Gamma radiation exposure of MCT diode arrays

Investigations of electrical properties of long-wavelength infrared (LWIR) mercury cadmium telluride (MCT) arrays exposed to gamma-radiation have been performed. Resistance-area product characteristics of LWIR n{+}-p photodiodes have been investigated using microprobe technique at T=78 K before and after an exposure to various doses of gamma-radiation. The current transport mechanisms for those structures are described within the framework of the balance equation model taking into account the occupation of the trap states in the band gap.Comment: 11 pages, 4 figures, submitted to Semiconductor Science and Technolog

Room temperature mid-infrared InAsSbN multi-quantum well photodiodes grown by MBE

Room temperature photoresponse in the mid-infrared spectral region is demonstrated from InAsSbN/InAs multi-quantum well photodiodes grown by nitrogen plasma assisted molecular beam epitaxy. The structural quality of the InAsSbN MQWs was ascertained in situ by reflection high energy electron diffraction and ex situ by high resolution x-ray diffraction and photoluminescence measurements. The extended long wavelength photoresponse is identified to originate from the electron–heavy hole (e1–hh1) and electron–light hole (e1–lh1) transitions in the InAsSbN MQW, with a cut off wavelength ~4.20 µm and peak detectivity D *  =  1.25  ×  109 cm Hz1/2 W−1

Grit as a predictor of success and persistence for community college students

This quantitative study investigated the ability of the noncognitive characteristic of grit to predict community college student success and persistence. Grit levels were measured using the eight-item Grit-S scale that was administered to students in classes of a large suburban community college. Individual-level institutional data also were collected at the time of application and during the time students were enrolled. Community college student success was assessed using two measures: (1) students\u27 completion of all the courses they enrolled in at the beginning of the semester, and (2) students\u27 end-of-semester, noncumulative, grade point average. Persistence was assessed by determining students\u27 enrollment status during the semester immediately following data collection. If students were enrolled as of the college\u27s official census day, they were considered to have persisted. Preliminary bivariate correlations were conducted in addition to multiple linear regressions. Multiple logistic regression was performed to determine to what extent grit predicted end-of-semester grade point averages, course completion rates, and semester-to-semester persistence of community college students. The results of the study indicated that grit was a predictor of student success; grittier community college students were more likely than students with lower grit scores to complete the classes they enrolled in and to have higher end-of-semester grade point averages. Grit was not found to be a predictor of semester-to-semester persistence

Simulation and analysis of a digital scanning system

The analysis and simulation of the motion of a digitally-controlled digital imaging system is presented. The dynamic system consists of a scanning carriage, power transmission elements, a prime mover, and a control subsystem. The prime mover is a permanent magnet DC motor that is positioned by a direct digital control system. The scan carriage motion is mathematically modeled and simulated using ACSL and DADS simulation software. T he simulation results are compared to empirical data. It is shown that the dynamic response of the actual scan system can be predicted quite well using such simulations. Furthermore, these simulations can aid in the design of vibration-sensitive image formation devices

Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light

Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, it is possible to achieve a wavelength-independent absorptivity of up to 50 %, depending on the dielectric properties of the underlying substrate. However, existing absorber films typicallyrequire a thickness of the order of tens of nanometers, such as titanium nitride (14 nm), whichcan significantly deteriorate the response of a thermal transducers. Here, we present the application of ultrathin gold (2 nm) on top of a 1.2 nm copper oxide seed layer as an effective IR absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3) %, ranging from 2 $\mu$m to 20 $\mu$m, could be obtained and is further discussed. The presented gold thin-film represents analmost ideal impedance-matched IR absorber that allows a significant improvement of state-of-the-art thermal detector technology

Short-wavelength infrared photodetector on Si employing strain-induced growth of very tall InAs nanowire arrays

One-dimensional crystal growth enables the epitaxial integration of III-V compound semiconductors onto a silicon (Si) substrate despite significant lattice mismatch. Here, we report a short-wavelength infrared (SWIR, 1.4-3 mu m) photodetector that employs InAs nanowires (NWs) grown on Si. The wafer-scale epitaxial InAs NWs form on the Si substrate without a metal catalyst or pattern assistance; thus, the growth is free of metal-atom-induced contaminations, and is also cost-effective. InAs NW arrays with an average height of 50 mu m provide excellent anti-reflective and light trapping properties over a wide wavelength range. The photodetector exhibits a peak detectivity of 1.9 x 10(8) cm.Hz(1/2)/W for the SWIR band at 77 K and operates at temperatures as high as 220 K. The SWIR photodetector on the Si platform demonstrated in this study is promising for future low-cost optical sensors and Si photonicsopen0

An acid-stable laccase from sclerotium rolfsii with potential for wool dye decolourization

The plant pathogen basidiomycete S. rolfsii secretes two laccases (SRL1 and SRL2) with molecular weights of 55 and 86 kDa, respectively. Laccase production was shown to be inducible by the addition of 2,5-xylidine to the cultural media. After treatment with a combination of chitinase and -1,3-glucanase, two different laccases were isolated from the sclerotia depending on the stage of sclerotia development. The more prominent laccase, SRL1, was purified and found to decolourize the industrially important wool azo dye Diamond Black PV 200 without the addition of redox mediators. The enzyme (pI 5.2) was active in the acidic pH range, showing an optimal activity at pH 2.4, with ABTS as substrate. The optimum temperature for activity was determined to be 62 ◦C. Enzyme stability studies revealed that SRL1 was notably stable at 18 ◦C and pH 4.5, retaining almost full activity after a week. Oxidation of tyrosine was not detectable under the reaction conditions but the enzyme did oxidize a variety of the usual laccase substrates. SRL1 was strongly inhibited by sodium azide and fluoride. Dye solutions decolourized with the immobilized laccase were successfully used for redyeing.(undefined

Local adaptation of a parasite to solar radiation impacts disease transmission potential, spore yield, and host fecundity*

Environmentally transmitted parasites spend time in the abiotic environment, where they are subjected to a variety of stressors. Learning how they face this challenge is essential if we are to understand how host–parasite interactions may vary across environmental gradients. We used a zooplankton–bacteria host–parasite system where availability of sunlight (solar radiation) influences disease dynamics to look for evidence of parasite local adaptation to sunlight exposure. We also examined how variation in sunlight tolerance among parasite strains impacted host reproduction. Parasite strains collected from clearer lakes (with greater sunlight penetration) were most tolerant of the negative impacts of sunlight exposure, suggesting local adaptation to sunlight conditions. This adaptation came with both a cost and a benefit for parasites: parasite strains from clearer lakes produced relatively fewer transmission stages (spores) but these strains were more infective. After experimental sunlight exposure, the most sunlight‐tolerant parasite strains reduced host fecundity just as much as spores that were never exposed to sunlight. Sunlight availability varies greatly among lakes around the world. Our results suggest that the selective pressure sunlight exposure exerts on parasites may impact both parasite and host fitness, potentially driving variation in disease epidemics and host population dynamics across sunlight availability gradients.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/156433/3/evo13940.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/156433/2/evo13940-sup-0001-SuppMat.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/156433/1/evo13940_am.pd