3,396 research outputs found
Soret driven convection in a colloidal solution heated from above at very large solutal Rayleigh number
Convection in a colloidal suspension with a large negative separation ratio
is studied experimentally by heating from above. Shadowgraph observation at
very large solutal Rayleigh numbers are reported as a function of time. Fast
relaxation oscillations are reported for the root mean square value of the
shadowgraph intensity. While pure fluids exhibit a transition to turbulent
convection for Rayleigh number of about 10^6, stable spoke-pattern planform
with up and down columnar flows are observed up to solutal Rayleigh numbers of
the order of 10^9. It is suggested that the surprising stability of the
planform against turbulence is due to nonlinear focusing arising from the
concentration dependence of the diffusion coefficient.Comment: 10 pages, 4 figure
Application of the continuum damage mechanics model in the three point bending test of Ti-6Al-4V titanium alloy specimens
One of the most important and challenging activities in the simulation of the mechanical behaviour of materials is the prediction of the failure phenomena. If well calibrated, damage models can simulate and predict the failure of materials in a generalized way allowing the replication of not only the calibration tests themselves but also of different loading cases. Generally damage models can be categorized into three different groups including phenomenological models, porosity models and continuum damage mechanics (CDM) models. Different CDM models have been proposed by researchers and these models have been applied in diverse loading conditions, geometries and materials. However the limitations and advantages of the CDM models are still not completely explored in the application areas. In this paper, a CDM model, (previously calibrated with round smooth specimen) has been applied in a three-point bending test model in order to simulate the correlated experiment. Specifically, the CDM framework has been applied in a finite element model and the obtained results have been compared with the experimental data. The tested material is Ti-6Al-4V titanium alloy, which is a widely used material in the aerospace industry because of its high strength and low density. Load-displacement data in the experiments and numerical simulations are the main results, which have been compared. Therefore, the ability of the CDM model to simulate the three point bending test has been investigated and the results are discussed
Locally Inertial Reference Frames in Lorentzian and Riemann-Cartan Spacetimes
In this paper we scrutinize the concept of locally inertial reference frames
(LIRF) in Lorentzian and Riemann-Cartan spacetime structures. We present
rigorous mathematical definitions for those objects, something that needs
preliminary a clear mathematical distinction between the concepts of observers,
reference frames, naturally adapted coordinate functions to a given reference
frame and which properties may characterize an inertial reference frame (if
any) in the Lorentzian and Riemann-Cartan structures. We hope to have clarified
some eventual obscure issues associated to the concept of LIRF appearing in the
literature, in particular the relationship between LIRFs in Lorentzian and
Riemann-Cartan spacetimes and Einstein's most happy though, i.e., the
equivalence principle.Comment: In this version a new reference has been added, some misprints and
typos have been corrected and some few sentences in two remarks and in the
conclusions have been changed for better intelligibilit
A schlieren method for ultra-low angle light scattering measurements
We describe a self calibrating optical technique that allows to perform
absolute measurements of scattering cross sections for the light scattered at
extremely small angles. Very good performances are obtained by using a very
simple optical layout similar to that used for the schlieren method, a
technique traditionally used for mapping local refraction index changes. The
scattered intensity distribution is recovered by a statistical analysis of the
random interference of the light scattered in a half-plane of the scattering
wave vectors and the main transmitted beam. High quality data can be obtained
by proper statistical accumulation of scattered intensity frames, and the
static stray light contributions can be eliminated rigorously. The
potentialities of the method are tested in a scattering experiment from non
equilibrium fluctuations during a free diffusion experiment. Contributions of
light scattered from length scales as long as Lambda=1 mm can be accurately
determined.Comment: 7 pages, 3 figure
Single-center experience in the treatment of visceral artery aneurysms
Background: Visceral artery aneurysms (VAAs), although rare, represent a life-threatening disease with high mortality rates. With the more frequent use of diagnostic tests, there has been an incidental detection of these lesions which are mostly asymptomatic. It follows that surgeons are increasingly called to decide on the most appropriate management of VAAs between an open surgical or endovascular approach and among the different endovascular options currently available. The aim of this retrospective study was to evaluate the results of open surgery and interventional endovascular strategies of visceral artery aneurysms with respect to technical success, therapy-associated complications, and postinterventional follow-up in the elective and emergency situation. Methods: From January 1992 to January 2017, 125 open surgical or endovascular interventions for VAA were performed at our institution. Once the VAA was diagnosed and the indication for treatment was assessed, the preoperative diagnostic work-up consisted of contrast computed tomography (CT) or magnetic resonance imaging (MRI) and, in some patients, digital subtraction angiography. Follow-up included clinical and duplex ultrasound scan (DUS) and contrast-enhanced ultrasound to assess the treated vessel patency and organ perfusion after 1, 6, and 12 months, and yearly thereafter. CT or MRI controls were also performed at 1 year of follow-up and only when DUS was not diagnostic or showed a complication thereafter. After the first 5 years of follow-up, the status of the patient was obtained by a structured telephone survey. Results: The treatment option was endovascular in 56 of 125 cases (44.8%). Technical success was 98.3%. In one case, the procedure was interrupted for the extensive dissection of the afferent vessel. Twenty-six patients were treated by coil embolization while 29 with covered stenting. The endovascular approach was in emergency in two cases (3.6%). In the endovascular group, mortality was nil. Complications occurred in 5 cases (8.9%): 1 subacute intestinal ischemia caused by superior mesenteric artery dissection, 2 aneurysm reperfusion, 1 stent thrombosis, and 1 massive splenic hematoma. In 69 (55.2%) cases, surgical treatment was preferred, with 24 VAA resections and 45 arterial reconstructions. In 20 cases (29%), open surgery was performed in emergency conditions. In the surgical group, 8 emergency patients (40%) died intraoperatively. The mortality after elective surgical interventions was nil. Complications after surgery were 4 graft late thrombosis (5.8%): asymptomatic in three cases and requiring splenectomy in one. Conclusions: There is no overall consensus regarding the indications for treatment of VAA. Currently in emergent setting, the endovascular approach should be considered as the first choice because of its reduced invasiveness, faster way to access and bleeding control; this accounts for the lower morality of the interventional therapy than open surgery. Endovascular approach is effective for elective repair of VAAs, but procedure-related complications may occur in a not negligible number of patients. Given comparable mortality rates and low procedure-related complication rate, surgical approach still has space in the elective management of VAAs, especially for aneurysms unsuitable or challenging for the endovascular option in patients with low surgical risk. The size, location, and morphology of VAAs, systemic or local comorbidities, and specific anatomical situations such as previous abdominal surgery should dictate treatment choice
the numerical modelling of a middle strength rock material under flexural test by finite element method coupled to sph
Abstract: Proper fracture assessment of the geological materials, which are highly exposed to hydrostatic loading, is a persistent challenge, in particular when aiming to develop an adequate numerical modelling technique. The mechanical response of a middle strength rock, namely Pietra Serena sandstone, under a Flexural (Four-Point Bending) test is investigated numerically in this study. The FEM-coupled to-SPH numerical technique has been approached in conjunction with an advanced material model implemented in LS-DYNA, namely the Karagozian and Case Concrete (KCC) model. The state of stress is investigated in different parts of the specimen in order to determine the strength of the material and the crack initiation area. The numerical results are finally validated by experimental data to show the reliability of the model
A numerical investigation on significant parameters influencing the flatwise compressive behaviour of a NomexTM Honeycomb
n/
evaluation of the effects of the numerical modelling choices on the simulation of a tensile test on cfrp composite
Abstract The goal of the present work is to define a method to build a FE model which is able to reproduce an experimental tensile test on CFRP specimen with different stacking sequences (UD and balanced). The defined method assesses the material numerical parameters by means of a simulation that replicates, as a virtual test, the experimental tensile one, and in the future, it will be possible to exploit the data obtained to create a reliable model for the simulation of low velocity impacts. Analyses have been performed using the non-linear solver ABAQUS Explicit. The current work further studies how to model damage and the effect of modifications of the numerical parameters on the results. Indeed, the numerical simulation of composite materials is very sensitive to the numerical choices made. Moreover, from the literature and experiments, the mechanical properties of composites are very variable and hence the evaluation of the model response to such modifications is of particular interest
Knowledge, attitudes, and behavior concerning dental trauma among parents of children attending primary school
BACKGROUND: Traumatic dental injuries occur frequently in children and adolescents. The purpose of the present study is to examine the levels of knowledge and behaviors regarding dental trauma among parents of children attending primary schools in the Apulia region of Italy.
METHODS: The study was carried out using an anonymous questionnaire with closed answers distributed to 2,775 parents who were enrolled based on the entire regional school population. Analyses were conducted using the PROC CORRESP (procedure to perform multiple correspondence analysis) and PROC FASTCLUS (procedure to perform cluster analysis). Statistical significance was set at p-value <0.05.
RESULTS: A total 15.5% of the sample reported that their children had experienced dental trauma. Overall, 53.8% of respondents stated that they knew what to do in cases of dental injury. Regarding the time limit within which it is possible to usefully intervene for dental trauma, 56.8% of respondents indicated "within 30 minutes". Of the total sample, 56.5% knew how to preserve a displaced tooth. A total 62.9% of parents felt it was appropriate for their children to use dental guards during sports activities. The multivariate analysis showed that wrong knowledge are distributed among all kinds of subject. Parents with previous experience of dental trauma referred right behaviours, instead weak knowledge and wrong behaviours are associated with parents that easily worried for dental events.
CONCLUSIONS: This study showed that most parents reported no experience of dental trauma in their children, and half of them did not know what to do in case of traumatic dental injury and they would intervene within 30 minutes, suggesting that dental trauma may trigger panic. However, they did not have the information needed to best assist the affected child. Motivating parents to assume a preventive approach towards dental trauma may produce positive changes that would result an increase of long-term health benefits among both parents and children
Valutazione della capacitĂ di rientro alla base di un elicottero in presenza di danno balistico ad un albero di trasmissione della linea rotore di coda
Nella progettazione di un elicottero militare, destinato ad operare a bassa quota e in ambiente ostile, il danneggiamento di componenti critici, conseguente ad impatto balistico, riveste un ruolo primario nella valutazione delle possibilità di sopravvivenza dell’intera macchina. In questo articolo è quindi proposto uno studio sperimentale, suddiviso in diverse fasi, riguardante la verifica della capacità di un elicottero di portare a termine una missione di rientro alla base a potenza ridotta e in presenza di danneggiamento balistico ad un albero di trasmissione della linea rotore di coda. Il lavoro ha richiesto dapprima l’esecuzione, su esemplari del componente in esame, di prove sperimentali di impatto balistico, condotte utilizzando un proiettile calibro 7.62 NATO. Successivamente su ciascun albero danneggiato sono state eseguite prove torsionali statiche ed a fatica, il cui scopo è stato verificare la resistenza residua del componente all’applicazione di opportuni carichi rappresentativi delle sollecitazioni riscontrate durante la missione di rientro
- …