35,367 research outputs found
Piezoceramics-based Devices for Active Balancing of Flexible Shafts
This paper focuses on vibration control of flexible shafts by means of rotorfixed piezoelectric materials. The target is to realize compact solutions for the suppression of problematic resonant vibration at so-called flexural critical speeds. For analysis, parametric finite element models of flexible rotors with piezoceramic sheets and strain or displacement sensors are developed, where the number of degrees of freedom is kept low. Several mechanisms which can destabilize flexible rotors are quantisized, such as rotor material damping, dissipation of currents induced in rotor-fixed piezoceramics and active feedback control proportional to rotor strain rates. The effectiveness of low frequency feedback and feedforward control for the suppression of the unbalance response is demonstrated using analytic and experimental results. Emphasis is on the interaction between the dynamics of the rotor and that of the connected electronic circuits. The experimental setup which is used for validation is a flexible shaft equipped with piezoceramic sheets and strain sensors. A slipring assembly is used to simplify measurements with, and control of, the sensors and actuators on the shaft and to facilitate the development of compact drive electronics
A new approach to model tyre/road contact
In the Structural Dynamics and Acoustics group at the University of Twente, we aim to develop a quantitative tyre/road noise model. An essential part of this model is an accurate contact algorithm which is fast enough to simulate tyre vibrations up to the acoustic frequencies. In this paper we present a contact algorithm, describing the contact between a tyre and a road surface, which has the potential to be made very fast using the multigrid techniques developed in the field of elasto-hydrodynamic lubrication. For the development of the algorithm a flexible ring model is used to describe the tyre. The friction model is based on Coulomb’s friction. We present (quasi-)static results obtained from the algorithm for various friction coefficients, as well as frictionless results for a rotating tyre. The vibrations of the tyre obtained by this model have been used to calculate the radiated sound field by means of a boundary element program (BEMSYS)
Hybrid isolation of structure-borne sound
Interior noise problems become more important due to the tendency to construct lighter vehicles. An important source for interior noise in a vehicle is the engine. The structural vibrations induced by the engine will transmit through the vehicle and will finally result in interior noise elsewhere in the vehicle, so-called structure-borne sound. To reduce the interior noise a solution is sought in a combination of passive and active isolation (hybrid isolation) of the engine. A project has been started to investigate this type of isolation and to develop experimentally validated numerical simulations for the design of hybrid isolation system. \ud
This paper focuses on the numerical modelling approach for this type of problems. The model consists of a structural and a bounded acoustic part that are representative for a vehicle. The responses of both parts are determined efficiently with modal superposition. The controller design, necessary for the active part of the isolation, is performed with the optimal control theory that is based on minimization of a cost function. Different cost functions will be compared with each other with emphasis on the performance of the structural related cost functions (e.g. minimization of structural velocities) in comparison with the acoustical cost functions (e.g. minimization of sound pressures)
Factorisation, Parton Entanglement and the Drell-Yan Process
We discuss the angular distribution of the lepton pair in the Drell-Yan
process, hadron+hadron -> \gamma^* X -> l^+ l^- X. This process gives
information on the spin-density matrix \rho^{(q,\bar{q})} of the annihilating
quark-antiquark pair in q+\bar{q} -> l^+ l^-. There is strong experimental
evidence that even for unpolarised initial hadrons \rho^{(q,\bar{q})} is
nontrivial, and therefore the quark-antiquark system is polarised. We discuss
the possibilities of a general \rho^{(q,\bar{q})} -which could be entangled-
and a factorising \rho^{(q,\bar{q})}. We argue that instantons may lead to a
nontrivial \rho^{(q,\bar{q})} of the type indicated by experiments.Comment: 14 pages, 2 figures, comments and references added; to appear in EPJ
The luminosity of GRB afterglows as distance estimator
We investigate the clustering of afterglow light curves observed at X-ray and
optical wavelengths. We have constructed a sample of 61 bursts with known
distance and X-ray afterglow. GRB sources can be divided in three classes,
namely optical and X-ray bright afterglows, optical and X-ray dim one s, and
optically bright -X-ray dim ones. We argue that this clustering is related to
the fireball total energy, the external medium density, the fraction of
fireball energy going in relativistic electrons and magnetic fields. We propose
a method for the estimation of the GRB source redshift based on the observe d
X-ray flux one day after the burst and optical properties. We tested this
method on three recently detected SWIFT GRBs with known redshift, and found it
i n good agreement with the reported distance from optical spectroscopy.Comment: 6 pages, proceeding of the PCHE session at the Journees de la SF2
- …