Magnetic and electric field meters developed for the US Department of Energy

This report describes work done at the Jet Propulsion Laboratory for the Office of Energy Storage and Distribution of DOE on the measurement of power line fields. A magnetic field meter is discussed that uses fiber optics to couple a small measuring probe to a remote readout device. The use of fiber optics minimizes electric field perturbation due to the presence of the probe and provides electric isolation for the probe, so that it could be used in a high field or high voltage environment. Power to operate the sensor electronics is transferred via an optical fiber, and converted to electrical form by a small photodiode array. The fundamental, the second and third harmonics of the field are filtered and separately measured, as well as the broadband rms level of the field. The design of the meter is described in detail and data from laboratory tests are presented. The report also describes work done to improve the performance of a DC bushing in a Swedish factory, using the improved meter. The DC electric fields are measured with synchronous detection to provide field magnitude data in two component directions

Clinical and radiological recurrence after childhood arterial ischemic stroke

Background: Data on rates and risk factors for clinical and radiological recurrence of childhood arterial ischemic stroke (AIS) might inform secondary prevention strategies. Methods and Results: Consecutive Great Ormond Street Hospital patients with first AIS were identified retrospectively (1978–1990) and prospectively (1990–2000). Patients underwent repeat neuroimaging at the time of clinical recurrence or, if asymptomatic, at least 1 year after AIS. Cox and logistic regression analyses were used to explore the relationships between risk factors and clinical and radiological recurrence, respectively. A total of 212 patients were identified, of whom 97 had another prior diagnosis. Seventy-nine children had a clinical recurrence (29 strokes, 46 transient ischemic attacks [TIAs], 4 deaths with reinfarction 1 day to 11.5 years (median 267 days) later); after 5 years, 59% (95% confidence interval, 51% to 67%) were recurrence free. Moyamoya on angiography and low birth weight were independently associated with clinical recurrence in the whole group. Genetic thrombophilia was associated with clinical recurrence in previously healthy patients, independent of the presence of moyamoya. Sixty of 179 patients who had repeat neuroimaging had radiological reinfarction, which was clinically silent in 20. Previous TIA, bilateral infarction, prior diagnosis (specifically immunodeficiency), and leukocytosis were independently associated with reinfarction. Previous TIA and leukocytosis were also independently associated with clinically silent reinfarction. Conclusions: Clinical and radiological recurrence are common after childhood AIS. The risk of clinical recurrence is increased in children with moyamoya and, in previously healthy patients, in those with genetic thrombophilia. Preexisting pathology, including immunodeficiency, and persistent leukocytosis are risk factors for radiological recurrence, which suggests a potential role for chronic infection

Distribution automation applications of fiber optics

Motivations for interest and research in distribution automation are discussed. The communication requirements of distribution automation are examined and shown to exceed the capabilities of power line carrier, radio, and telephone systems. A fiber optic based communication system is described that is co-located with the distribution system and that could satisfy the data rate and reliability requirements. A cost comparison shows that it could be constructed at a cost that is similar to that of a power line carrier system. The requirements for fiber optic sensors for distribution automation are discussed. The design of a data link suitable for optically-powered electronic sensing is presented. Empirical results are given. A modeling technique that was used to understand the reflections of guided light from a variety of surfaces is described. An optical position-indicator design is discussed. Systems aspects of distribution automation are discussed, in particular, the lack of interface, communications, and data standards. The economics of distribution automation are examined

Distribution system simulator

In a series of tests performed under the Department of Energy auspices, power line carrier propagation was observed to be anomalous under certain circumstances. To investigate the cause, a distribution system simulator was constructed. The simulator was a physical simulator that accurately represented the distribution system from below power frequency to above 50 kHz. Effects such as phase-to-phase coupling and skin effect were modeled. Construction details of the simulator, and experimental results from its use are presented

Making sense of the case law on Ombudsman schemes

This article analyses the case law on ombudsman schemes in the UK, with the purpose of identifying some of the key trends that underpin this branch of law pre-the first Supreme Court decision in this area, JR55 v Northern Ireland Commissioner for Complaints. While the law on ombudsman schemes remains based on legislation and the various grounds of administrative law available in judicial review, distinct bespoke principles have also been relied upon. These principles are beginning to provide consistent guidance on how the law should be used and interpreted in cases involving an ombudsman scheme. One task of the Supreme Court in JR55 will be to confirm these principles, or rationalize any departure from them

Investigating soil-water retention characteristics at high suctions using Relative Humidity control

A technique for controlling relative humidity (RH) is presented, which involves supplying a sealed chamber with a continuous flow of air at a computer-regulated RH. The desired value of RH is achieved by mixing dry and wet air at appropriate volumes and is measured for servo-control at three locations in the chamber with capacitive RH sensors and checked with a sensitive VAISALA sensor. The setup is capable of controlling RH steadily and continuously with a deviation of less than 0.2% RH. The technique was adopted to determine wetting soil-water retention curves (SWRC) of statically compacted London Clay, under both free-swelling and constant volume conditions. The RH within the chamber was increased in a step-wise fashion, with each step maintained until vapour equilibrium between the chamber atmosphere and the soil samples was established. Independent filter paper measurements further validate the method, while the obtained retention curves complement those available in the literature for lower ranges of suction

The common law theory and practice of the ombudsman/judiciary relationship

In both Australia and the United Kingdom, the ombudsman sector plays a specific role in the oversight of the administration of government, but there exists no clear overarching theoretical framework within which the institution is aligned with common law constitutionalism. An ombudsman’s functionality is secured by gaining legal authority from parliament and effective power through executive acquiescence, but simultaneously to function effectively it must maintain a degree of separation from the executive and parliament. This situation creates a regulatory gap which the courts fill by acting in a supervisory relationship over the ombudsman sector. In turn, this raises the danger that the legitimacy gained through judicial oversight results in a loss of flexibility and uniqueness in the ombudsman institution. Through an empirical study of the case law on the sector, this article confirms that the courts have shaped and legitimised the role of the ombudsman institution under the common law constitution. Yet this study also suggests that there is a risk that over-reliance upon the judiciary to perform a retrospective, reactive and intermittent control function can lead to an inappropriate imposition of judicial values on the ombudsman sector as well as the courts performing an unsuited regulatory role

Power system applications of fiber optic sensors

This document is a progress report of work done in 1985 on the Communications and Control for Electric Power Systems Project at the Jet Propulsion Laboratory. These topics are covered: Electric Field Measurement, Fiber Optic Temperature Sensing, and Optical Power transfer. Work was done on the measurement of ac and dc electric fields. A prototype sensor for measuring alternating fields was made using a very simple electroscope approach. An electronic field mill sensor for dc fields was made using a fiber optic readout, so that the entire probe could be operated isolated from ground. There are several instances in which more precise knowledge of the temperature of electrical power apparatus would be useful. This report describes a number of methods whereby the distributed temperature profile can be obtained using a fiber optic sensor. The ability to energize electronics by means of an optical fiber has the advantage that electrical isolation is maintained at low cost. In order to accomplish this, it is necessary to convert the light energy into electrical form by means of photovoltaic cells. JPL has developed an array of PV cells in gallium arsenide specifically for this purpose. This work is described

Power system applications of fiber optics

Power system applications of optical systems, primarily using fiber optics, are reviewed. The first section reviews fibers as components of communication systems. The second section deals with fiber sensors for power systems, reviewing the many ways light sources and fibers can be combined to make measurements. Methods of measuring electric field gradient are discussed. Optical data processing is the subject of the third section, which begins by reviewing some widely different examples and concludes by outlining some potential applications in power systems: fault location in transformers, optical switching for light fired thyristors and fault detection based on the inherent symmetry of most power apparatus. The fourth and final section is concerned with using optical fibers to transmit power to electric equipment in a high voltage situation, potentially replacing expensive high voltage low power transformers. JPL has designed small photodiodes specifically for this purpose, and fabricated and tested several samples. This work is described