Factors Influencing the Concentration of Fecal Coliforms in Oysters in the River Blackwater Estuary, UK

Contamination of water systems can not only entail high risks to human health but can also result in economic losses due to closure of beaches and shellfish harvesting areas. Understanding the origin of fecal pollution at locations where shellfish are grown is essential in assessing associated health risks—as well as the determining actions necessary to remedy the problem. The aim of this work is to identify the species-specific source(s) of fecal contamination impacting waters overlying the shellfisheries in the Blackwater Estuary, East Anglia, UK. Over a twelve-month period, water samples were taken from above the oysters and from a variety of upstream points considered to be likely sources of fecal microorganism, together with oyster samples, and the number of fecal streptococci and E. coli were determined. Transition from low to high tide significantly decreased the concentration of fecal streptococci in waters overlying the oyster beds, indicative of a freshwater input of fecal pollution in oyster bed waters. In 12 months, the number of E. coli remained constant throughout, while fecal streptococci numbers were generally higher in the winter months. Analyses of upstream samples identified a sewage outfall to be the main source of E. coli to the oyster beds, with additional fecal streptococci from agricultural sources. The findings may assist in developing approaches for assessing the risks to shellfishery industries of various fecal inputs into an estuary, which could then help local governmental authorities address the problem

Father's occupational exposure to carcinogenic agents and childhood acute leukemia: a new method to assess exposure (a case-control study)

<p>Abstract</p> <p>Background</p> <p>Medical research has not been able to establish whether a father's occupational exposures are associated with the development of acute leukemia (AL) in their offspring. The studies conducted have weaknesses that have generated a misclassification of such exposure. Occupations and exposures to substances associated with childhood cancer are not very frequently encountered in the general population; thus, the reported risks are both inconsistent and inaccurate. In this study, to assess exposure we used a new method, an exposure index, which took into consideration the industrial branch, specific position, use of protective equipment, substances at work, degree of contact with such substances, and time of exposure. This index allowed us to obtain a grade, which permitted the identification of individuals according to their level of exposure to known or potentially carcinogenic agents that are not necessarily specifically identified as risk factors for leukemia. The aim of this study was to determine the association between a father's occupational exposure to carcinogenic agents and the presence of AL in their offspring.</p> <p>Methods</p> <p>From 1999 to 2000, a case-control study was performed with 193 children who reside in Mexico City and had been diagnosed with AL. The initial sample-size calculation was 150 children per group, assessed with an expected odds ratio (OR) of three and a minimum exposure frequency of 15.8%. These children were matched by age, sex, and institution with 193 pediatric surgical patients at secondary-care hospitals. A questionnaire was used to determine each child's background and the characteristics of the father's occupation(s). In order to determine the level of exposure to carcinogenic agents, a previously validated exposure index (occupational exposure index, OEI) was used. The consistency and validity of the index were assessed by a questionnaire comparison, the sensory recognition of the work area, and an expert's opinion.</p> <p>Results</p> <p>The adjusted ORs and 95% confidence intervals (CI) were 1.69 (0.98, 2.92) during the preconception period; 1.98 (1.13, 3.45) during the index pregnancy; 2.11 (1.17, 3.78) during breastfeeding period; 2.17 (1.28, 3.66) after birth; and 2.06 (1.24, 3.42) for global exposure.</p> <p>Conclusion</p> <p>This is the first study in which an OEI was used to assess a father's occupational exposure to carcinogenic agents as a risk factor for the development of childhood AL in his offspring. From our results, we conclude that children whose fathers have been exposed to a high level of carcinogenic agents seem to have a greater risk of developing acute leukemia. However, confounding factors cannot be disregarded due to an incomplete control for confounding.</p

A quantitative PCR approach for quantification of functional genes involved in the degradation of polycyclic aromatic hydrocarbons in contaminated soils

Polycyclic aromatic hydrocarbons (PAHs) are major pollutants globally and due to their carcinogenic and mutagenic properties their clean-up is paramount. Bioremediation or using PAH degrading microorganisms (mainly bacteria) to degrade the pollutants represents cheap, effective methods. These PAH degraders harbor functional genes which help microorganisms use PAHs as source of food and energy. Most probable number (MPN) and plate counting methods are widely used for counting PAHs degraders; however, as culture based methods only count a small fraction (<1%) of microorganisms capable of carrying out PAH degradation, the use of culture-independent methodologies is desirable.This protocol presents a robust, rapid and sensitive qPCR method for the quantification of the functional genes involved in the degradation of PAHs in soil samples.This protocol enables us to screen a vast number of PAH contaminated soil samples in few hours.This protocol provides valuable information about the natural attenuation potential of contaminated soil and can be used to monitor the bioremediation process. © 2016 The Authors. Published by Elsevier B.V

Analysis of the Microbiome (Bathing Biome) in Geothermal Waters from an Australian Balneotherapy Centre

Balneotherapy is an ancient practice which remains commonplace throughout the world due to perceived health benefits that include relief of arthritis, fibromyalgia and relaxation. However, bathing environments are not sterile and natural spring waters may harbour natural microbial populations that include potential pathogens. We elucidated the microbial community from water taken from the borehole, pre-filter water (chlorinated, cold and post-bathing water) and post-filter water at a commercial Australian natural hot spring bathing facility. Thiobacillus, Sphingobium and Agrobacterium were the predominant genera in samples collected from the borehole. The predominant genera changed to Sphingobium, Parvibaculum and Achromobacter following chloride treatment and Azospira replaced the Achromobacter once the water reached ambient temperature and was stored ready to be used by bathers. The microbial community changed again following use by bathers, dominated by Pseudomonas, although Sphingobium persisted. No total or faecal coliforms were observed in any of the samples except for the post-bathing water; even there, their presence was at very low concentration (2.3 cfu/mL). These results confirm the lack of pathogens present in these hot spring waters but also suggests that good management of post-bathing water is required especially if the water is used for borehole water recharge

A Review of Dry Sanitation Systems

Dry sanitation systems (waterless or composting toilets) have been used since the 1970s. Their use has received acceptance in rural regions of Europe and the United States. Some of the advantages of dry sanitation systems include their waterless nature, their low energy requirement and the creation of fertilizer as an added value product. Moreover, the use of such a system is a sustainable sanitation approach that may reduce the burden on infrastructure and provide sanitation to the 2.5 billion people worldwide who do not currently have access to it. The critical factors when choosing a dry sanitation system and their optimum parameters include aeration, moisture content (50%&ndash;60%), temperature (40&ndash;65 &deg;C), carbon to nitrogen ratio (25&ndash;35), pH (5.5&ndash;8.0) and porosity (35%&ndash;50%). The temperature&ndash;time criterion approach is the most common method used to evaluate the stability and safety of the compost as a fertilizer. The risks of handling the waste after 12 months of composting have been calculated as low. Here, we have reviewed and assessed the features of dry sanitation systems currently available, focusing on those designed for and operated in remote areas such as national parks and tourist destinations and, more importantly, in rural areas in developing countries or refugee shelters where water/sanitation may be scarce

Variation in the Structure and Composition of Bacterial Communities within Drinking Water Fountains in Melbourne, Australia

Modern drinking water distributions systems (DWDSs) have been designed to transport treated or untreated water safely to the consumer. DWDSs are complex environments where microorganisms are able to create their own niches within water, biofilm or sediment. This study was conducted on twelve drinking fountains (of three different types, namely types A, B and C) within the Melbourne (Australia) city area with the aim to (i) characterize the water quality and viable and total counts at each fountain, (ii) compare the differences in the structure and diversity of the bacterial community between bulk water and biofilm and (iii) determine differences between the bacterial communities based on fountain type. Samples of water and biofilm were assessed using both culture-dependent and culture-independent techniques. Heterotrophic plate counts of water samples ranged from 0.5 to 107.5 CFU mL−1, and as expected, total cell counts (cells mL−1) were, on average, 2.9 orders of magnitude higher. Based on the mean relative abundance of operational taxonomic units (OTUs), ANOSIM showed that the structure of the bacterial communities in drinking water and biofilm varied significantly (R = 0.58, p = 0.001). Additionally, ANOSIM showed that across fountain types (in water), the bacterial community was more diverse in fountain type C compared to type A (p p Sphingomonas (24.2%), while Methylobacterium had the highest mean relative abundance in biofilm samples (54.7%). At the level of genus and higher, significant differences in dominance were found across fountain types. In water, Solirubrobacterales (order) were present in type C fountains at a relative abundance of 17%, while the mean relative abundance of Sphingomonas sp. in type C fountains was less than half that in types A (25%) and B (43%). In biofilm, the relative abundance of Sphingomonas sp. was more than double in type A (10%) fountains compared to types B (4%) and C (5%), and Sandarakinorhabdus sp. were high in type A fountains (6%) and low in types B and C (1%). Overall this research showed that there were significant differences in the composition of bacterial communities in water and biofilm from the same site. Furthermore, significant variation exists between microbial communities present in the fountain types, which may be related to age. Long-established environments may lead to a greater chance of certain bacteria gaining abilities such as increased disinfection resistance. Variations between the structure of the bacterial community residing in water and biofilm and differences between fountain types show that it is essential to regularly test samples from individual locations to determine microbial quality

Variation in the Structure and Composition of Bacterial Communities within Drinking Water Fountains in Melbourne, Australia

Modern drinking water distributions systems (DWDSs) have been designed to transport treated or untreated water safely to the consumer. DWDSs are complex environments where microorganisms are able to create their own niches within water, biofilm or sediment. This study was conducted on twelve drinking fountains (of three different types, namely types A, B and C) within the Melbourne (Australia) city area with the aim to (i) characterize the water quality and viable and total counts at each fountain, (ii) compare the differences in the structure and diversity of the bacterial community between bulk water and biofilm and (iii) determine differences between the bacterial communities based on fountain type. Samples of water and biofilm were assessed using both culture-dependent and culture-independent techniques. Heterotrophic plate counts of water samples ranged from 0.5 to 107.5 CFU mL&minus;1, and as expected, total cell counts (cells mL&minus;1) were, on average, 2.9 orders of magnitude higher. Based on the mean relative abundance of operational taxonomic units (OTUs), ANOSIM showed that the structure of the bacterial communities in drinking water and biofilm varied significantly (R = 0.58, p = 0.001). Additionally, ANOSIM showed that across fountain types (in water), the bacterial community was more diverse in fountain type C compared to type A (p &lt; 0.001) and type B (p &lt; 0.001). 16S rRNA next-generation sequencing revealed that the bacterial communities in both water and biofilm were dominated by only seven phyla, with Proteobacteria accounting for 71.3% of reads in water and 68.9% in biofilm. The next most abundant phylum was Actinobacteria (10.4% water; 11.7% biofilm). In water, the genus with the highest overall mean relative abundance was Sphingomonas (24.2%), while Methylobacterium had the highest mean relative abundance in biofilm samples (54.7%). At the level of genus and higher, significant differences in dominance were found across fountain types. In water, Solirubrobacterales (order) were present in type C fountains at a relative abundance of 17%, while the mean relative abundance of Sphingomonas sp. in type C fountains was less than half that in types A (25%) and B (43%). In biofilm, the relative abundance of Sphingomonas sp. was more than double in type A (10%) fountains compared to types B (4%) and C (5%), and Sandarakinorhabdus sp. were high in type A fountains (6%) and low in types B and C (1%). Overall this research showed that there were significant differences in the composition of bacterial communities in water and biofilm from the same site. Furthermore, significant variation exists between microbial communities present in the fountain types, which may be related to age. Long-established environments may lead to a greater chance of certain bacteria gaining abilities such as increased disinfection resistance. Variations between the structure of the bacterial community residing in water and biofilm and differences between fountain types show that it is essential to regularly test samples from individual locations to determine microbial quality

Biostabilization of municipal solid waste fractions from an Advanced Waste Treatment plant

Controlling the safe disposal of Municipal Solid Waste (MSW), especially the biodegradable fraction, is an important goal of waste management. This study reports the effects of using composting to biostabilize the biodegradable fraction of MSW sourced from an Advanced Waste Treatment plant in Australia. The impact of biostabilization on the initial aerobic degradation of the material showed a reduction in oxygen consumption of 30% (230 g O2/kg loss of ignition (LOI)) in immature compost and 45% (181 g O2 kg−1 LOI) in mature compost when compared with the input material (330 g O2/kg LOI). Anaerobic tests showed a reduction in biodegradability of 40% in the immature compost with biogas production 250 L/kg LOI compared with 50% in mature compost with biogas production of 218 L/kg LOI. The results confirm that the biostabilization of the biodegradable fraction of MSW diverted from landfill can result in a significant reduction of greenhouse gas emission

Biomimetic Nanopillar Silicon Surfaces Rupture Fungal Spores

The mechano-bactericidal action of nanostructured surfaces is well-documented; however, synthetic nanostructured surfaces have not yet been explored for their antifungal properties toward filamentous fungal species. In this study, we developed a biomimetic nanostructured surface inspired by dragonfly wings. A high-aspect-ratio nanopillar topography was created on silicon (nano-Si) surfaces using inductively coupled plasma reactive ion etching (ICP RIE). To mimic the superhydrophobic nature of insect wings, the nano-Si was further functionalised with trichloro(1H,1H,2H,2H-perfluorooctyl)silane (PFTS). The viability of Aspergillus brasiliensis spores, in contact with either hydrophobic or hydrophilic nano-Si surfaces, was determined using a combination of standard microbiological assays, confocal laser scanning microscopy (CLSM), and focused ion beam scanning electron microscopy (FIB-SEM). Results indicated the breakdown of the fungal spore membrane upon contact with the hydrophilic nano-Si surfaces. By contrast, hydrophobised nano-Si surfaces prevented the initial attachment of the fungal conidia. Hydrophilic nano-Si surfaces exhibited both antifungal and fungicidal properties toward attached A. brasisiensis spores via a 4-fold reduction of attached spores and approximately 9-fold reduction of viable conidia from initial solution after 24 h compared to their planar Si counterparts. Thus, we reveal, for the first time, the physical rupturing of attaching fungal spores by biomimetic hydrophilic nanostructured surfaces

Are Sterols Useful for the Identification of Sources of Faecal Contamination in Shellfish? A Case Study.

This work aimed to identify the major source(s) of faecal pollution impacting Salcott Creek oyster fisheries in the UK through the examination of the sterol profiles. The concentration of the major sewage biomarker, coprostanol, in water overlying the oysters varied between 0.01 µg L−1 and 1.20 µg L−1. The coprostanol/epicoprostanol ratio ranged from 1.32 (September) to 33.25 (February), suggesting that human sewage represents the key input of faecal material into the estuary. However, a correlation between the sterol profile of water above the oysters with that of water that enters from Tiptree Sewage Treatment Works (r = 0.82), and a sample from a site (Quinces Corner) observed to have a high population of Brent geese (r = 0.82), suggests that both sources contribute to the faecal pollution affecting the oysters. In identifying these key faecal inputs, sterol profiling has allowed targeted management practices to be employed to ensure that oyster quality is optimised