The Gender Pay Gap for Private Sector Employees in Canada and Britain

This paper uses British and Canadian linked employer-employee data to investigate the importance of the workplace for the gender wage gap. Implementing a novel decomposition approach, we find high levels of unexplained wage inequality in the private sector of both countries, which is related to women receiving relatively lower wages within workplaces than do men. Whilst this inequality is partially offset by women, on average, receiving a workplace specific return which is relatively higher than that paid to men, a substantial and significant unexplained within workplace wage gap remains which is considerably higher in Britain than in Canada. The results are consistent with a prima facie argument that country-specific factors, such as the wage setting environment, are important determinants in explaining the relative size of the gender wage gap.workplaces, gender earnings gap, Britain, Canada

Retardation and reduction of pulse distortion by group-velocity dispersion through pulse shaping

We show that a reduction in the pulse distortion caused by chromatic dispersion can be achieved through pulse shaping. We argue that a simple binary phase mask in the Fourier plane of the laser spectrum can improve the transmission of short pulses in a dispersive channel through reduced broadening. The argument was tested experimentally, and a good agreement was found with the theory

Adiabatic reduction near a bifurcation in stochastically modulated systems

We re-examine the procedure of adiabatic elimination of fast relaxing variables near a bifurcation point when some of the parameters of the system are stochastically modulated. Approximate stationary solutions of the Fokker-Planck equation are obtained near threshold for the pitchfork and transcritical bifurcations. Stochastic resonance between fast variables and random modulation may shift the effective bifurcation point by an amount proportional to the intensity of the fluctuations. We also find that fluctuations of the fast variables above threshold are not always Gaussian and centered around the (deterministic) center manifold as was previously believed. Numerical solutions obtained for a few illustrative examples support these conclusions.Comment: RevTeX, 19 pages and 16 figure

High Resolution Laser Ultrasound Detection of Metal Defects

The standard for sensitive detection and resolution of defects in metal components is scanned focused immersion inspection to produce C-scans. Laser ultrasound, although successfully applied to composite inspection, has previously not produced comparable results in this arena

Wage losses in the year after breast cancer: Extent and determinants among Canadian women

This article is available open access through the publisher’s website at the link below. © The Author 2008.Background - Wage losses after breast cancer may result in considerable financial burden. Their assessment is made more urgent because more women now participate in the workforce and because breast cancer is managed using multiple treatment modalities that could lead to long work absences. We evaluated wage losses, their determinants, and the associations between wage losses and changes for the worse in the family's financial situation among Canadian women over the first 12 months after diagnosis of early breast cancer. Methods - We conducted a prospective cohort study among women with breast cancer from eight hospitals throughout the province of Quebec. Information that permitted the calculation of wage losses and information on potential determinants of wage losses were collected by three pretested telephone interviews conducted over the year following the start of treatment. Information on medical characteristics was obtained from medical records. The main outcome was the proportion of annual wages lost because of breast cancer. Multivariable analysis of variance using the general linear model was used to identify personal, medical, and employment characteristics associated with the proportion of wages lost. All statistical tests were two-sided. Results - Among 962 eligible breast cancer patients, 800 completed all three interviews. Of these, 459 had a paying job during the month before diagnosis. On average, these working women lost 27% of their projected usual annual wages (median = 19%) after compensation received had been taken into account. Multivariable analysis showed that a higher percentage of lost wages was statistically significantly associated with a lower level of education (Ptrend = .0018), living 50 km or more from the hospital where surgery was performed (P = .070), lower social support (P = .012), having invasive disease (P = .086), receipt of chemotherapy (P < .001), self-employment (P < .001), shorter tenure in the job (Ptrend < .001), and part-time work (P < .001). Conclusion - Wage losses and their effects on financial situation constitute an important adverse consequence of breast cancer in Canada.The Canadian Breast Cancer Research Alliance, Canadian Institutes of Health Research, and Fondation de l’Université Laval

Revisiting ecological carrying capacity indices for bivalve culture

Ecological carrying capacity (ECC) indices for bivalve culture rely on key ecosystem turnover rates: 1. clearance time (CT), the time needed for the cultured bivalves to filter the entire bay volume; 2. renewal time (RT), the time required to replace the entire bay volume with external water; and 3. production time (PT), the time needed for phytoplankton biomass renewal via local primary production. These turnover rates are conceptually straightforward but lack measurement standardizations in the context of ECC assessments. This study compares simple turnover rate methods with more complex approaches designed to address key assumptions and improve accuracy. Method comparisons were performed across multiple embayments (systems) in Prince Edward Island, Canada. When crop aggregation and system-scale refiltration effects were considered, CT increased by a factor of 14 to 22 depending on the system and species under cultivation. Seasonal temperature considerations further impacted CT by a factor of 38 to 142. Regarding RT, validated hydrodynamic models and tidal prism models produced remarkably different outcomes; the tidal prism approach underestimated RT by 77–94% across the studied systems. Conversely, PT was unaffected by contrasting phytoplankton parameterization; pre-aquaculture (1969–1970) and contemporary (2011−2012) datasets led to similar PT outcomes. However, other metrics revealed a contemporary shift towards low phytoplankton biomass and smaller phytoplankton cells (picophytoplankton); these observations suggest that PT provides insufficient granularity regarding microalgae biomass replacement. Overall, the study rejects a common assumption that the bay-scale turnover rates serving the conventional CT/RT and CT/PT indices can be easily and accurately parameterized; these indices should be used cautiously in assessing the sustainability of farming activities.publishedVersio

Design of a 3D printer head for additive manufacturing of sugar glass for tissue engineering applications

Additive manufacturing is now considered as a new paradigm that is foreseen to improve progress in many fields. The field of tissue engineering has been facing the need for tissue vascularization when producing thick tissues. The use of sugar glass as a fugitive ink to produce vascular networks through rapid casting may offer the key to vascularization of thick tissues produced by tissue engineering. Here, a 3D printer head capable of producing complex structures out of sugar glass is presented. This printer head uses a motorized heated syringe fitted with a custom made nozzle. The printer head was adapted to be mounted on a commercially available 3D printer. A mathematical model was derived to predict the diameter of the filaments based on the printer head feed rate and extrusion rate. Using a 1 mm diameter nozzle, the printer accurately produced filaments ranging from 0.3 mm to 3.2 mm in diameter. One of the main advantages of this manufacturing method is the self-supporting behaviour of sugar glass that allows the production of long, horizontal, curved, as well as overhanging filaments needed to produce complex vascular networks. Finally, to establish a proof of concept, polydimethylsiloxane was used as the gel matrix during the rapid casting to produce various “vascularized” constructs that were successfully perfused, which suggests that this new fabrication method can be used in a number of tissue engineering applications, including the vascularization of thick tissues

Can a Satellite-Derived Estimate of the Fraction of PAR Absorbed by Chlorophyll (FAPAR(sub chl)) Improve Predictions of Light-Use Efficiency and Ecosystem Photosynthesis for a Boreal Aspen Forest?

Gross primary production (GPP) is a key terrestrial ecophysiological process that links atmospheric composition and vegetation processes. Study of GPP is important to global carbon cycles and global warming. One of the most important of these processes, plant photosynthesis, requires solar radiation in the 0.4-0.7 micron range (also known as photosynthetically active radiation or PAR), water, carbon dioxide (CO2), and nutrients. A vegetation canopy is composed primarily of photosynthetically active vegetation (PAV) and non-photosynthetic vegetation (NPV; e.g., senescent foliage, branches and stems). A green leaf is composed of chlorophyll and various proportions of nonphotosynthetic components (e.g., other pigments in the leaf, primary/secondary/tertiary veins, and cell walls). The fraction of PAR absorbed by whole vegetation canopy (FAPAR(sub canopy)) has been widely used in satellite-based Production Efficiency Models to estimate GPP (as a product of FAPAR(sub canopy)x PAR x LUE(sub canopy), where LUE(sub canopy) is light use efficiency at canopy level). However, only the PAR absorbed by chlorophyll (a product of FAPAR(sub chl) x PAR) is used for photosynthesis. Therefore, remote sensing driven biogeochemical models that use FAPAR(sub chl) in estimating GPP (as a product of FAPAR(sub chl x PAR x LUE(sub chl) are more likely to be consistent with plant photosynthesis processes

Orientations of the lamellar phase of block copolymer melts under oscillatory shear flow

We develop a theory to describe the reorientation phenomena in the lamellar phase of block copolymer melt under reciprocating shear flow. We show that similar to the steady-shear, the oscillating flow anisotropically suppresses fluctuations and gives rise to the parallel-perpendicular orientation transition. The experimentally observed high-frequency reverse transition is explained in terms of interaction between the melt and the shear-cell walls.Comment: RevTex, 3 pages, 1 figure, submitted to PR

Grain boundary pinning and glassy dynamics in stripe phases

We study numerically and analytically the coarsening of stripe phases in two spatial dimensions, and show that transient configurations do not achieve long ranged orientational order but rather evolve into glassy configurations with very slow dynamics. In the absence of thermal fluctuations, defects such as grain boundaries become pinned in an effective periodic potential that is induced by the underlying periodicity of the stripe pattern itself. Pinning arises without quenched disorder from the non-adiabatic coupling between the slowly varying envelope of the order parameter around a defect, and its fast variation over the stripe wavelength. The characteristic size of ordered domains asymptotes to a finite value $R_g \sim \lambda_0\ \epsilon^{-1/2}\exp(|a|/\sqrt{\epsilon})$, where$\epsilon\ll 1$is the dimensionless distance away from threshold,$\lambda_0$the stripe wavelength, and$a$ a constant of order unity. Random fluctuations allow defect motion to resume until a new characteristic scale is reached, function of the intensity of the fluctuations. We finally discuss the relationship between defect pinning and the coarsening laws obtained in the intermediate time regime.Comment: 17 pages, 8 figures. Corrected version with one new figur