Characterizations of ordered semigroups in terms of (∈, ∈ ∨q)-fuzzy interior ideals

In this paper, we give characterizations of ordered semigroups in terms of (∈, ∈ ∨q)-fuzzy interior ideals. We characterize different classes regular (resp. intra-regular, simple and semisimple) ordered semigroups in terms of (∈, ∈ ∨q)-fuzzy interior ideals (resp. (∈, ∈ ∨q)-fuzzy ideals). In this regard, we prove that in regular (resp. intra-regular and semisimple) ordered semigroups the concept of (∈, ∈ ∨q)-fuzzy ideals and (∈, ∈ ∨q)-fuzzy interior ideals coincide. We prove that an ordered semigroup S is simple if and only if it is (∈, ∈ ∨q)-fuzzy simple. We characterize intra-regular (resp. semisimple) ordered semigroups in terms of (∈, ∈ ∨q)-fuzzy ideals (resp. (∈, ∈ ∨q)-fuzzy interior ideals). Finally, we consider the concept of implication-based fuzzy interior ideals in an ordered semigroup, in particular, the implication operators in Lukasiewicz system of continuous-valued logic are discussed

ProsCan for Men: Randomised controlled trial of a decision support intervention for men with localised prostate cancer

Background: Prostate cancer is the most common male cancer in the Western world but is highly heterogeneous in disease progression and outcomes. Consequently, the most substantial morbidity may actually arise from the adverse psychosocial impact of distress in decision-making and long term quality of life effects such as impotence. This paper presents the design of a randomised controlled trial of a decision support/psychosocial intervention for men newly diagnosed with localised prostate cancer. Methods/Design: 350 men per condition (700 men in total) have been recruited after diagnosis and before treatment through urology private practices and hospital outpatient clinics and randomised to 1) a tele-based nurse delivered five session decision support/psychosocial intervention or 2) a usual care control group. Two intervention sessions are delivered before treatment that address decision support, stress management and preparation for treatment. Three further sessions are provided three weeks, seven weeks and five months after treatment that focus on adjustment to cancer, problem solving and coping with treatment side effects. Participants are assessed at baseline (before treatment) and 2, 6, 12, 24 and 36 months post-treatment. Outcome measures include: cancer threat appraisal; decision-related distress and bother from treatment side effects; involvement in decision making; satisfaction with health care; heath care utilisation; use of health care resources; and a return to previous activities. Discussion: The study will provide recommendations about the efficacy of early decision support to facilitate adjustment after prostate cancer. As well the study will identify men diagnosed with localised prostate cancer at risk of poorer long term psychosocial adjustment

cTNM vs. pTNM: the effect of not applying ultrasonography in the identification of cervical nodal disease

Accurate clinical staging of oral squamous cell cancer can be quite difficult to achieve especially if nodal involvement is identified. Radiologically-assisted clinical staging is more accurate and informs the clinician of loco-regional and distant metastasis

Role of rapid urease test and histopathology in the diagnosis of Helicobacter pylori infection in a developing country

BACKGROUND: The aim of this study was to determine the effect of commonly self-prescribed proton pump inhibitors (PPI) on the results of rapid urease test and histology for the diagnosis of H. pylori infection. METHODS: One hundred-nine consecutive patients with dyspeptic symptoms attending the endoscopy suite were enrolled in this study. Antrum biopsy specimens were collected at endoscopy for the rapid urease test (Pronto Dry, Medical Instrument Corp, France) and histopathology. Sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and like-hood ratio of a positive and negative of Pronto Dry test were compared against histology. The gold standard test for the diagnosis of H. pylori infection was histopathology. RESULTS: Sixty-one percent (66/109) patients were males with mean age of 43 ± 14.1 years and age range 17–80 years. Fifty-two percent (57/109) were not on any medications while 48% (52/109) used PPI before presentation to the outpatients. Pronto Dry was positive in 40% (44/109) and negative in 60% (65/109). Histopathology was positive for H. pylori in 57% (62/109) and negative in 43% (47/109). The sensitivity, specificity, PPV, NPV and like-hood ratio of a positive and negative Pronto Dry test with and without PPI were 43.3%, 86.4%, 81.3%, 3.18, 0.656 and 52.8% vs 71.9%, 80%, 82.1%, 69%, 3.59 and 0.35. CONCLUSION: This study shows that the sensitivity, specificity, NPV and PPV of rapid urease test was reduced in patients who are on PPI. The exclusive use of the rapid urease test for the diagnosis of Helicobacter pylori cannot be recommended in patients with prior PPI use

Direct damage controlled seismic design of plane steel degrading frames

A new method for seismic design of plane steel moment resisting framed structures is developed. This method is able to control damage at all levels of performance in a direct manner. More specifically, the method: (a) can determine damage in any member or the whole of a designed structure under any given seismic load, (b) can dimension a structure for a given seismic load and desired level of damage and (c) can determine the maximum seismic load a designed structure can sustain in order to exhibit a desired level of damage. In order to accomplish these things, an appropriate seismic damage index is used that takes into account the interaction between axial force and bending moment at a section, strength and stiffness degradation as well as low cycle fatigue. Then, damage scales are constructed on the basis of extensive parametric studies involving a large number of frames exhibiting cyclic strength and stiffness degradation and a large number of seismic motions and using the above damage index for damage determination. Some numerical examples are presented to illustrate the proposed method and demonstrate its advantages against other methods of seismic design. © 2014, Springer Science+Business Media Dordrecht

Quality control and beam test of GEM detectors for future upgrades of the CMS muon high rate region at the LHC

Gas Electron Multipliers (GEM) are a proven position sensitive gas detector technology which nowadays is becoming more widely used in High Energy Physics. GEMs offer an excellent spatial resolution and a high particle rate capability, with a close to 100% detection efficiency. In view of the high luminosity phase of the CERN Large Hadron Collider, these aforementioned features make GEMs suitable candidates for the future upgrades of the Compact Muon Solenoid (CMS) detector. In particular, the CMS GEM Collaboration proposes to cover the high-eta region of the muon system with large-area triple-GEM detectors, which have the ability to provide robust and redundant tracking and triggering functions. In this contribution, after a general introduction and overview of the project, the construction of full-size trapezoidal triple-GEM prototypes will be described in more detail. The procedures for the quality control of the GEM foils, including gain uniformity measurements with an x-ray source will be presented. In the past few years, several CMS triple-GEM prototype detectors were operated with test beams at the CERN SPS. The results of these test beam campaigns will be summarised

Electrodeposition of CdTe thin films using nitrate precursor for applications in solar cells

Cadmium telluride (CdTe) thin films have been electrodeposited (ED) on glass/fluorine-doped tin oxide (FTO) substrates using simplified two-electrode system in acidic and aqueous solution containing Cd(NO3)2 4H2O and TeO2. The X-ray diffraction (XRD), optical absorption, photoelectrochemical (PEC) cell measurements, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) have been carried out to study the structural, optical, electrical and morphological properties of the CdTe layers. The XRD study shows that the ED-CdTe layers are polycrystalline with cubic crystal structure. Results obtained from optical absorption reveal that the bandgaps of the as-deposited and the CdCl2 treated CdTe layers are in the ranges ~1.50 to ~1.54 eV and ~1.46 to ~1.51 eV, respectively. Observation from PEC measurements indicates a p-, i- and n-type electrical conductivity for as-deposited CdTe layers grown in the cathodic voltage range (1,247–1,258) mV. The SEM images indicate noticeable change in CdTe grain size from ~85 to ~430 nm after CdCl2 treatment with uniform surface coverage of the glass/FTO substrate. The TEM images show the columnar growth structure for as-deposited and CdCl2 treated CdTe layers. The TEM images also indicate an increase in grain’s diameter from ~50 to ~200 nm after CdCl2 treatment

Bioactive compounds of plum mango (Bouea macrophylla Griffith)

The fruit of Bouea macrophylla referred as Plum mango or Gandaria is a popular seasonal fruit, which is widely consumed in the Malay subcontinent. There is ample of traditional knowledge available among the locals on the use of leaves, bark, fruits and seeds of this plant. However, very limited research information and scientific report is available on their composition, phytochemicals or on the bioactive compounds. In the present chapter, we have aimed towards comprehensively providing information on nutritional value, functional qualities, health promoting bioactive compounds and volatile constituents of this underutilized fruit