Use of Heat Pumps in Vapor Absorption Systems

The object of this study is to compare the performance of a gas fired dryer and a dryer that utilizes a heat pump for it\u27s source of heat. Since a heat pump was unavailable for testing, ideal models were used to simulate heat pump behavior. Two temperatures and three different humidities were tested. To simulate the different humidity conditions the solvent coater-dryer was used with a water spray device in one of the heating zones. Using a psychometric chart and wet bulb dry bulb measurements the relative humidity was determined. From the data two curves were generated. Using those curves, mass-energy balances, and heat pump literature furnished by Westinghouse the tests show that anywhere from 20% and 50% could be saved on current costs for energy. Though initial installation costs are higher, a payback could be achieved in as little as ten years

Multiple verification in computational modeling of bone pathologies

We introduce a model checking approach to diagnose the emerging of bone pathologies. The implementation of a new model of bone remodeling in PRISM has led to an interesting characterization of osteoporosis as a defective bone remodeling dynamics with respect to other bone pathologies. Our approach allows to derive three types of model checking-based diagnostic estimators. The first diagnostic measure focuses on the level of bone mineral density, which is currently used in medical practice. In addition, we have introduced a novel diagnostic estimator which uses the full patient clinical record, here simulated using the modeling framework. This estimator detects rapid (months) negative changes in bone mineral density. Independently of the actual bone mineral density, when the decrease occurs rapidly it is important to alarm the patient and monitor him/her more closely to detect insurgence of other bone co-morbidities. A third estimator takes into account the variance of the bone density, which could address the investigation of metabolic syndromes, diabetes and cancer. Our implementation could make use of different logical combinations of these statistical estimators and could incorporate other biomarkers for other systemic co-morbidities (for example diabetes and thalassemia). We are delighted to report that the combination of stochastic modeling with formal methods motivate new diagnostic framework for complex pathologies. In particular our approach takes into consideration important properties of biosystems such as multiscale and self-adaptiveness. The multi-diagnosis could be further expanded, inching towards the complexity of human diseases. Finally, we briefly introduce self-adaptiveness in formal methods which is a key property in the regulative mechanisms of biological systems and well known in other mathematical and engineering areas.Comment: In Proceedings CompMod 2011, arXiv:1109.104

The Cost of Monitoring Alone

We compare the succinctness of two monitoring systems for properties of infinite traces, namely parallel and regular monitors. Although a parallel monitor can be turned into an equivalent regular monitor, the cost of this transformation is a double-exponential blowup in the syntactic size of the monitors, and a triple-exponential blowup when the goal is a deterministic monitor. We show that these bounds are tight and that they also hold for translations between corresponding fragments of Hennessy-Milner logic with recursion over infinite traces.Comment: 22 page

Efficient Large-scale Trace Checking Using MapReduce

The problem of checking a logged event trace against a temporal logic specification arises in many practical cases. Unfortunately, known algorithms for an expressive logic like MTL (Metric Temporal Logic) do not scale with respect to two crucial dimensions: the length of the trace and the size of the time interval for which logged events must be buffered to check satisfaction of the specification. The former issue can be addressed by distributed and parallel trace checking algorithms that can take advantage of modern cloud computing and programming frameworks like MapReduce. Still, the latter issue remains open with current state-of-the-art approaches. In this paper we address this memory scalability issue by proposing a new semantics for MTL, called lazy semantics. This semantics can evaluate temporal formulae and boolean combinations of temporal-only formulae at any arbitrary time instant. We prove that lazy semantics is more expressive than standard point-based semantics and that it can be used as a basis for a correct parametric decomposition of any MTL formula into an equivalent one with smaller, bounded time intervals. We use lazy semantics to extend our previous distributed trace checking algorithm for MTL. We evaluate the proposed algorithm in terms of memory scalability and time/memory tradeoffs.Comment: 13 pages, 8 figure

Poisson Structures of Calogero-Moser and Ruijsenaars-Schneider Models

We examine the Hamiltonian structures of some Calogero-Moser and Ruijsenaars-Schneider N-body integrable models. We propose explicit formulations of the bihamiltonian structures for the discrete models, and field-theoretical realizations of these structures. We discuss the relevance of these realizations as collective-field theory for the discrete models.Comment: 15 pages, no figures; v2 references added, typos correcte

A Martini coarse-grained model of the calcein fluorescent dye

Calcein leakage assays are a standard experimental set-up for probing the extent of damage induced by external agents on synthetic lipid vesicles. The fluorescence signal associated with calcein release from liposomes is the signature of vesicle disruption, transient pore formation or vesicle fusion. This type of assay is widely used to test the membrane disruptive effect of biological macromolecules, such as proteins, antimicrobial peptides and RNA and is also used on synthetic nanoparticles with a polymer, metal or oxide core. Little is known about the effect that calcein and other fluorescent dyes may have on the properties of lipid bilayers, potentially altering their structure and permeability. Here we develop a coarse-grained model of calcein that is compatible with the Martini force field for lipids. We validate the model by comparing its dimerization free energy, aggregation behavior at different concentrations and interaction with a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) membrane to those obtained at atomistic resolution. Our coarse-grained description of calcein makes it suitable for the simulation of large calcein-filled liposomes and of their interactions with external agents, allowing for a direct comparison between simulations and experimental liposome leakage assays

The Influence of Dietary Characteristics on the Milk Quantity and Quality of Riverine Buffaloes: Estimate of the Energy/Protein Requirements, for a Medium-high Production, in the First Ninety Days of Lactation

The data used came from two trials undertaken under the same climatic conditions (spring-summer). In both trials pluriparious buffaloes were utilized similar in weight, body condition score, and milk production from the previous year. From the first trial the data used was from the sub-period 23–88 DIM provided by seven animals fed ad libitum with diet A (6.69 MJ/kg DM; 158.30 g/kg of crude protein) with a forage/concentrate ratio of 48/52. From the second trial the data used was from the sub-period 33–90 DIM provided by seven animals fed ad libitum with diet B (6.63 MJ/kg DM; 179.50 g/kg of crude protein) and by seven animals fed ad libitum with diet C (5.99 MJ/kg DM; 155.40 g/kg of crude protein), each of the diets had the same forage/concentrate ratio (53/47). A significant difference was found in milk production between group B and C (13.08 vs. 11.56 kg/d, p<0.05), an intermediate production (12.10 kg/d) was noted in group A. A significant difference was found between fat (76.58 vs. 69.24 g/kg, p<0.05), protein (46.14 vs. 43.16 g/kg, p<0.05) and casein (39.94 vs. 34.98 g/kg, p<0.05) of the milk of group B with respect to group A. The milk of group C gave fat values (71.80 g/kg), protein (45.52 g/kg) and casein (39.06 g/kg) statistically equal to those of group B. The milk of groups B and C, in respect to the milk of group A, gave values of K20 (1.77, 1.82 vs. 3.68 min, p<0.05), statistically lower and values of A30 (48.28, 47.27 vs. 40.64 mm, p<0.05) statistically higher. Two simple linear regressions were calculated where the independent variable (x) was the daily standardized milk production, the dependent variable (y) or the daily intake of net energy or crude protein. Equation 1) NE (MJ/d) = 74.4049+2.8308×kg of normalized milk; equation 2) CP (kg/d) = 1.4507+0.1085×kg of normalized milk, both the equations were significant (p<0.05) with determination coefficients of 0.58 and 0.50 respectively. For a production of normalized milk that varies from 9 to 13 kg, the respective energy-protein concentrations fluctuate from 6.09 to 6.78 MJ/kg DM and from 148.00 to 174.46 g/kg DM