4,374 research outputs found
Trends in medical imaging during pregnancy in the United States and Ontario, Canada, 1996 to 2016
Investigation of high voltage polymeric insulators performance under wet pollution
In this paper, a unique approach based on electrical characteristics observed from measurements of contaminated polymeric insulators was established to calculate the electric field distribution over their surfaces. A case study using two different 33 kV polymeric insulator geometric profiles was performed to highlight the benefits of the proposed modeling approach. The conductance of the pollution layer was tested to establish a nonlinear field-dependent conductivity for pollution modeling. The leakage current (LC) of the polluted insulator was measured in a laboratory under clean and wet conditions. Then, using the finite element method (FEM), the electric field and current density distributions along the insulator were computed. The results showed that the insulators experienced an increase in the electric field (EF) magnitude ranging from 0.3 kV/cm to 3.6 kV/cm for the insulator with similar sheds (type I) and 2.2â4.5 kV/cm for the insulator with alternating sheds (big and small, type II) under the high rain condition with a flow rate of 9 L/h. Meanwhile, the highest electric field under fog was 1.74 kV/cm for the insulator with similar sheds and 2.32 kV/cm for an insulator with alternating sheds. Due to the larger diameter on the big shed and the longer leakage distance on the insulator with alternating sheds, the EF on the insulator with alternating sheds is higher than the EF on the insulator with similar sheds. The proposed modeling and simulation provided a detailed field condition estimation around the insulators. This is critical for forecasting the emergence of dry bands and the commencement of flashover on the surfaces of the insulators
A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence
Due to the advancements in cellular technologies and the dense deployment of
cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the
fifth-generation (5G) and beyond cellular networks is a promising solution to
achieve safe UAV operation as well as enabling diversified applications with
mission-specific payload data delivery. In particular, 5G networks need to
support three typical usage scenarios, namely, enhanced mobile broadband
(eMBB), ultra-reliable low-latency communications (URLLC), and massive
machine-type communications (mMTC). On the one hand, UAVs can be leveraged as
cost-effective aerial platforms to provide ground users with enhanced
communication services by exploiting their high cruising altitude and
controllable maneuverability in three-dimensional (3D) space. On the other
hand, providing such communication services simultaneously for both UAV and
ground users poses new challenges due to the need for ubiquitous 3D signal
coverage as well as the strong air-ground network interference. Besides the
requirement of high-performance wireless communications, the ability to support
effective and efficient sensing as well as network intelligence is also
essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting
aerial and ground users. In this paper, we provide a comprehensive overview of
the latest research efforts on integrating UAVs into cellular networks, with an
emphasis on how to exploit advanced techniques (e.g., intelligent reflecting
surface, short packet transmission, energy harvesting, joint communication and
radar sensing, and edge intelligence) to meet the diversified service
requirements of next-generation wireless systems. Moreover, we highlight
important directions for further investigation in future work.Comment: Accepted by IEEE JSA
STAR-RIS-Enabled Secure Dual-Functional Radar-Communications: Joint Waveform and Reflective Beamforming Optimization
Considering a simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS)-aided dual-functional radar-communications (DFRC) system, this paper proposes a symbol-level precoding-based scheme for concurrent securing confidential information transmission and performing target sensing, where the public signals intended for multiple unclassified users are exploited to deceive the multiple potential malicious radar targets. Specifically, the STAR-RIS-aided DFRC system design is formulated as a joint optimization problem that determines the transmission waveform signal, the transmission and reflection coefficients of STAR-RIS. The objective is to maximize the average received radar sensing power subject to the quality-of-service constraints for multiple communication users, the security constraint for multiple potential eavesdroppers, as well as various practical waveform design restrictions. However, the formulated problem is challenging to handle due to its nonconvexity. Furthermore, the high dimensionality of the optimization variables also renders existing optimization algorithms inefficient. To address these issues, we propose a distance-majorization induced low-complexity algorithm to obtain an efficient solution, which converts the nonconvex joint design problem into a sequence of subproblems that can be solved in closed-form, relieving the required high computational burden of the conventional approaches, e.g., the interior point method. Simulation results confirm the effectiveness of the STAR-RIS in improving the DFRC performance. Besides, by comparing with the state-of-the-art alternating direction method of multipliers (ADMM) algorithm, simulation results validate the efficiency of our proposed optimization algorithm and show that it enjoys excellent scalability for different number of T-R elements equipped at the STAR-RIS
The Genetic Architecture of Complex Traits in Sheep
Many important traits in biology, medicine and agriculture are complex and quantitative in that they exhibit continuous variation and non-trivial patterns of genetic inheritance. They are largely polygenic and influenced by factors such as gene-gene and gene-environment interactions. Important reasons to study complex traits include trying to understand how the genetic components operate on their own and how they relate to each other, quantification of the contributions of these elements to trait variation, and elucidation of the underlying genetic architecture behind a trait. An understanding of the sources and consequences of variation in complex traits and identification of the genes involved provides us with a handle to manipulate biological systems, which can have direct applications in medicine and agricultural production. From an agricultural standpoint there are huge economic benefits to be achieved by a better understanding and exploitation of the genetic architecture of complex production traits such as milk yield in dairy animals and meat quality in e.g. sheep or cattle. This thesis is centred on making some inroads to better understand the genetic architecture of complex traits in sheep. The thesis progresses through a characterization of genetic structure and variability in Australian sheep populations, followed by a genome-wide association study for weight. Then a novel approach to improve estimates of genomic breeding values is discussed. Lastly, the inheritance and partitioning of gene expression variance is studied. A more detailed breakdown of the thesis follows
Validated outcome of treatment changes according to International League Against Epilepsy criteria in adults with drug-resistant focal epilepsy.
OBJECTIVE: Although many studies have attempted to describe treatment outcomes in patients with drug-resistant epilepsy, results are often limited by the adoption of nonhomogeneous criteria and different definitions of seizure freedom. We sought to evaluate treatment outcomes with a newly administered antiepileptic drug (AED) in a large population of adults with drug-resistant focal epilepsy according to the International League Against Epilepsy (ILAE) outcome criteria. METHODS: This is a multicenter, observational, prospective study of 1053 patients with focal epilepsy diagnosed as drug-resistant by the investigators. Patients were assessed at baseline and 6, 12, and 18Â months, for up to a maximum of 34Â months after introducing another AED into their treatment regimen. Drug resistance status and treatment outcomes were rated according to ILAE criteria by the investigators and by at least two independent members of an external expert panel (EP). RESULTS: A seizure-free outcome after a newly administered AED according to ILAE criteria ranged from 11.8% after two failed drugs to 2.6% for more than six failures. Significantly fewer patients were rated by the EP as having a "treatment failure" as compared to the judgment of the investigator (46.7% vs 62.9%, PÂ <Â 0.001), because many more patients were rated as "undetermined outcome" (45.6% vs 27.7%, PÂ <Â 0.001); 19.3% of the recruited patients were not considered drug-resistant by the EP. SIGNIFICANCE: This study validates the use of ILAE treatment outcome criteria in a real-life setting, providing validated estimates of seizure freedom in patients with drug-resistant focal epilepsy in relation to the number of previously failed AEDs. Fewer than one in 10 patients achieved seizure freedom on a newly introduced AED over the study period. Pseudo drug resistance could be identified in one of five cases
Modelling spatiotemporal patterns of dubas bug infestations on date palms in northern Oman: A geographical information system case study
The aim of this paper is to demonstrate how Geographical Information System (GIS) can be used effectively to study infestations of Dubas bug (DB), 'Ommatissus lybicus' Bergevin, in date palm ('Phoenix dactylifera L.') that occurred in northern Oman during 2006-2015. The ability to produce geographical and spatiotemporal layers using GIS is expected to serve an important role in both monitoring and surveillance of DB infestation and its impact in the study area. By using of spatial analytic and geostatistical functions in ArcGIS 10.3âą, data that quantified the infestation levels of DB over a 10-year period from 2006 to 2015 were used to map and model the risk of infestation spatiotemporally. We modelled the spatiotemporal risk of DB infestation by performing hotspot analysis using the Getis-Ord statistic, Gi*. Our results show that annual hotspots over the study period were mainly concentrated in the mountain plains, particularly where farms are located between gradient elevations. Furthermore, the distribution pattern varied considerably with time and space. These results demonstrated the usefulness in following annual DB infestation patterns by studying the average seasonal infestation levels and distribution of hotspots as they can facilitate the allocation of resources for the treatment of infestations and allow for more effective monitoring of its influence on date palm trees
Shear Strength of Soft Clay Reinforced With Encased Lime Bottom Ash Column (ELBAC)
Soft clay soils are problematic soil that causes bearing capacity failure and excessive settlement, leading to severe damage to buildings and foundation. In this study, bottom ash is used to replace the natural aggregate while quicklime is used to increase the bonding between bottomash particles. This research is aimed to investigate the role of single encased lime bottom ash column (ELBAC) in improving the shear strength by using laboratory scale model. Kaolin is being used as soil sample while lime bottom ash as the reinforced column and the column is encased with non-woven geotextile. Laboratory tests are conducted to determine the physical properties of bottom ash, kaolin clay, and quicklime sample. Unconfined Compression Test (UCT) also used to test the shear strength of the reinforced kaolin samples. There are 21 kaolin samples being tested in this study and the dimension of the specimen used is 50mm in diameter and 100mm in height. However, there are two different types of the diameter of single lime bottom ash column being used which are 10mm and 16mm. The heights of the column are 60mm, 80mm and 100mm. The improvement of shear strength of single encapsulated lime bottom ash column with area replacement ratio of 4.00% (10mm column diameter) and 10.24% (16mm column diameter) are 43.58%, 50.00%, 49.17% and 38.08%, 42.67%, 32.75% at sample penetration ratio, Hc/Hs of 0.6, 0.8 and 1.0 respectively. It can be concluded that the shear strength of soft clay could be improved by the installation of the single encapsulated lime bottom ash column
- âŠ