39,019 research outputs found
Effective Carrier Mean-Free Path in Confined Geometries
The concept of exchange length is used to determine the effects of boundary
scattering on transport in samples of circular and rectangular cross section.
Analytical expressions are presented for an effective mean-free path for
transport in the axial direction. The relationship to the phonon thermal
conductivity is discussed. (This letter outlines the results presented in
detail in the longer version, available as cond-mat/9402081)Comment: 12 pages, Late
Sensorless Battery Internal Temperature Estimation using a Kalman Filter with Impedance Measurement
This study presents a method of estimating battery cell core and surface
temperature using a thermal model coupled with electrical impedance
measurement, rather than using direct surface temperature measurements. This is
advantageous over previous methods of estimating temperature from impedance,
which only estimate the average internal temperature. The performance of the
method is demonstrated experimentally on a 2.3 Ah lithium-ion iron phosphate
cell fitted with surface and core thermocouples for validation. An extended
Kalman filter, consisting of a reduced order thermal model coupled with
current, voltage and impedance measurements, is shown to accurately predict
core and surface temperatures for a current excitation profile based on a
vehicle drive cycle. A dual extended Kalman filter (DEKF) based on the same
thermal model and impedance measurement input is capable of estimating the
convection coefficient at the cell surface when the latter is unknown. The
performance of the DEKF using impedance as the measurement input is comparable
to an equivalent dual Kalman filter using a conventional surface temperature
sensor as measurement input.Comment: 10 pages, 9 figures, accepted for publication in IEEE Transactions on
Sustainable Energy, 201
Gaussian process regression for forecasting battery state of health
Accurately predicting the future capacity and remaining useful life of
batteries is necessary to ensure reliable system operation and to minimise
maintenance costs. The complex nature of battery degradation has meant that
mechanistic modelling of capacity fade has thus far remained intractable;
however, with the advent of cloud-connected devices, data from cells in various
applications is becoming increasingly available, and the feasibility of
data-driven methods for battery prognostics is increasing. Here we propose
Gaussian process (GP) regression for forecasting battery state of health, and
highlight various advantages of GPs over other data-driven and mechanistic
approaches. GPs are a type of Bayesian non-parametric method, and hence can
model complex systems whilst handling uncertainty in a principled manner. Prior
information can be exploited by GPs in a variety of ways: explicit mean
functions can be used if the functional form of the underlying degradation
model is available, and multiple-output GPs can effectively exploit
correlations between data from different cells. We demonstrate the predictive
capability of GPs for short-term and long-term (remaining useful life)
forecasting on a selection of capacity vs. cycle datasets from lithium-ion
cells.Comment: 13 pages, 7 figures, published in the Journal of Power Sources, 201
Gaussian Process Regression for In-situ Capacity Estimation of Lithium-ion Batteries
Accurate on-board capacity estimation is of critical importance in
lithium-ion battery applications. Battery charging/discharging often occurs
under a constant current load, and hence voltage vs. time measurements under
this condition may be accessible in practice. This paper presents a data-driven
diagnostic technique, Gaussian Process regression for In-situ Capacity
Estimation (GP-ICE), which estimates battery capacity using voltage
measurements over short periods of galvanostatic operation. Unlike previous
works, GP-ICE does not rely on interpreting the voltage-time data as
Incremental Capacity (IC) or Differential Voltage (DV) curves. This overcomes
the need to differentiate the voltage-time data (a process which amplifies
measurement noise), and the requirement that the range of voltage measurements
encompasses the peaks in the IC/DV curves. GP-ICE is applied to two datasets,
consisting of 8 and 20 cells respectively. In each case, within certain voltage
ranges, as little as 10 seconds of galvanostatic operation enables capacity
estimates with approximately 2-3% RMSE.Comment: 12 pages, 10 figures, submitted to IEEE Transactions on Industrial
Informatic
On-board monitoring of 2-D spatially-resolved temperatures in cylindrical lithium-ion batteries: Part II. State estimation via impedance-based temperature sensing
Impedance-based temperature detection (ITD) is a promising approach for rapid
estimation of internal cell temperature based on the correlation between
temperature and electrochemical impedance. Previously, ITD was used as part of
an Extended Kalman Filter (EKF) state-estimator in conjunction with a thermal
model to enable estimation of the 1-D temperature distribution of a cylindrical
lithium-ion battery. Here, we extend this method to enable estimation of the
2-D temperature field of a battery with temperature gradients in both the
radial and axial directions.
An EKF using a parameterised 2-D spectral-Galerkin model with ITD measurement
input (the imaginary part of the impedance at 215 Hz) is shown to accurately
predict the core temperature and multiple surface temperatures of a 32113
LiFePO cell, using current excitation profiles based on an Artemis HEV
drive cycle. The method is validated experimentally on a cell fitted with a
heat sink and asymmetrically cooled via forced air convection.
A novel approach to impedance-temperature calibration is also presented,
which uses data from a single drive cycle, rather than measurements at multiple
uniform cell temperatures as in previous studies. This greatly reduces the time
required for calibration, since it overcomes the need for repeated cell thermal
equalization.Comment: 11 pages, 8 figures, submitted to the Journal of Power Source
Electric and magnetic Weyl tensors in higher dimensions
Recent results on purely electric (PE) or magnetic (PM) spacetimes in n
dimensions are summarized. These include: Weyl types; diagonalizability;
conditions under which direct (or warped) products are PE/PM.Comment: 4 pages; short summary of (parts of) arXiv:1203.3563. Proceedings of
"Relativity and Gravitation - 100 Years after Einstein in Prague", Prague,
June 25-29, 2012 (http://ae100prg.mff.cuni.cz/
Initial results from the NASA Lewis Bumpy Torus experiment
Initial results were obtained from low power operation of the NASA Lewis Bumpy Torus experiment, in which a steady-state ion heating method based on the modified Penning discharge is applied in a bumpy torus confinement geometry. The magnet facility consists of 12 superconducting coils, each 19 cm i.d. and capable of 3.0 T, equally spaced in a toroidal array 1.52 m in major diameter. A 18 cm i.d. anode ring is located at each of the 12 midplanes and is maintained at high positive potentials by a dc power supply. Initial observations indicate electron temperatures from 10 to 150 eV, and ion kinetic temperatures from 200 eV to 1200 eV. Two modes of operation were observed, which depend on background pressure, and have different radial density profiles. Steady state neutron production was observed. The ion heating process in the bumpy torus appears to parallel closely the mechanism observed when the modified Penning discharge was operated in a simple magnetic mirror field
Design-for-test structure to facilitate test vector application with low performance loss in non-test mode.
A switching based circuit is described which allows application of voltage test vectors to internal nodes of a chip without the problem of backdriving. The new circuit has low impact on the performance of an analogue circuit in terms of loss of bandwidth and allows simple application of analogue test voltages into internal nodes. The circuit described facilitates implementation of the forthcoming IEEE 1149.4 DfT philosophy [1]
- …