Lamb wave near field enhancements for surface breaking defects in plates

Near field surface wave ultrasonic enhancements have previously been used to detect surface breaking defects in thick samples using Rayleigh waves. Here, we present analogous surface wave enhancements for Lamb waves propagating in plates. By tracking frequency intensities in selected regions of time-frequency representations, we observe frequency enhancement in the near field, due to constructive interference of the incident wave mode with those reflected and mode converted at the defect. This is explained using two test models; a square based notch and an opening crack, which are used to predict the contribution to the out-of-plane displacement from the reflected and mode converted waves. This method has the potential to provide a reliable method for the near field identification and characterisation of surface breaking defects in plates

A study on the near-field interactions of ultrasonic surface waves with surface-breaking defects

This thesis is concerned with the detection of surface-breaking defects, such as stress corrosion cracking, using an ultrasonic scanning approach in which a laser source and detector are scanned over the near-field of a defect. Large increases in the amplitude and frequency content of an incident ultrasonic wave are present when either the source or the detector is very close to the defect, leading to a phenomenon known as ultrasonic near-field enhancement. The extent of the ultrasonic enhancement varies with defect characteristics such as defect depth and angle to the surface. Ultrasonic enhancement is observed in both experiment and finite element simulations using Rayleigh waves for both scanning laser detection and scanning laser source methods. The near-field enhancement is shown to vary as a function of the angle of the defect to the horizontal for Rayleigh wave enhancements, allowing the positioning and characterisation of artificial angled defects that are similar to rolling contact fatigue defects in railtrack. The mechanisms behind the near-field enhancement of Rayleigh waves at angled defects are identified, and this aids in the understanding of the behaviour of ultrasound as it interacts with surface-breaking defects. Ultrasonic enhancements are also reported to be present in individual Lamb wave modes for interactions with artificial open-mouthed defects in thin plates, which are similar to the open end of stress corrosion defects. The mechanisms behind both the scanning laser detection and scanning laser source enhancements are identified and used to explain the variation in the enhancement as a function of increasing defect severity. Positioning of these defects is also achieved by identification of the enhancement location. Finally, the scanning laser technique is applied to real stress-driven defects, and both scanning approaches are shown to be capable of detecting partially-closed defects in a variety of sample geometries. The position, geometric alignment and an estimate of the defect depth are obtained for real defects in thin plates, pipework sections and in irregularly shaped engine components

Vapor phase growth technique and system for several 3-5 compound semiconductors Quarterly technical report

Vapor phase growth technique and system for group 3A and 5A compound semiconductor

Hypervelocity impacts into stainless-steel tubes armored with reinforced beryllium

Hypervelocity impact into stainless steel tubes armored with reinforced berylliu

Scanning laser source and scanning laser detection techniques for different surface crack geometries

Standard test samples typically contain simulated defects such as slots machined normal to the surface. However, real defects will not always propagate in this manner; for example, rolling contact fatigue on rails propagates at around 25º to the surface, and corrosion cracking can grow in a branched manner. Therefore, there is a need to understand how ultrasonic surface waves interact with different crack geometries. We present measurements of machined slots inclined at an angle to the surface normal, or with simple branched geometries, using laser ultrasound. Recently, Rayleigh wave enhancements observed when using the scanning laser source technique, where a generation laser is scanned along a sample, have been highlighted for their potential in detecting surface cracks. We show that the enhancement measured with laser detector scanning can give a more significant enhancement when different crack geometries are considered. We discuss the behaviour of an incident Rayleigh wave in the region of an angled defect, and consider mode-conversions which lead to a very large enhancement when the detector is close to the opening of a shallow defect. This process could be used in characterising defects, as well as being an excellent fingerprint of their presence

Non-contact ultrasonic detection of angled surface defects

Non-destructive testing is an important technique, and improvements are constantly needed. Surface defects in metals are not necessarily confined to orientations normal to the sample surface; however, much of the previous work investigating the interaction of ultrasonic surface waves with surface-breaking defects has assumed cracks inclined at 90° to the surface. This paper explores the interaction of Rayleigh waves with cracks which have a wide range of angles and depths relative to the surface, using a non-contact laser generation and detection system. Additional insight is acquired using a 3D model generated using finite element method software. A clear variation of the reflection and transmission coefficients with both crack angle and length is found, in both the out-of-plane and in-plane components. The 3D model is further used to understand the contributions of different wavemodes to B-Scans produced when scanning a sample, to enable understanding of the reflection and transmission behaviour, and help identify angled defects. Knowledge of these effects is essential to correctly gauge the severity of surface cracking

Theoretical Elements of Acoustic Emission Spectra

I will be describing an acoustic emission program at the National Bureau of Standards sponsored jointly by NBS and the Electric Power Research Institute. This is part of a larger comprehensive NDE program at NBS. The acoustic emission program uses the spectral analysis approach for the characterization of moving defects and, as I will point out, includes the development of an acoustic emission transducer calibration facility as well as the experimental study of crack motion in glass and pressure vessel steels. These require a quantitative theory which serves to guide the experimental design as well as to interpret the results

Scanning laser techniques for characterisation of different surface breaking defect geometries

Measurements using a laser scanning system consisting of a pulsed Nd:YAG laser to generate surface ultrasonic waves and an interferometer to detect the surface displacement, are presented for different samples and defect geometries. We show, firstly, details of the interaction of Rayleigh waves in thick samples with machined slots inclined at an angle to the surface normal, or with simple branched geometries, scanning the generation source over the defect (SLLS) or scanning the detection point over the defect (SLD). Secondly, we discuss effects of Lamb waves interacting with V-shaped defects in thin samples. The results from these measurements have shown that the signal enhancement found in the near-field in both cases can be used to position the defect and gain an idea of its geometry, and have shown this to be a suitable fingerprint of the presence of the defect

Vapor-phase growth technique and system for several III-V compound semiconductors Interim scientific report

Vapor phase growth technique for III-V compound semiconductors containing aluminu