1,322 research outputs found
Design of a 3D photonic band gap cavity in a diamond-like inverse woodpile photonic crystal
We theoretically investigate the design of cavities in a three-dimensional
(3D) inverse woodpile photonic crystal. This class of cubic diamond-like
crystals has a very broad photonic band gap and consists of two perpendicular
arrays of pores with a rectangular structure. The point defect that acts as a
cavity is centred on the intersection of two intersecting perpendicular pores
with a radius that differs from the ones in the bulk of the crystal. We have
performed supercell bandstructure calculations with up to
unit cells. We find that up to five isolated and dispersionless bands appear
within the 3D photonic band gap. For each isolated band, the electric-field
energy is localized in a volume centred on the point defect, hence the point
defect acts as a 3D photonic band gap cavity. The mode volume of the cavities
resonances is as small as 0.8 (resonance wavelength cubed),
indicating a strong confinement of the light. By varying the radius of the
defect pores we found that only donor-like resonances appear for smaller defect
radius, whereas no acceptor-like resonances appear for greater defect radius.
From a 3D plot of the distribution of the electric-field energy density we
conclude that peaks of energy found in sharp edges situated at the point
defect, similar to how electrons collect at such features. This is different
from what is observed for cavities in non-inverted woodpile structures. Since
inverse woodpile crystals can be fabricated from silicon by CMOS-compatible
means, we project that single cavities and even cavity arrays can be realized,
for wavelength ranges compatible with telecommunication windows in the near
infrared.Comment: 11 figure
Simulating three dimensional self-assembly of shape modified particles using magnetic dipolar forces
The feasibility of 3D self-assembly of milli-magnetic particles that interact via magnetic dipolar forces is investigated. Typically magnetic particles, such as isotropic spheres, self-organize in stable 2D configurations. By modifying the shape of the particles, 3D self-assembly may be enabled. The design of the particles and the experimental setup are presented. The magnetic configurations of simple particle arrangements are obtained via energy minimization in simulations. The simulations show that a 3D configuration can become energetically favourable over 2D configurations, if the shape of the particle is modified
Signature of a three-dimensional photonic band gap observed on silicon inverse woodpile photonic crystals
We have studied the reflectivity of CMOS-compatible three-dimensional silicon
inverse woodpile photonic crystals at near-infrared frequencies.
Polarization-resolved reflectivity spectra were obtained from two orthogonal
crystal surfaces corresponding to 1.88 pi sr solid angle. The spectra reveal
broad peaks with high reflectivity up to 67 % that are independent of the
spatial position on the crystals. The spectrally overlapping reflectivity peaks
for all directions and polarizations form the signature of a broad photonic
band gap with a relative bandwidth up to 16 %. This signature is supported with
stopgaps in plane wave bandstructure calculations and with the frequency region
of the expected band gap.Comment: 9 pages, 5 figure
The Sloan Lens ACS Survey. VI: Discovery and analysis of a double Einstein ring
We report the discovery of two concentric Einstein rings around the
gravitational lens SDSSJ0946+1006, as part of the Sloan Lens ACS Survey. The
main lens is at redshift zl=0.222, while the inner ring (1) is at zs1=0.609 and
Einstein radius . The wider image separation () of the outer ring (2) implies that it is at higher redshift. Its
detection in the F814W filter implies zs2<6.9. The configuration can be well
described by a total density profile with
and velocity dispersion \sigma_{SIE}=287\pm5\kms. [...] We consider whether
this configuration can be used to constrain cosmological parameters exploiting
angular distance ratios entering the lens equations. Constraints for
SDSSJ0946+1006, are uninteresting due to the sub-optimal lens and source
redshifts. We then consider the perturbing effect of the mass associated with
Ring 1 building a double lens plane compound lens model. This introduces minor
changes to the mass of the main lens and allows to estimate the mass of Ring 1
(\sigma_{SIE,s1}=94\pm30\kms). We examine the prospects of doing cosmography
with a sample of 50 double lenses, expected from future space based surveys
such as DUNE or JDEM. Taking full account of the model uncertainties, such a
sample could be used to measure and with 10% accuracy, for a
flat cosmology
Comparison of acute non-visual bright light responses in patients with optic nerve disease, glaucoma and healthy controls.
This study examined the effect of optic nerve disease, hence retinal ganglion cell loss, on non-visual functions related to melanopsin signalling. Test subjects were patients with bilateral visual loss and optic atrophy from either hereditary optic neuropathy (nâ=â11) or glaucoma (nâ=â11). We measured melatonin suppression, subjective sleepiness and cognitive functions in response to bright light exposure in the evening. We also quantified the post-illumination pupil response to a blue light stimulus. All results were compared to age-matched controls (nâ=â22). Both groups of patients showed similar melatonin suppression when compared to their controls. Greater melatonin suppression was intra-individually correlated to larger post-illumination pupil response in patients and controls. Only the glaucoma patients demonstrated a relative attenuation of their pupil response. In addition, they were sleepier with slower reaction times during nocturnal light exposure. In conclusion, glaucomatous, but not hereditary, optic neuropathy is associated with reduced acute light effects. At mild to moderate stages of disease, this is detected only in the pupil function and not in responses conveyed via the retinohypothalamic tract such as melatonin suppression
AB-QTL analysis in winter wheat: I. Synthetic hexaploid wheat ( T. turgidum ssp. dicoccoides Ă T. tauschii ) as a source of favourable alleles for milling and baking quality traits
Cross-talk between signaling pathways leading to defense against pathogens and insects
In nature, plants interact with a wide range of organisms, some of which
are harmful (e.g. pathogens, herbivorous insects), while others are beneficial
(e.g. growth-promoting rhizobacteria, mycorrhizal fungi, and predatory
enemies of herbivores). During the evolutionary arms race between plants
and their attackers, primary and secondary immune responses evolved to
recognize common or highly specialized features of microbial pathogens
(Chisholm et al., 2006), resulting in sophisticated mechanisms of defense
A More Fundamental Plane
We combine strong-lensing masses with SDSS stellar velocity dispersions and
HST-ACS effective (half-light) radii for 36 lens galaxies from the Sloan Lens
ACS (SLACS) Survey to study the mass dependence of mass-dynamical structure in
early-type galaxies. We find that over a 180--390 km/s range in velocity
dispersion, structure is independent of lensing mass to within 5%. This result
suggests a systematic variation in the total (i.e., luminous plus dark matter)
mass-to-light ratio as the origin of the tilt of the fundamental plane (FP)
scaling relationship between galaxy size, velocity dispersion, and surface
brightness. We construct the FP of the lens sample, which we find to be
consistent with the FP of the parent SDSS early-type galaxy population, and
present the first observational correlation between mass-to-light ratio and
residuals about the FP. Finally, we re-formulate the FP in terms of surface
mass density rather than surface brightness. By removing the complexities of
stellar-population effects, this mass-plane formulation will facilitate
comparison to numerical simulations and possible use as a cosmological distance
indicator.Comment: 4+epsilon pages, 1 figure, emulateapj. Revised version accepted for
publication in the ApJ Letter
Young's modulus and residual stress of GeSbTe phase-change thin films
The mechanical properties of phase change materials alter when the phase is transformed. In this paper, we report on experiments that determine the change in crucial parameters such as Young's modulus and residual stress for two of the most widely employed compositions of phase change films, Ge1Sb2Te4 and Ge2Sb2Te5, using an accurate microcantilever methodology. The results support understanding of the exact mechanisms that account for the phase transition, especially with regard to stress, which leads to drift in non-volatile data storage. Moreover, detailed information on the change in mechanical properties will enable the design of novel low-power nonvolatile MEMS
- âŠ