamida a 37%, com aplicação de diferentes procedimentos restauradores

OBJECTIVE: This study investigated the compressive fracture strength and failure pattern in premolars submitted to endodontic treatment and internal bleaching with 37% carbamide peroxide for 21 days, with application of different restorative procedures. MATERIAL AND METHODS: Six groups were employed (n = 10): 1) non-bleached teeth and pulp chamber sealed with IRM; 2) bleached teeth and pulp chamber sealed with IRM; 3) bleached teeth and pulp chamber filled with light cured composite resin; 4) bleached teeth, root canals prepared at 10mm, filling of the root canal and pulp chamber with IRM; 5) bleached teeth, root canals prepared at 10mm, luting of prefabricated metallic post with zinc phosphate and pulp chamber sealed with composite resin; 6) bleached teeth, root canals prepared at 10mm, luting of glass fiber post with resin cement and pulp chamber sealed with composite resin. After 24-hour storage in distilled water, the specimens were submitted to compressive fracture strength testing in a universal testing machine. RESULTS: The following values were found: Group 1 - 56.23kgf; Group 2 - 48.96kgf; Group 3 - 53.99kgf; Group 4 - 45.72kgf; Group 5 - 54.22kgf; Group 6 - 60.12kgf. The analysis of variance did not reveal statistically significant difference between groups (pOBJETIVO: O objetivo do estudo foi investigar a resistência à fratura sob compressão e padrão de falha de pré-molares tratados endodonticamente e clareados internamente por 21 dias com peróxido de carbamida a 37%, aplicando-se diferentes procedimentos restauradores. MATERIAL E MÉTODOS: O objetivo deste estudo foi investigar a resistência à fratura sob compressão e padrão de falha de pré-molares unirradiculares tratados endodonticamente e clareados internamente com peróxido de carbamida a 37%. Foram constituídos 6 grupos (n = 10): 1) dentes sem clareamento e câmara pulpar vedada com IRM; 2) dentes clareados e câmara pulpar vedada com IRM; 3) dentes clareados e câmara pulpar preenchida com resina composta fotopolimerizável; 4) dentes clareados, condutos preparados com 10mm, e preenchimento do conduto e câmara pulpar com IRM; 5) dentes clareados, condutos preparados com 10mm, cimentação de pino metálico pré-fabricado com fosfato de zinco e câmara pulpar vedada com resina composta; 6) dentes clareados, condutos preparados com 10mm, cimentação de pino de fibra de vidro com cimento resinoso e câmara pulpar vedada com resina composta. Após 24 horas de armazenamento em água destilada, os espécimes foram submetidos ao teste de resistência à fratura sob compressão em máquina de ensaios universal. RESULTADOS: Os seguintes valores foram encontrados: grupo 1 - 56,23kgf; grupo 2 - 48,96kgf; grupo 3 - 53,99kgf; grupo 4 - 45,72kgf; grupo 5 - 54,22kgf; grupo 6 - 60,12kgf. A Análise de Variância não mostrou diferença estatisticamente significante entre os grupos (p < .05), sugerindo que o clareamento interno com peróxido de carbamida a 37% não enfraqueceu os tecidos dentais. O maior número de fraturas desfavoráveis foi encontrado nos grupos 2 (50%), 4 (40%), e 5 (30%). O grupo 6 exibiu o padrão de falhas mais favorável. CONCLUSÃO: Os resultados sugerem que o clareamento interno com peróxido de carbamida a 37% não causou enfraquecimento importante dos dentes. Entre os dentes clareados, aqueles com restaurações temporárias de IRM ou com pinos metálicos mostraram o padrão mais desfavorável de fratura, enquanto o padrão de fratura mais favorável ocorreu em dentes restaurados com resina composta e pinos de fibras de vidro

Influence of low concentration acid treatment on lithium disilicate core/veneer ceramic bond strength

Objective: This study evaluated the influence of low concentration acid treatment on the shear bond strength between lithium disilicate (LD) infrastructure and veneering porcelain. The surface morphology characteristic after this acid treatment was also examined. Study Design: LD reinforced ceramic cylinders (n=10) (IPS e.max Press, Ivoclar-Vivadent, Schaan, Liechtens) were treated (LD-treated) with a low concentration acid solution (Invex Liquid-Ivoclar-Vivadent, Schaan, Liechtenstein) or not treated with the acid solution (LD-untreated). They were veneered with a glass ceramic (IPS e.max Ceram, Ivoclar-Vivadent, Schaan, Liechtenstein). A metal ceramic group (CoCr) was tested as control. Shear bond strength (SBS) was conducted using a universal testing machine at 0.5 mm/min. Surface morphology characteristics after acid treatment were analyzed using scanning electron microscopy . Results: The acid treatment at low concentrations did not influence the SBS of the LD/veneering porcelain interface. The CoCr group showed the significant higher SBS value (35.59 ± 5.97 MPa), followed by LD-untreated group (27.76 ± 3.59 MPa) and LD-treated (27.02 ± 4.79 MPa). The fracture modes were predominantly adhesive for CoCr group and cohesive within the infrastructure for DL groups. Scanning Electron Microscopy (SEM) analysis showed no morphological differences between treated and untreated LD surfaces. Conclusions: Low concentration acid treatment did not improved SBS of veneering ceramic to LD and did not cause morphological changes on the LD surface

Influence of intraradicular post and crown ferrule on the fracture strength of endodontically treated teeth

The aim of this study was to investigate the fracture strength of endodontically treated teeth restored with different posts and variable ferrule heights. Sixty freshly extracted human canines were treated endodontically and randomly assigned to 6 groups (n=10), being restored with custom-made cast post-and-core (CP0 and CP3 groups), prefabricated post and composite resin core (PF0 and PF3 groups), and composite resin (CR0 and CR3 groups). The CP0, PF0 and CR0 groups presented no ferrule and the CP3, PF3 and CR3 presented 3 mm of coronal structure. All teeth were restored with full metal crowns. The fracture strength was measured in a universal testing machine at 45o to the long axis of the tooth until failure. Data were analyzed statistically by 2-way ANOVA and Tukey's test (?=0.05). When the mean fracture strength values were compared (CP0 group - 820.20 N, CP3 group - 1179.12 N; PF0 group - 561.05 N; PF3 group - 906.79 N; CR0 group - 297.84 N; and CR3 group - 1135.15 N) there was statistically significant among the groups (p<0.05), except for the three groups with 3 mm of coronal remaining, which were similar to each other. The results of this study showed that the ferrule in crowns promoted significantly higher fracture strength in the endodontically treated teeth.O objetivo neste estudo foi avaliar a resistência à fratura de dentes tratados endodonticamente restaurados com diferentes pinos e diferentes alturas de remanescente dentinário da coroa. Sessenta caninos recém-extraídos foram tratados endodonticamente, separados em 6 grupos (n=10) e restaurados com núcleo metálico fundido (CP0 e CP3), pino pré-fabricado e núcleo em resina composta (PF0 e PF3) ou resina composta (CR0 e CR3). Os grupos CP0, PF0 e CR0 não possuíam férula e os grupos CP3, PF3 e CR3 apresentaram 3 mm de remanescente coronário. Todos os dentes foram restaurados com coroas totais metálicas. A resistência à fratura foi medida em máquina universal de ensaios com o longo eixo do dente posicionado a 45 graus em relação ao carregamento axial, até que ocorresse fratura. A análise de variância 2 critérios (?=0,05) mostrou diferença estatisticamente significativa entre os grupos. Quando as médias das forças para fratura foram comparadas (CP0 = 820,0 N; CP3= 1179,12 N; PF0 = 561,05 N; PF3 = 906,79 N; CR0 = 297,84 N; e CR3 = 1135,15 N) não foram observadas diferenças significativas entre os 3 grupos com 3 mm de remanescente coronal. Os resultados mostraram que a presença de férula em coroas aumenta significantemente a resistência à fratura de dentes tratados endodonticamente.Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES

Fracture resistance of weakened roots restored with composite resin and glass fiber post

This study evaluated the fracture resistance of weakened roots restored with glass fiber posts, composite resin cores and complete metal crowns. Thirty maxillary canines were randomly divided into 3 groups of 10 teeth each: teeth without weakened roots (control); teeth with partially weakened roots (PWR) and teeth with and largely weakened roots (LWR). The control group was restored with glass fiber posts and a composite resin core. Teeth in the PWR and LWR groups were flared internally to standardized dimensions in order to simulate root weakness. Thereafter, the roots were partially filled with composite resin and restored in the same way as in the control group. The specimens were exposed to 250,000 cycles in a controlled chewing simulator. All intact specimens were subjected to a static load (N) in a universal testing machine at 45 degrees to the long axis of the tooth until failure. Data were analyzed by one-way ANOVA and Dunnett's test for multiple comparisons (p=0.05). There were statistically significant difference differences (p<0.01) among the groups (control group = 566.73 N; PWR = 409.64 N; and LWR = 410.91 N), with significantly higher fracture strength for the control group. There was no statistically significant difference (p>0.05) between the weakened groups. The results of this study showed that thicker root dentin walls significantly increase the fracture resistance of endodontically treated teeth.Este estudo avaliou a resistência à fratura de raízes fragilizadas restauradas com pinos de fibra de vidro, núcleos de resina composta e coroas totais metálicas. Trinta caninos superiores foram aleatoriamente divididos em 3 grupos. Dentes sem enfraquecimento (grupo controle); grupo de raízes parcialmente enfraquecidas e amplamente enfraquecidas. O grupo controle foi restaurado com pinos de fibra de vidro e núcleo em resina composta. Os dentes dos grupos de raízes parcialmente e amplamente enfraquecidas foram internamente preparadas de maneira padronizada simulando enfraquecimento. Após isto, as raízes foram parcialmente preenchidas com resina composta e restauradas como no grupo controle. Os espécimes foram expostos a 250.000 ciclos em uma máquina de ciclagem mecânica. Todos os dentes intactos foram submetidos à carga estática (N) em uma máquina de ensaio universal a 45 graus ao longo eixo do dente até a sua falha. Os resultados foram analisados através do teste ANOVA a 1 critério e teste de Dunnett para comparações múltiplas (p=0,05). A análise estatística revelou diferenças significantes (p<0,01) entre os três grupos (grupo controle = 566,73 N; RPE = 409,64 N; e ERA = 410,91 N). Quando as três médias de resistência a fratura são ranqueadas as duas menores não se diferem. Os resultados deste estudo mostraram que uma maior espessura de paredes dentinárias aumenta significantemente a resistência à fratura de dentes tratados endodonticamente

Influence of thermal and mechanical fatigue on the shear bond strength of different all-ceramic systems

To evaluate the influence of thermal and mechanical fatigue on the shear bond strength of different all-ceramic cores and veneering porcelain interfaces. All-ceramic systems tested were lithium disilicate and zirconia veneered by layering technique. Sixty specimens (n=20) were subjected to shear bond strength. Ten of them were thermal and mechanical cycled. Fracture analysis was performed with stereomicroscopy and scanning electron microscopy. Energy dispersive X-ray spectroscopy analysis was performed across core/veneer interfaces. Thermal and mechanical cycling did not influence on bond strength. However, there was significant difference among systems (<0.01). CoCr group presented the highest values, followed by lithium disilicate, and zirconia. Failure modes were predominantly adhesive for CoCr, cohesive in core for lithium disilicate, and cohesive in veneer for zirconia. Energy dispersive X-ray showed interaction zone for CoCr and lithium disilicate groups and was inconclusive for zirconia. Fatigue had no influence on bond strength of groups tested. The results suggest that there is a chemical bond between core and veneer materials for CoCr and lithium disilicate groups

Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength

AbstractObjectivesThe purpose of this study was to evaluate the influence of thermal and mechanical cycling and veneering technique on the shear bond strength of Y-TZP (yttrium oxide partially stabilized tetragonal zirconia polycrystal) core–veneer interfaces.Materials and methodsCylindrical Y-TZP specimens were veneered either by layering (n=20) or by pressing technique (n=20). A metal ceramic group (CoCr) was used as control (n=20). Ten specimens for each group were thermal and mechanical cycled and then all samples were subjected to shear bond strength in a universal testing machine with a 0.5mm/min crosshead speed. Mean shear bond strength (MPa) was analysed with a 2-way analysis of variance and Tukey's test (p<0.05). Failure mode was determined using stereomicroscopy and scanning electron microscopy (SEM).ResultsThermal and mechanical cycling had no influence on the shear bond strength for all groups. The CoCr group presented the highest bond strength value (p<0.05) (34.72±7.05MPa). There was no significant difference between Y-TZP veneered by layering (22.46±2.08MPa) or pressing (23.58±2.1MPa) technique. Failure modes were predominantly adhesive for CoCr group, and cohesive within veneer for Y-TZP groups.ConclusionsThermal and mechanical cycling, as well as the veneering technique does not affect Y-TZP core–veneer bond strength.Clinical significanceDifferent methods of veneering Y-TZP restorations would not influence the clinical performance of the core/veneer interfaces