Impedance measurement using a two-microphone, random-excitation method

The feasibility of using a two-microphone, random-excitation technique for the measurement of acoustic impedance was studied. Equations were developed, including the effect of mean flow, which show that acoustic impedance is related to the pressure ratio and phase difference between two points in a duct carrying plane waves only. The impedances of a honeycomb ceramic specimen and a Helmholtz resonator were measured and compared with impedances obtained using the conventional standing-wave method. Agreement between the two methods was generally good. A sensitivity analysis was performed to pinpoint possible error sources and recommendations were made for future study. The two-microphone approach evaluated in this study appears to have some advantages over other impedance measuring techniques

Radiation from a Charge Uniformly Accelerated for All Time

A recent paper of Singal [Gen. Rel. Grav. 27 (1995), 953-967] argues that a uniformly accelerated particle does not radiate, in contradiction to the consensus of the research literature over the past 30 years. This note points out some questionable aspects of Singal's argument and shows how similar calculations can lead to the opposite conclusion.Comment: LaTeX, 9 pages, to appear in General Relativity and Gravitatio

The Role of New York City in the Economy of New York State

In August 2017, The Worker Institute convened high level leaders over the course of two days, around a discussion of Buffalo, NY Since the Great Recession. With presentations, panels, and a visit to the UAW Local 774, participants gained a deeper understanding of the economic restructuring that followed the Great Recession and where this large metropolitan area stands today. Here, you will find links to the resources that were presented during this two day convening

Targeted genome modifications in soybean with CRISPR/Cas9

Background: The ability to selectively alter genomic DNA sequences in vivo is a powerful tool for basic and applied research. The CRISPR/Cas9 system precisely mutates DNA sequences in a number of organisms. Here, the CRISPR/Cas9 system is shown to be effective in soybean by knocking-out a green fluorescent protein (GFP) transgene and modifying nine endogenous loci. Results: Targeted DNA mutations were detected in 95% of 88 hairy-root transgenic events analyzed. Bi-allelic mutations were detected in events transformed with eight of the nine targeting vectors. Small deletions were the most common type of mutation produced, although SNPs and short insertions were also observed. Homoeologous genes were successfully targeted singly and together, demonstrating that CRISPR/Cas9 can both selectively, and generally, target members of gene families. Somatic embryo cultures were also modified to enable the production of plants with heritable mutations, with the frequency of DNA modifications increasing with culture time. A novel cloning strategy and vector system based on In-Fusion (R) cloning was developed to simplify the production of CRISPR/Cas9 targeting vectors, which should be applicable for targeting any gene in any organism. Conclusions: The CRISPR/Cas9 is a simple, efficient, and highly specific genome editing tool in soybean. Although some vectors are more efficient than others, it is possible to edit duplicated genes relatively easily. The vectors and methods developed here will be useful for the application of CRISPR/Cas9 to soybean and other plant species

Evaluation of a scale-model experiment to investigate long-range acoustic propagation

Tests were conducted to evaluate the feasibility of using a scale-model experiment situated in an anechoic facility to investigate long-range sound propagation over ground terrain. For a nominal scale factor of 100:1, attenuations along a linear array of six microphones colinear with a continuous-wave type of sound source were measured over a wavelength range from 10 to 160 for a nominal test frequency of 10 kHz. Most tests were made for a hard model surface (plywood), but limited tests were also made for a soft model surface (plywood with felt). For grazing-incidence propagation over the hard surface, measured and predicted attenuation trends were consistent for microphone locations out to between 40 and 80 wavelengths. Beyond 80 wavelengths, significant variability was observed that was caused by disturbances in the propagation medium. Also, there was evidence of extraneous propagation-path contributions to data irregularities at more remote microphones. Sensitivity studies for the hard-surface and microphone indicated a 2.5 dB change in the relative excess attenuation for a systematic error in source and microphone elevations on the order of 1 mm. For the soft-surface model, no comparable sensitivity was found

Differential Resonant Ring YIG Tuned Oscillator

A differential SiGe oscillator circuit uses a resonant ring-oscillator topology in order to electronically tune the oscillator over multi-octave bandwidths. The oscillator s tuning is extremely linear, because the oscillator s frequency depends on the magnetic tuning of a YIG sphere, whose resonant frequency is equal to a fundamental constant times the DC magnetic field. This extremely simple circuit topology uses two coupling loops connecting a differential pair of SiGe bipolar transistors into a feedback configuration using a YIG tuned filter creating a closed-loop ring oscillator. SiGe device technology is used for this oscillator in order to keep the transistor s 1/f noise to an absolute minimum in order to achieve minimum RF phase noise. The single-end resonant ring oscillator currently has an advantage in fewer parts, but when the oscillation frequency is greater than 16 GHz, the package s parasitic behavior couples energy to the sphere and causes holes and poor phase noise performance. This is because the coupling to the YIG is extremely low, so that the oscillator operates at near the unloaded Q. With the differential resonant ring oscillator, the oscillation currents are just in the YIG coupling mechanisms. The phase noise is even better, and the physical size can be reduced to permit monolithic microwave integrated circuit oscillators. This invention is a YIG tuned oscillator circuit making use of a differential topology to simultaneously achieve an extremely broadband electronic tuning range and ultra-low phase noise. As a natural result of its differential circuit topology, all reactive elements, such as tuning stubs, which limit tuning bandwidth by contributing excessive open loop phase shift, have been eliminated. The differential oscillator s open-loop phase shift is associated with completely non-dispersive circuit elements such as the physical angle of the coupling loops, a differential loop crossover, and the high-frequency phase shift of the n-p-n transistors. At the input of the oscillator s feedback loop is a pair of differentially connected n-p-n SiGe transistors that provides extremely high gain, and because they are bulk-effect devices, extremely low 1/f noise (leading to ultralow RF phase noise). The 1/f corner frequency for n-p-n SiGe transistors is approximately 500 Hz. The RF energy from the transistor s collector output is connected directly to the top-coupling loop (the excitation loop) of a single-sphere YIG tuned filter. A uniform magnetic field to bias the YIG must be at a right angle to any vector associated with an RF current in a coupling loop in order for the precession to interact with the RF currents

Mixing Calculations in a Rotating Partitioned Pipe

We consider laminar mixing in a steady incompressible Newtonian fluid. Through the use of particle tracking methods and analogous techniques applicable to material element vectors on a given velocity field, residence time distributions, Poincare maps and material element deformations are computed; all of which are useful tools in determining the efficacy of a mixing system. We analyse the accuracy of using solenoidal flux-interpolating splines to represent the underlying velocity field as a basis for determining mixing efficiencies. As a test case we use a rotating partitioned pipe mixer for which an approximate Stokes velocity field is available. The Stokes representation provides us with a benchmark with which to assess the accuracy of the spline interpolants

Data handling methods and target detection results for multibeam and sidescan data collected as part of the search for SwissAir Flight 111

The crash of SwissAir Flight 111, off Nova Scotia in September 1998, triggered one of the largest seabed search surveys in Canadian history. The primary search tools used were sidescan sonars (both conventional and focussed types) and multibeam sonars. The processed search data needed to be distributed on a daily basis to other elements of the fleet for precise location of divers and other optical seabed search instruments (including laser linescan and ROV video). As a result of the glacial history of the region, many natural targets, similar in gross nature to aircraft debris were present. These included widespread linear bedrock outcrop patterns together with near ubiquitous glacial erratic boulders. Because of the severely broken-up nature of the remaining aircraft debris, sidescan imaging alone was often insufficient to unambiguously identify targets. The complementary attributes of higher resolution, but poorly located, sidescan imagery together with slightly lower resolution, but excellently navigated multibeam sonar proved to be one of critical factors in the success of the search. It proved necessary to rely heavily on the regional context of the seabed (provided by the multibeam sonar bathymetry and backscatter imagery) to separate natural geomorphic targets from anomalous anthropogenic debris. In order to confidently prove or disprove a potential target, the interpreter required simultaneous access to the full resolution sidescan data in the geographic context of the multibeam framework. Specific software tools had to be adapted or developed shipboard to provide this capability. Whilst developed specifically for this application, these survey tools can provide improved processing speed and confidence as part of more general mine hunting, hydrographic, engineering or scientific surveys

Particle tracking methods for residence time calculations in incompressible flow

Numerical methods are presented for the calculation of residence time distributions in steady incompressible fluid flow using a given set of normal fluid fluxes, defined across the cell faces of a cartesian tensor product mesh. A particle tracking approach is adopted involving the construction of a piecewise polynomial representation of the velocity distribution, and subsequent integration of this representation for the determination of individual particle trajectories