229 research outputs found
Environmental urbanization assessment using gis and multicriteria decision analysis: a case study for Denizli (Turkey) municipal area
In recent years, life quality of the urban areas is a growing interest of civil engineering. Environmental quality is essential to display the position of sustainable development and asserts the corresponding countermeasures to the protection of environment. Urban environmental quality involves multidisciplinary parameters and difficulties to be analyzed. The problem is not only complex but also involves many uncertainties, and decision-making on these issues is a challenging problem which contains many parameters and alternatives inherently. Multicriteria decision analysis (MCDA) is a very prepotent technique to solve that sort of problems, and it guides the users confidence by synthesizing that information. Environmental concerns frequently contain spatial information. Spatial multicriteria decision analysis (SMCDA) that includes Geographic Information System (GIS) is efficient to tackle that type of problems. This study has employed some geographic and urbanization parameters to assess the environmental urbanization quality used by those methods. The study area has been described in five categories: very favorable, favorable, moderate, unfavorable, and very unfavorable. The results are momentous to see the current situation, and they could help to mitigate the related concerns. The study proves that the SMCDA descriptions match the environmental quality perception in the city. © 2018 Erdal Akyol et al
In Situ Synthesis of Polymer/Clay Nanocomposites by Type II Photoinitiated Free Radical Polymerization
Cataloged from PDF version of article.A new synthetic route for the preparation of poly(methyl methacrylate)/montmorillonite (PMMA/MMT) nanocomposites was reported. In this method, first 4-(dimethylamino)benzoate group was incorporated into silicate layers of clay by esterification reaction and used to produce PMMA/MMT nanocomposites by in situ Type II photoinitiated free radical polymerization. In situ photopolymerization of methyl methacrylate through into the silicate layers by either visible or UV light irradiation leads to PMMA/MMT nanocomposites. Copyright © 2011 Wiley Periodicals, Inc
Polysulfone/Clay Nanocomposites by in situ Photoinduced Crosslinking Polymerization
Cataloged from PDF version of article.PSU/MMT nanocomposites are prepared by dispersing MMT nanolayers in a PSU matrix via in situ photoinduced crosslinking polymerization. Intercalated methacrylate-functionalized MMT and polysulfone dimethacrylate macromonomer are synthesized independently by esterification. In situ photoinduced crosslinking of the intercalated monomer and the PSU macromonomer in the silicate layers leads to nanocomposites that are formed by individually dispersing inorganic silica nanolayers in the polymer matrix. The morphology of the nanocomposites is investigated by XRD and TEM, which suggests the random dispersion of silicate layers in the PSU matrix. TGA results confirm that the thermal stability and char yield of PSU/MMT nanocomposites increases with the increase of clay loading
Bilateral CMUT cells and arrays: Equivalent circuits, diffraction constants, and substrate impedance
We introduce the large-signal and small-signal equivalent circuit models for a capacitive micromachined ultrasonic transducer (CMUT) cell, which has radiating plates on both sides. We present the diffraction coefficient of baffled and unbaffled CMUT cells. We show that the substrate can be modeled as a very thick radiating plate on one side, which can be readily incorporated in the introduced model. In the limiting case, the reactance of this backing impedance is entirely compliant for substrate materials with a Poisson's ratio less than 1/3. We assess the dependence of the radiation performance of the front plate on the thickness of the back plate by simulating an array of bilateral CMUT cells. We find that the small-signal linear model is sufficiently accurate for large-signal excitation, for the purpose of the determining the fundamental component. To determine harmonic distortion, the large-signal model must be used with harmonic balance analysis. Rayleigh-Bloch waves are excited at the front and back surfaces similar to conventional CMUT arrays. © 1986-2012 IEEE
Designing efficient CMUT cells for airborne applications
In this work, we study airborne CMUT cells with vacuum gap where silicon plate is operated both in elastically linear and nonlinear regimes. We report the results of a new mode of operation where the plate center swings the entire gap. The plate is kept in elastically linear region in this mode. Very large pressure levels are obtained at relatively low drive voltage levels. The operation is very efficient but the bandwidth is less than 1%. We considered operating the silicon membrane in elastically nonlinear region for larger bandwidth without sacrificing efficiency. This is achieved by employing the stiffening effect due to the atmospheric pressure. We derived the new model of the CMUT, where the membrane profile deviates from linear profile as a function of the differential static pressure on it. We present the force, the compliance models and the static analysis of stiffened CMUT cells in this work. © 2014 IEEE
Acoustical tuning of CMUT receiver arrays
Cell placement in an element and structural modifications on the array baffle significantly change the bandwidth, band shape and signal to noise ratio of a CMUT receiver array. In this paper, optimum receiver performance tailoring by means of cell placement, cell size variation and use of dummy cells in the array elements is discussed. The performance of the array is modified acoustically at the acoustic port of the elements. © 2016 IEEE
Optimization of a Collapsed Mode CMUT Receiver for Maximum Off-Resonance Sensitivity
We propose an airborne collapse capacitive micromachined ultrasonic transducer (CMUT) as a practical viable ultrasound transducer capable of providing a stable performance at the off-resonance frequencies. Traditional practice is to bias the CMUT plate close to collapse voltage to achieve high coupling coefficient and sense the incoming ultrasound as an open-circuit receive voltage signal of the transducer or short-circuit receive current (SCRC). Maintaining CMUT plate in the vicinity of collapse threshold is rather difficult. In this paper, an analytic approach to design an airborne collapsed-mode CMUT for maximum off-resonance sensitivity is presented. We use small-signal circuit model to evaluate the performance of a collapsed CMUT for varying operating conditions. CMUT operational parameters that yield the highest off-resonance SCRC are directly obtained from performance design curves. Collapsed CMUT plate is then biased in a critical biasing region that produces a stable and maximum off-resonance sensitivity. We experimentally verify and measure a stable sensitivity of a fabricated collapsed CMUT cell of -60 dB V/Pa at 100 kHz when biased between 50 to 65 V. We characterize our linear circuit model performance against the measured performance of collapsed CMUT in air within 4-dB tolerance. [2018-0058
Synthesis of polybenzoxazine/clay nanocomposites by in situ thermal ring-opening polymerization using intercalated monomer
A new class of polybenzoxazine/montmorillonite (PBz/MMT) nanocomposites has been prepared by the in situ polymerization of the typical fluid benzoxazine monomer, 3-pentyl-5-ol-3,4-dihydro-1,3-benzoxazine, with intercalated benzoxazine MMT clay. A pyridine-substituted benzoxazine was first synthesized and quaternized by 11-bromo-1-undecanol and then used for ion exchange reaction with sodium ions in MMT to obtain intercalated benzoxazine clay. Finally, this organomodified clay was dispersed in the fluid benzoxazine monomers at different loading degrees to conduct the in situ thermal ring-opening polymerization. Polymerization through the interlayer galleries of the clay led to the PBz/MMT nanocomposite formation. The morphologies of the nanocomposites were investigated by both X-ray diffraction and transmission electron microscopic techniques, which suggested the partially exfoliated/intercalated structures in the PBz matrix. Results of thermogravimetric analysis confirmed that the thermal stability and char yield of PBz nanocomposites increased with the increase of clay content. © 2011 Wiley Periodicals, Inc
Protective effect of leptin against ischemia-reperfusion injury in the rat small intestine
BACKGROUND: The small intestine is extremely sensitive to ischemia-reperfusion (I/R) injury and a range of microcirculatory disturbances which contribute to tissue damage. Previous studies have shown that leptin plays an important physiological role in the microvasculature. The aim of this study was to evaluate the protective effects of leptin in I/R – induced mucosal injury in the small intestine. METHODS: Forty rats were divided into 5 groups (n = 8). Group I was subjected to a sham operation. Following mesenteric ischemia in group II (control); physiologic saline 1 cm(3), in group III; leptin 100 μg/kg, and physiologic saline 1 cm(3), in group IV; N(G)-L-arginine methyl ester (L-NAME) 20 mg/kg, and physiologic saline 1 cm(3), in group V; leptin 100 μg/kg, L-NAME 20 mg/kg, and physiologic saline 1 cm(3 )were given intra-peritoneally. In these groups, an I/R procedure was performed by occlusion of the superior mesenteric artery for 45 min followed by 120 min reperfusion. After reperfusion, the small intestines were resected for malondialdehyde (MDA) and nitric oxide (NO) concentration and histopathologic properties. Mucosal lesions were scored between 0 and 5. Tissue MDA and NO concentration and histopathologic grades were compared statistically. RESULTS: Tissue MDA level significantly increased (P < 0.05), tissue NO level significantly decreased in group V animals, compared to group III animals respectively (P < 0.001). Histopathologically, intestinal injury significantly decreased in the leptin treated ischemic group. CONCLUSION: Leptin can be used safely in mesenteric occlusive diseases, since it induces NO formation and release in mesenteric vessels
Effect of the plant-based hemostatic agent Ankaferd Blood Stopper® on the biocompatibility of mineral trioxide aggregate
- …