A Joint Calibration Technique for Improving Measurement Accuracy of Voltage and Current Probes During Synchronous Operation for RF Based Plasma Devices

This paper presents a joint calibration scheme for voltage (V) and current (I) probes that helps resolve accurately voltage-current phase differences even when the difference is very close to $90^{\circ}$. The latter has been a major issue with V-I probes when used with miniature RF plasma devices like the atmospheric pressure plasma jet (APPJ). Since the impedance of such miniature devices is predominantly capacitive, the phase difference between the voltage and current signals is very nearly $90^{\circ}$. It turns out, however, that when V-I probes are used with such devices without joint calibration, these frequently yield phase shifts over $90^{\circ}$. Also, since power absorption is proportional to the resistive part of the impedance it becomes very sensitive to the phase difference when it is close to $\approx90^{\circ}$. Thus, it is important to be able to resolve the phases accurately. Post-calibration, V-I probes would be indispensable for the electrical characterization of APPJs for determining average RF power $P_{av}$, plasma impedance $Z_p$, etc.Typical post-calibration V-I data yields, $Zp \approx 93.6 - j 1139 {\Omega} (81.5 - j 1173 {\Omega})$ at $P_{av} \approx 9.8 W$ $(\approx7.7 W)$ for helium (argon) gas.Comment: 18 pages, 3 figure

Influence of pulse modulation frequency on helium RF atmospheric pressure plasma jet characteristics

This work investigates the influence of pulse modulation frequency ranging from 50 Hz- 10 kHz on the helium RF atmospheric pressure plasma jet's fundamental characteristics. The impact of modulation frequency on plasma jet discharge behavior, geometrical variation, reactive species emission, and plasma parameters (gas temperature Tg, electron excitation temperature Texc, and electron density (ne) are studied using various diagnostics such as optical imaging, emission spectra, and thermal diagnostics. From the experiments, it is observed that operating the plasma jet at low pulse modulation frequencies (around 50 Hz) provides enhanced plasma dimensions, higher electron densities and greater optical emission from reactive species (viz., He I, O, OH, N2+, etc.) as compared to the higher modulation frequencies. Besides the low power consumption, the three times less gas temperature of the modulated plasma jet than the continuous wave mode makes it more advantageous for the applications. Moreover, the influence of duty cycle (D) and applied RF power (P) on the plasma jet characteristics are also discussed. It is found that 10- 40% duty cycle operation provides the most favorable attributes. More importantly, the concern of shorter plasma length in RF plasma jets is overcome by operating at 10- 20% duty cycle with increased applied power. This work thoroughly characterizes helium atmospheric pressure RF plasma jet with a wide range of pulse mode operating parameters, which could help select appropriate operating conditions for various industrial and biomedical applications.Comment: 24 pages, 11 figure

The burden of co-existing dermatological disorders and their tendency of being overlooked among patients admitted to muhimbili national hospital in Dar es Salaam, Tanzania

\ud Skin diseases are underestimated and overlooked by most clinicians despite being common in clinical practice. Many patients are hospitalized with co-existing dermatological conditions which may not be detected and managed by the attending physicians. The objective of this study was to determine the burden of co-existing and overlooked dermatological disorders among patients admitted to medical wards of Muhimbili National hospital in Dar es Salaam. A hospital-based descriptive cross-sectional study conducted at Muhimbili National hospital in Dar es Salaam, Tanzania. Patients were consecutively recruited from the medical wards. Detailed interview to obtain clinico-demographic characteristics was followed by a complete physical examination. Dermatological diagnoses were made mainly clinically. Appropriate confirmatory laboratory investigations were performed where necessary. Data was analyzed using the 'Statistical Package for Social Sciences' (SPSS) program version 10.0. A p-value of < 0.5 was statistically significant. Three hundred and ninety patients admitted to medical wards were enrolled into the study of whom, 221(56.7%) were females. The mean age was 36.7 ± 17.9 (range 7-84 years). Overall, 232/390 patients (59.5%) had co-existing dermatological disorders with 49% (191/390) having one, 9% (36/390) two and 5 patients (1%) three. A wide range of co-existing skin diseases was encountered, the most diverse being non-infectious conditions which together accounted for 36.4% (142/390) while infectious dermatoses accounted for 31.5% (123/390). The leading infectious skin diseases were superficial fungal infections accounting for 18%. Pruritic papular eruption of HIV/AIDS (PPE) and seborrheic eczema were the most common non-infectious conditions, each accounting for 4.3%. Of the 232/390 patients with dermatological disorders, 191/232 (82.3%) and 154/232 (66.3%) had been overlooked by their referring and admitting doctors respectively. Dermatological disorders are common among patients admitted to medical wards and many are not detected by their referring or admitting physicians. Basic dermatological education should be emphasized to improve knowledge and awareness among clinicians.\u

One-year outcomes of the ARTISAN-SNM study with the Axonics System for the treatment of urinary urgency incontinence

Aims: Sacral neuromodulation (SNM) is a guideline-recommended treatment for voiding dysfunction including urgency, urge incontinence, and nonobstructive retention as well

An Innovative Strategy for Dual Inhibitor Design and Its Application in Dual Inhibition of Human Thymidylate Synthase and Dihydrofolate Reductase Enzymes

Due to the diligence of inherent redundancy and robustness in many biological networks and pathways, multitarget inhibitors present a new prospect in the pharmaceutical industry for treatment of complex diseases. Nevertheless, to design multitarget inhibitors is concurrently a great challenge for medicinal chemists. We have developed a novel computational approach by integrating the affinity predictions from structure-based virtual screening with dual ligand-based pharmacophore to discover potential dual inhibitors of human Thymidylate synthase (hTS) and human dihydrofolate reductase (hDHFR). These are the key enzymes in folate metabolic pathway that is necessary for the biosynthesis of RNA,DNA, and protein. Their inhibition has found clinical utility as antitumor, antimicrobial, and antiprotozoal agents. A druglike database was utilized to perform dual-target docking studies. Hits identified through docking experiments were mapped over a dual pharmacophore which was developed from experimentally known dual inhibitors of hTS and hDHFR. Pharmacophore mapping procedure helped us in eliminating the compounds which do not possess basic chemical features necessary for dual inhibition. Finally, three structurally diverse hit compounds that showed key interactions at both activesites, mapped well upon the dual pharmacophore, and exhibited lowest binding energies were regarded as possible dual inhibitors of hTS and hDHFR. Furthermore, optimization studies were performed for final dual hit compound and eight optimized dual hits demonstrating excellent binding features at target systems were also regarded as possible dual inhibitors of hTS and hDHFR. In general, the strategy used in the current study could be a promising computational approach and may be generally applicable to other dual target drug designs

A Combination of Receptor-Based Pharmacophore Modeling & QM Techniques for Identification of Human Chymase Inhibitors

Inhibition of chymase is likely to divulge therapeutic ways for the treatment of cardiovascular diseases, and fibrotic disorders. To find novel and potent chymase inhibitors and to provide a new idea for drug design, we used both ligand-based and structure-based methods to perform the virtual screening(VS) of commercially available databases. Different pharmacophore models generated from various crystal structures of enzyme may depict diverse inhibitor binding modes. Therefore, multiple pharmacophore-based approach is applied in this study. X-ray crystallographic data of chymase in complex with different inhibitors were used to generate four structure–based pharmacophore models. One ligand–based pharmacophore model was also developed from experimentally known inhibitors. After successful validation, all pharmacophore models were employed in database screening to retrieve hits with novel chemical scaffolds. Drug-like hit compounds were subjected to molecular docking using GOLD and AutoDock. Finally four structurally diverse compounds with high GOLD score and binding affinity for several crystal structures of chymase were selected as final hits. Identification of final hits by three different pharmacophore models necessitates the use of multiple pharmacophore-based approach in VS process. Quantum mechanical calculation is also conducted for analysis of electrostatic characteristics of compounds which illustrates their significant role in driving the inhibitor to adopt a suitable bioactive conformation oriented in the active site of enzyme. In general, this study is used as example to illustrate how multiple pharmacophore approach can be useful in identifying structurally diverse hits which may bind to all possible bioactive conformations available in the active site of enzyme. The strategy used in the current study could be appropriate to design drugs for other enzymes as well

Insight the C-Site Pocket Conformational Changes Responsible for Sirtuin 2 Activity Using Molecular Dynamics Simulations

Sirtuin belongs to a family of typical histone deacetylase which regulates the fundamental cellular biological processes including gene expression, genome stability, mitosis, nutrient metabolism, aging, mitochondrial function, and cell motility. Michael et. al. reported that B-site mutation (Q167A and H187A) decreased the SIRT2 activity but still the structural changes were not reported. Hence, we performed 5 ns molecular dynamics (MD) simulation on SIRT2 Apo-form and complexes with substrate/NAD+ and inhibitor of wild type (WT), Q167A, and H187A. The results revealed that the assembly and disassembly of C-site induced by presence of substrate/NAD+ and inhibitor, respectively. This assembly and disassembly was mainly due to the interaction between the substrate/NAD+ and inhibitor and F96 and the distance between F96 and H187 which are present at the neck of the C-site. MD simulations suggest that the conformational change of L3 plays a major role in assembly and disassembly of C-site. Our current results strongly suggest that the distinct conformational change of L3 as well as the assembly and disassembly of C-site plays an important role in SIRT2 deacetylation function. Our study unveiled the structural changes of SIRT2 in presence of NAD+ and inhibitor which should be helpful to improve the inhibitory potency of SIRT2

Binding mode analyses and pharmacophore model development for stilbene derivatives as a novel and competitive class of α-glucosidase inhibitors

Stilbene urea derivatives as a novel and competitive class of non-glycosidic α-glucosidase inhibitors are effective for the treatment of type II diabetes and obesity. The main purposes of our molecular modeling study are to explore the most suitable binding poses of stilbene derivatives with analyzing the binding affinity differences and finally to develop a pharmacophore model which would represents critical features responsible for α-glucosidase inhibitory activity. Three-dimensional structure of S. cerevisiae α-glucosidase was built by homology modeling method and the structure was used for the molecular docking study to find out the initial binding mode of compound 12, which is the most highly active one. The initial structure was subjected to molecular dynamics (MD) simulations for protein structure adjustment at compound 12-bound state. Based on the adjusted conformation, the more reasonable binding modes of the stilbene urea derivatives were obtained from molecular docking and MD simulations. The binding mode of the derivatives was validated by correlation analysis between experimental Ki value and interaction energy. Our results revealed that the binding modes of the potent inhibitors were engaged with important hydrogen bond, hydrophobic, and π-interactions. With the validated compound 12-bound structure obtained from combining approach of docking and MD simulation, a proper four featured pharmacophore model was generated. It was also validated by comparison of fit values with the Ki values. Thus, these results will be helpful for understanding the relationship between binding mode and bioactivity and for designing better inhibitors from stilbene derivatives

Molecular Dynamics Simulation Study and Hybrid Pharmacophore Model Development in Human LTA4H Inhibitor Design

Human leukotriene A4 hydrolase (hLTA4H) is a bi-functional enzyme catalyzes the hydrolase and aminopeptidase functions upon the fatty acid and peptide substrates, respectively, utilizing the same but overlapping binding site. Particularly the hydrolase function of this enzyme catalyzes the rate-limiting step of the leukotriene (LT) cascade that converts the LTA4 to LTB4. This product is a potent pro-inflammatory activator of inflammatory responses and thus blocking this conversion provides a valuable means to design anti-inflammatory agents. Four structurally very similar chemical compounds with highly different inhibitory profile towards the hydrolase function of hLTA4H were selected from the literature. Molecular dynamics (MD) simulations of the complexes of hLTA4H with these inhibitors were performed and the results have provided valuable information explaining the reasons for the differences in their biological activities. Binding mode analysis revealed that the additional thiophene moiety of most active inhibitor helps the pyrrolidine moiety to interact the most important R563 and K565 residues. The hLTA4H complexes with the most active compound and substrate were utilized in the development of hybrid pharmacophore models. These developed pharmacophore models were used in screening chemical databases in order to identify lead candidates to design potent hLTA4H inhibitors. Final evaluation based on molecular docking and electronic parameters has identified three compounds of diverse chemical scaffolds as potential leads to be used in novel and potent hLTA4H inhibitor design