Controlling interferometric properties of nanoporous anodic aluminium oxide

A study of reflective interference spectroscopy [RIfS] properties of nanoporous anodic aluminium oxide [AAO] with the aim to develop a reliable substrate for label-free optical biosensing is presented. The influence of structural parameters of AAO including pore diameters, inter-pore distance, pore length, and surface modification by deposition of Au, Ag, Cr, Pt, Ni, and TiO2 on the RIfS signal (Fabry-Perot fringe) was explored. AAO with controlled pore dimensions was prepared by electrochemical anodization of aluminium using 0.3 M oxalic acid at different voltages (30 to 70 V) and anodization times (10 to 60 min). Results show the strong influence of pore structures and surface modifications on the interference signal and indicate the importance of optimisation of AAO pore structures for RIfS sensing. The pore length/pore diameter aspect ratio of AAO was identified as a suitable parameter to tune interferometric properties of AAO. Finally, the application of AAO with optimised pore structures for sensing of a surface binding reaction of alkanethiols (mercaptoundecanoic acid) on gold surface is demonstrated

On the properties of poly-aminophenylboronate coatings in capillary electrophoresis for the selective separation of small diol-containing analytes and glycoproteins.

The polymerisation of 3-aminophenylboronic acid (APBA) in aqueous environment has been used for the open tubular modification of capillary electrophoresis (CE) capillaries. Being poly-APBA endowed with boronic acid, aromatic rings and secondary amines groups, it posses a variety of functional groups affecting selectivity. Diastereoisomers (e.g. ascorbic and isoascorbic acid) and proteins (e.g. haemoglobins) were successfully separated onto poly-APBA column, by means of a combination of electrophoresis and open tubular electrochromatography. The mechanism of selection was investigated: results indicate an interplay between enhancing or silencing the contribution of the protonable functionahties (amino groups, boronic acid). The properties of APBA polymer coating make it attractive for CE separation and for further application in affinity separations and chip technologies. (C) 2003 Elsevier B.V. All rights reserved

Surface grafted molecularly-imprinted polymers for protein recognition.

A technique for coating microplate wells with molecularly imprinted polymers (MIP's) specific for proteins is presented. 3-Aminophenylboronic acid was polymerized in the presence of the following templates: microperoxidase, horseradish peroxidase, lactoperoxidase, and hemoglobin, via oxidation of the monomer by ammonium persulfate. This process resulted in the grafting of a thin polymer layer to the polystyrene surface of the microplates. Imprinting resulted in an increased affinity of the polymer toward the corresponding templates. The influence of the washing procedure, template concentration, and buffer pH on the polymer affinity was analyzed. It was shown that the stabilizing function of the support and spatial orientation of the polymer chains and template functional groups are the major factors affecting the imprint formation and template recognition. Easy preparation of the MIPs, their high stability, and their ability to recognize small and large proteins, as well as to discriminate molecules with small variations in charge, make this approach attractive and broadly applicable in biotechnology, assays and sensors

Substitution of antibodies and receptors with molecularly imprinted polymers in enzyme-linked and fluorescent assays.

A new technique for coating microtitre plates with molecularly imprinted polymers (MIP), specific for low-molecular weight analytes (epinephrine, atrazine) and proteins is presented. Oxidative polymerization was performed in the presence of template; monomers: 3-aminophenylboronic acid (APBA), 3-thiopheneboronic acid (TBA) and aniline were polymerized in water and the polymers were grafted onto the polystyrene surface of the microplates. It was found that this process results in the creation of synthetic materials with antibody-like binding properties. It was shown that the MIP-coated microplates are particularly useful for assay development. The high stability of the polymers and good reproducibility of the measurements make MIP coating an attractive alternative to conventional antibodies or receptors used in enzyme linked immunosorbent assay (ELISA)

An electrochemical immunosensor for cardiac Troponin I using electrospun carboxylated multi-walled carbon nanotube-whiskered nanofibres

A sandwich-type nanostructured immunosensor based on carboxylated multi-walled carbon nanotube (CMWCNT)-embedded whiskered nanofibres (WNFs) was developed for detection of cardiac Troponin I (cTnI). WNFs were directly fabricated on glassy carbon electrodes (GCE) by removing the sacrificial component (polyethylene glycol, PEG) after electrospinning of polystyrene/CMWCNT/PEG nanocomposite nanofibres, and utilised as a transducer layer for enzyme-labeled amperometric immunoassay of cTnI. The whiskered segments of CMWCNTs were activated and utilised to immobilise anti-cTnT antibodies. It was observed that the anchored CMWCNTs within the nanofibres were suitably stabilised with excellent electrochemical repeatability. A sandwich-type immuno-complex was formed between cTnI and horseradish peroxidase-conjugated anti-cTnI (HRP-anti-cTnI). The amperometric responses of the immunosensor were studied using cyclic voltammetry (CV) through an enzymatic reaction between hydrogen peroxide and HRP conjugated to the secondary antibody. The nanostructured immunosensor delivered a wide detection range for cTnI from the clinical borderline for a normal person (0.5-2 ng mL(-1)) to the concentration present in myocardial infarction patients (amp;gt; 20 ng mL(-1)), with a detection limit of similar to 0.04 ng mL(-1). It also showed good reproducibility and repeatability for three different cTnI concentration (1, 10 and 25 ng mL(-1)) with satisfactory relative standard deviations (RSD). Hence, the proposed nanostructured immunosensor shows potential for point-of-care testing.Funding Agencies|Ministry of Science, Research and Technology of Iran; European Commission [PIEF-GA-2013.629251]</p