3,227 research outputs found
Application of novel techniques for interferogram analysis to laser-plasma femtosecond probing
Recently, two novel techniques for the extraction of the phase-shift map
(Tomassini {\it et.~al.}, Applied Optics {\bf 40} 35 (2001)) and the electronic
density map estimation (Tomassini P. and Giulietti A., Optics Communication
{\bf 199}, pp 143-148 (2001)) have been proposed. In this paper we apply both
methods to a sample laser-plasma interferogram obtained with femtoseconds probe
pulse, in an experimental setup devoted to laser particle acceleration studies.Comment: Submitted to Laser and Particle Beam
A Control And Data Acquisition System Based On The PXI Bus For The New Photon Beam Position Monitor Prototype
A Molecular Dynamics Study of Noncovalent Interactions between Rubber and Fullerenes
The percolation and networking of filler particles is an important issue in the field of rubber reinforcement, and much effort is given to clarify the true nature of the reinforcement mechanism and the viscoelastic behavior. The concentration of nanofillers also in the presence of large amounts of carbon black is a parameter that can influence the macroscopic rubber behavior. In this paper, noncovalent interactions between C60 fullerenes with poly-1,4-cis-isoprene (PI) either as such or modified are studied through atomistic simulations based on molecular mechanics (MM) and molecular dynamics (MD) methods. At first, the conformational properties of a single chain and of 12 PI chains in a periodic simulation box are studied. Afterwards, the conformational properties of a single PI chain polymer terminated with a -COOH group, and then a bulk system formed by chains of unmodified and some PI modified chains are considered. Then, the systems formed by adding fullerenes to these two different bulk systems are studied. Relatively small interaction energy between rubber and fullerenes being well dispersed in the sample is found. The simulations showed a preferential tendency of fullerenes to display self-aggregation, in the presence of even a small fraction of modified polymer chains
Hardware-Software Co-Design of BIKE with HLS-Generated Accelerators
In order to mitigate the security threat of quantum computers, NIST is undertaking a process to standardize post-quantum cryptosystems, aiming to assess their security and speed up their adoption in production scenarios. Several hardware and software implementations have been proposed for each candidate, while only a few target heterogeneous platforms featuring CPUs and FPGAs. This work presents a HW/SW co-design of BIKE for embedded platforms featuring both CPUs and small FPGAs and employs high-level synthesis (HLS) to timely deliver the hardware accelerators. In contrast to state-of-the-art solutions targeting performance-optimized HLS accelerators, the proposed solution targets the small FPGAs implemented in the heterogeneous platforms for embedded systems. Compared to the software- only execution of BIKE, the experimental results collected on the systems-on-chip of the entire Xilinx Zynq-7000 family highlight a performance speedup ranging from 1.37x, on Z-7010, to 2.78x, on Z-7020
Polyether from a biobased Janus molecule as surfactant for carbon nanotubes
A new polyether (PE) was prepared from a biobased Janus molecule, 2-(2,5-dimethyl-1H-pyrrol-1-yl)-1,3- propanediol (serinol pyrrole, SP). SP was synthesized with very high yield (about 96%) and high atom efficiency (about 80%) by reacting a biosourced molecule, such as serinol, with 2,5-hexanedione in the absence of solvent or catalyst. The reaction of SP with 1,6-dibromohexane led to PE oligomers, that were used as surfactants for multiwalled carbon nanotubes (MWCNT), in ecofriendly polar solvents such as acetone and ethyl acetate. The synergic interaction of aromatic rings and oxyalkylene sequences with the carbon allotrope led to dramatic improvement of surfactant efficiency: only 24% of SP based PE was extracted with ethyl acetate from the adduct with MWCNT, versus 98% of a typical pluronic surfactant. Suspensions of MWCNT-PE adducts in ethyl acetate were stable for months. High resolution transmission electron microscopy revealed a film of oligomers tightly adhered to MWCNT surface
Dynamics of charge-displacement channeling in intense laser-plasma interactions
The dynamics of transient electric fields generated by the interaction of
high intensity laser pulses with underdense plasmas has been studied
experimentally with the proton projection imaging technique. The formation of a
charged channel, the propagation of its front edge and the late electric field
evolution have been characterised with high temporal and spatial resolution.
Particle-in-cell simulations and an electrostatic, ponderomotive model
reproduce the experimental features and trace them back to the ponderomotive
expulsion of electrons and the subsequent ion acceleration.Comment: 5 figures, accepted for publication in New Journal of Physic
Experimental study of picosecond laser plasma formation in thin foils
A high performance, fully controlled picosecond
laser system has been designed and built with the aid of
a numerical code capable of simulating the temporal behavior
of the laser system, including each active and passive
component. The laser performance was characterized with
an optical streak camera, equivalent plane monitor, and
calorimeter measurements. The laser pulse was focused on
150-nm thick foils to investigate plasma formation and
the related transmittivity of the laser light. The experimental
data are in very good agreement with the predictions of
a simple, 2D analytical model that takes into account the
actual shot-to-shot features of the laser pulse. The temporal
profile of the pulse and the intensity distribution in
the focal spot were found to play a key role in determining
the transmission properties of the laser-irradiated foil.
This work may be relevant to a wide class of laser exploded
foil plasma experiments
Analysis of space-resolved X-ray spectra from laser plasmas
High dynamic range, space-resolved X-ray spectra, obtained
using a TlAP crystal and a cooled CCD camera as a detector,
were used to investigate the electron density and temperature
profiles of an aluminum laser plasma with micrometer resolution.
The electron density profile retrieved from the measurements
is compared with numerical predictions from the two hydrodynamics
codes MEDUSA (1D) and POLLUX (2D). It is shown that 2D density
profiles can be successfully reproduced by 1D simulations using
a spherical geometry with an ad hoc initial radius, leading
to similar electron temperature profiles
- …