The habitability of a stagnant-lid Earth

Plate tectonics is a fundamental component for the habitability of the Earth. Yet whether it is a recurrent feature of terrestrial bodies orbiting other stars or unique to the Earth is unknown. The stagnant lid may rather be the most common tectonic expression on such bodies. To understand whether a stagnant-lid planet can be habitable, i.e. host liquid water at its surface, we model the thermal evolution of the mantle, volcanic outgassing of H$_2$O and CO$_2$, and resulting climate of an Earth-like planet lacking plate tectonics. We used a 1D model of parameterized convection to simulate the evolution of melt generation and the build-up of an atmosphere of H$_2$O and CO$_2$ over 4.5 Gyr. We then employed a 1D radiative-convective atmosphere model to calculate the global mean atmospheric temperature and the boundaries of the habitable zone (HZ). The evolution of the interior is characterized by the initial production of a large amount of partial melt accompanied by a rapid outgassing of H$_2$O and CO$_2$. At 1 au, the obtained temperatures generally allow for liquid water on the surface nearly over the entire evolution. While the outer edge of the HZ is mostly influenced by the amount of outgassed CO$_2$, the inner edge presents a more complex behaviour that is dependent on the partial pressures of both gases. At 1 au, the stagnant-lid planet considered would be regarded as habitable. The width of the HZ at the end of the evolution, albeit influenced by the amount of outgassed CO$_2$, can vary in a non-monotonic way depending on the extent of the outgassed H$_2$O reservoir. Our results suggest that stagnant-lid planets can be habitable over geological timescales and that joint modelling of interior evolution, volcanic outgassing, and accompanying climate is necessary to robustly characterize planetary habitability

Dynamic coupling of photoacclimation and photoinhibition in a model of microalgae growth.

International audienceThe development of mathematical models that can predict photosynthetic productivity of microalgae under transient conditions is crucial for enhancing large-scale industrial culturing systems. Particularly important in outdoor culture systems, where the light irradiance varies greatly, are the processes of photoinhibition and photoacclimation, which can affect photoproduction significantly. The former is caused by an excess of light and occurs on a fast time scale of minutes, whereas the latter results from the adjustment of the light harvesting capacity to the incoming irradiance and takes place on a slow time scale of days. In this paper, we develop a dynamic model of microalgae growth that simultaneously accounts for the processes of photoinhibition and photoacclimation, thereby spanning multiple time scales. The properties of the model are analyzed in connection to PI-response curves, under a quasi steady-state assumption for the slow processes and by neglecting the fast dynamics. For validation purposes, the model is calibrated and compared against multiple experimental data sets from the literature for several species. The results show that the model can describe the difference in photosynthetic unit acclimation strategies between Dunaliella tertiolecta (n-strategy) and Skeletonema costatum (s-strategy)

The Case of Greece

Are the healthier wealthier or the wealthier healthier? Three main questions are the focal points of this book: First, how does individual socio-economic and/or occupational status affect the physical and mental health and sense of well-being of older individuals of working age? Second, how does individual socio-economic and/or occupational status affect the ability of older workers to participate in the labour market? And third, how might policy initiatives be developed to enhance the effectiveness of welfare services for the older workforce? The present study provides a critical assessment of the relevant research that is conducted in Greece, with emphasis on the older workforce, in order to provide policy guidelines for future research. The chapter is organized as follows: Section 2 analyses the indicators and the methodological considerations encountered by researchers, Sections 3, 4 and 5 present and discuss the national institutional schemes that operate in Greece, Section 6 analyses the basic findings of applied research in Greece, and Section 7 concludes

Foundation Optimization and Design for Replacement of the Woodrow Wilson Bridge

The new Woodrow Wilson Bridge (WWB) will replace the existing bridge over the Potomac River to connect Alexandria, Virginia to Prince Georges County, Maryland. The new WWB will extend approximately 1.1 miles across the river, with a 367-ft long bascule span in the main river channel where the water depth is about 36 ft. The subsurface soil profile consists of up to 50 ft of a soft organic silty clay layer that is very vulnerable to scour, underlain by a deep deposit of hard sandy clay. This paper will present results from a Pile Demonstration Program (PDP) that was conducted as part of the bridge replacement project, discuss the various aspects of the seismic design and analysis, and describe how those data were applied to optimize foundation design. The PDP included dynamic monitoring, static load tests and Statnamic load tests at several locations, to evaluate: (i) the pile driveability and associated parameters necessary for dynamic analysis; and (ii) the ultimate skin friction and end bearing values for design. The PDP provided a basis for eliminating static load tests during construction and construction quality control, and for evaluating potential settlement of the existing bridge. Although the seismicity of the region is low, considering the importance of this bridge and the consequences of potential damage during an earthquake, seismic issues were addressed thoroughly in the design of the new structure, including: (i) development of design spectra based on site-specific seismic hazard and ground motion analyses; (ii) implications of the complex soil profile and potential scour on the dynamic response of the foundations; (iii) Soil-Structure Interaction (SSI) analyses for the various foundation alternatives; and (iv) evaluation of the significance of the kinematic SSI effect on the piles. The presented case study proves how results of a pile demonstration program and extensive seismic studies can enable significant optimization of the foundation design and cost savings, and provide significant quality control during construction

A model of chlorophyll fluorescence in microalgae integrating photoproduction, photoinhibition and photoregulation

This paper presents a mathematical model capable of quantitative prediction of the state of the photosynthetic apparatus of microalgae in terms of their open, closed and damaged reaction centers under variable light conditions. This model combines the processes of photoproduction and photoinhibition in the Han model with a novel mathematical representation of photoprotective mechanisms, including qE-quenching and qI-quenching. For calibration and validation purposes, the model can be used to simulate fluorescence fluxes, such as those measured in PAM fluorometry, as well as classical fluorescence indexes. A calibration is carried out for the microalga Nannochloropsis gaditana, whereby 9 out of the 13 model parameters are estimated with good statistical significance using the realized, minimal and maximal fluorescence fluxes measured from a typical PAM protocol. The model is further validated by considering a more challenging PAM protocol alternating periods of intense light and dark, showing a good ability to provide quantitative predictions of the fluorescence fluxes even though it was calibrated for a different and somewhat simpler PAM protocol. A promising application of the model is for the prediction of PI-response curves based on PAM fluorometry, together with the long-term prospect of combining it with hydrodynamic and light attenuation models for high-fidelity simulation and optimization of full-scale microalgae production systems

Voltage-Doubler RF-to-DC Rectifiers for Ambient RF Energy Harvesting and Wireless Power Transfer Systems

Wireless Power Transfer (WPT) is promoted as a key enabling technology (KET) for the widespread use of batteryless Internet of Things (IoT) devices and for 5G wireless networks. RF-to-DC rectifiers are essential components for the exploitation of either ambient RF power or wireless transmitted power from a dedicated source. There are several alternative rectifier topologies which can be selected depending on the desired wireless charging scenario and may include one or more diodes. For full rectification, a minimum of two diodes are needed. The current chapter discusses various implementations of voltage-doubler designs, which revolve around the basic topology of two diodes and two capacitors. Schottky diodes are usually used, in combination with lumped capacitors. Off-the-shelf diodes include both separate diodes and integrated voltage-doubler topologies in a single package. Rectifiers are inherently narrowband, non-linear devices, and the RF-to-DC efficiency, which is usually the figure of merit, depends non-linearly on both the termination load and the received RF power. The bandwidth of the rectifier depends on the preceding matching network

An integrated process of biodiesel production from indigenous microalgae in Northern Greece: first results

For environmental, economic and competence reasons, the fuel industry has pushed for alternative fuels in the past few years. One option that is considered are biofuels, which are renewable fuels and have the characteristic of lower or zero emissions of CO2 in the lifecycle, depending on their origin, their production and use. That is done, because the carbon they contain has been committed in the development of organic matter from the atmosphere, which returns after combustion so the balance of emissions throughout the life cycle of biofuel is "theoretically zero

Mental health and its associations with glucose-lowering medication in women with gestational diabetes mellitus. A prospective clinical cohort study.

Mental health symptoms are frequent in women with gestational diabetes mellitus (GDM) and may influence glycemic control. We therefore investigated if mental health symptoms (high depression and low well-being scores) predicted a need for glucose-lowering medication and if this use of medication influenced the trajectory of mental health during pregnancy and in the postpartum period. We included 341 pregnant women from a cohort of GDM women in a Swiss University Hospital. The World Health Organization Well-being Index-Five was collected at the first and last GDM and at the postpartum clinical visits and the Edinburgh Postnatal Depression Scale at the first GDM and the postpartum clinical visits. Medication intake was extracted from participants' medical records. We conducted linear and logistic regressions with depression as an interaction factor. Mental health symptoms did not predict a need for medication (all p ≥ 0.29). Mental health improved over time (both p ≤ 0.001) and use of medication did not predict this change (all p ≥ 0.40). In women with symptoms of depression, medication was associated with less improvement in well-being at the postpartum clinical visit (p for interaction=0.013). Mental health and glucose-lowering medication did not influence each other in an unfavourable way in this cohort of women with GDM

Fuel poverty increases risk of mould contamination, regardless of adult risk perception & ventilation in social housing properties

INTRODUCTION: Fuel poverty affects 2.4 million UK homes leading to poor hygrothermal conditions and risk of mould and house dust mite contaminations, which in turn increases risk of asthma exacerbation. For the first time we assess how fuel poverty, occupants' risk perception and use of mechanical ventilation mediate the risk of mould contamination in social housing. METHODS: Postal questionnaires were sent to 3867 social housing properties to collect adult risk perception, and demographic and environmental information on occupants. Participant details were linked to data pertaining to the individual properties. Multiple logistic regression was used to calculate odds ratios and confidence intervals while allowing for clustering of individuals coming from the same housing estate. We used Structured Equation Modelling and Goodness of Fit analysis in mediation analyses to examine the role of fuel poverty, risk perception, use of ventilation and energy efficiency. RESULTS: Eighteen percent of our target social housing populations (671 households) were included into our study. High risk perception (score of 8-10) was associated with reduced risk of mould contamination in the bedrooms of children (OR 0.5 95% CI; 0.3-0.9) and adults (OR 0.4 95% CI; 0.3-0.7). High risk perception of living with inadequate heating and ventilation reduced the risk of mould contamination (OR 0.5 95% CI; 0.3-0.8 and OR 0.5 95% CI; 0.3-0.7, respectively). Participants living with inadequate heating and not heating due to the cost of fuel had an increased risk of mould contamination (OR 3.4 95% CI; 2.0-5.8 and OR 2.2 95% CI; 1.5-3.2, respectively). Increased risk perception and use of extractor fans did not mediate the association between fuel poverty behaviours and increased risk of mould contamination. DISCUSSION: Fuel poverty behaviours increased the risk of mould contamination, which corresponds with existing literature. For the first time we used mediation analysis to assess how this association maybe modified by occupant behaviours. Increased risk perception and use of extractor fans did not modify the association between fuel poverty and mould contamination. This suggests that fuel poor populations may not benefit from energy efficiency interventions due to ineffective heating and ventilation practices of those occupants residing participating households. Our findings may be modified by a complex interaction between occupant behaviours and the built environment. We found that participant age, occupancy, SES, pets, drying washing indoors, geographic location, architectural design/age of the property, levels of insulation and type of heating regulated risk of mould contamination. CONCLUSION: Fuel poverty behaviours affected around a third of participating households and represent a risk factor for increased exposures to damp and mouldy conditions, regardless of adult risk perception, heating and ventilation practices. This requires multidisciplinary approach to assess the complex interaction between occupant behaviours, risk perception, the built environment and the effective use of heating and ventilation practices. STUDY IMPLICATIONS: Our findings have implications for housing policies and future housing interventions. Effective communication strategies focusing on awareness and perception of risk may help address indoor air quality issues. This must be supported by improved household energy efficiency with the provision of more effective heating and ventilation strategies, specifically to help alleviate those suffering from fuel poverty.European Regional Development Fund Programme  202497 50002