Particle fallout/activity sensor

A particle fallout/activity sensor measures relative amounts of dust or other particles which collect on a mirror in an area to be monitored. The sensor includes a sensor module and a data acquisition module, both of which can be operated independently of one another or in combination with one another. The sensor module includes a housing containing the mirror, an LED assembly for illuminating the mirror and an optical detector assembly for detecting light scattered off of the mirror by dust or other particles collected thereon. A microprocessor controls operation of the sensor module's components and displays results of a measurement on an LCD display mounted on the housing. A push button switch is also mounted on the housing which permits manual initiation of a measurement. The housing is constructed of light absorbing material, such as black delrin, which minimizes detection of light by the optical detector assembly other than that scattered by dust or particles on the mirror. The data acquisition module can be connected to the sensor module and includes its own microprocessor, a timekeeper and other digital circuitry for causing the sensor module to make a measurement periodically and send the measurement data to the data acquisition module for display and storage in memory for later retrieval and transfer to a separate computer. The time tagged measurement data can also be used to determine the relative level of activity in the monitored area since this level is directly related to the amount of dust or particle fallout in the area

Spin-Charge-Lattice Coupling through Resonant Multi-Magnon Excitations in Multiferroic BiFeO3

Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These are shown to be collective interactions between on-site Fe d-d electronic resonance, phonons and multimagnonsComment: 11 pages including figure

Grain size-dependent magnetic and electric properties in nanosized YMnO3 multiferroic ceramics

Magnetic and electric properties are investigated for the nanosized YMnO3 samples with different grain sizes (25 nm to 200 nm) synthesized by a modified Pechini method. It shows that magnetic and electric properties are strongly dependent on the grain size. The magnetic characterization indicates that with increasing grain size, the antiferromagnetic (AFM) transition temperature increases from 52 to 74 K. A corresponding shift of the dielectric anomaly is observed, indicating a strong correlation between the electric polarization and the magnetic ordering. Further analysis suggests that the rising of AFM transition temperature with increasing grain size should be from the structural origin, in which the strength of AFM interaction as well as the electrical polarization is dependent on the in-plane lattice parameters. Furthermore, among all samples, the sample with grain size of 95 nm is found to have the smallest leakage current density (< 1 μA/cm2)

FORUM:Remote testing for psychological and physiological acoustics

Acoustics research involving human participants typically takes place in specialized laboratory settings. Listening studies, for example, may present controlled sounds using calibrated transducers in sound-attenuating or anechoic chambers. In contrast, remote testing takes place outside of the laboratory in everyday settings (e.g., participants' homes). Remote testing could provide greater access to participants, larger sample sizes, and opportunities to characterize performance in typical listening environments at the cost of reduced control of environmental conditions, less precise calibration, and inconsistency in attentional state and/or response behaviors from relatively smaller sample sizes and unintuitive experimental tasks. The Acoustical Society of America Technical Committee on Psychological and Physiological Acoustics launched the Task Force on Remote Testing (https://tcppasa.org/remotetesting/) in May 2020 with goals of surveying approaches and platforms available to support remote testing and identifying challenges and considerations for prospective investigators. The results of this task force survey were made available online in the form of a set of Wiki pages and summarized in this report. This report outlines the state-of-the-art of remote testing in auditory-related research as of August 2021, which is based on the Wiki and a literature search of papers published in this area since 2020, and provides three case studies to demonstrate feasibility during practice

Crystal coherence length effects on the infrared optical response of MgO thin films

The role of crystal coherence length on the infrared optical response of MgO thin films was investigated with regard to Reststrahlen band photon-phonon coupling. Preferentially (001)-oriented sputtered and evaporated ion-beam assisted deposited thin films were prepared on silicon and annealed to vary film microstructure. Film crystalline coherence was characterized by x-ray diffraction line broadening and transmission electron microscopy. The infrared dielectric response revealed a strong dependence of dielectric resonance magnitude on crystalline coherence. Shifts to lower transverse optical phonon frequencies were observed with increased crystalline coherence. Increased optical phonon damping is attributed to increasing granularity and intergrain misorientation

Lunar Water Resource Demonstration (LWRD) Test Results

No abstract availabl

Cueing listeners to attend to a target talker progressively improves word report as the duration of the cue-target interval lengthens to 2000 ms

Endogenous attention is typically studied by presenting instructive cues in advance of a target stimulus array. For endogenous visual attention, task performance improves as the duration of the cue-target interval increases up to 800 ms. Less is known about how endogenous auditory attention unfolds over time or the mechanisms by which an instructive cue presented in advance of an auditory array improves performance. The current experiment used five cue-target intervals (0, 250, 500, 1000, and 2000 ms) to compare four hypotheses for how preparatory attention develops over time in a multi-talker listening task. Young adults were cued to attend to a target talker who spoke in a mixture of three talkers. Visual cues indicated the target talker’s spatial location or their gender. Participants directed attention to location and gender simultaneously (‘objects’) at all cue-target intervals. Participants were consistently faster and more accurate at reporting words spoken by the target talker when the cue-target interval was 2000 ms than 0 ms. In addition, the latency of correct responses progressively shortened as the duration of the cue-target interval increased from 0 to 2000 ms. These findings suggest that the mechanisms involved in preparatory auditory attention develop gradually over time, taking at least 2000 ms to reach optimal configuration, yet providing cumulative improvements in speech intelligibility as the duration of the cue-target interval increases from 0 to 2000 ms. These results demonstrate an improvement in performance for cue-target intervals longer than those that have been reported previously in the visual or auditory modalities

Across-frequency combination of interaural time difference in bilateral cochlear implant listeners.

The current study examined how cochlear implant (CI) listeners combine temporally interleaved envelope-ITD information across two sites of stimulation. When two cochlear sites jointly transmit ITD information, one possibility is that CI listeners can extract the most reliable ITD cues available. As a result, ITD sensitivity would be sustained or enhanced compared to single-site stimulation. Alternatively, mutual interference across multiple sites of ITD stimulation could worsen dual-site performance compared to listening to the better of two electrode pairs. Two experiments used direct stimulation to examine how CI users can integrate ITDs across two pairs of electrodes. Experiment 1 tested ITD discrimination for two stimulation sites using 100-Hz sinusoidally modulated 1000-pps-carrier pulse trains. Experiment 2 used the same stimuli ramped with 100 ms windows, as a control condition with minimized onset cues. For all stimuli, performance improved monotonically with increasing modulation depth. Results show that when CI listeners are stimulated with electrode pairs at two cochlear sites, sensitivity to ITDs was similar to that seen when only the electrode pair with better sensitivity was activated. None of the listeners showed a decrement in performance from the worse electrode pair. This could be achieved either by listening to the better electrode pair or by truly integrating the information across cochlear sites

Selective and divided attention: Extracting information from simultaneous sound sources

Presented at the 10th International Conference on Auditory Display (ICAD2004)The way in which sounds interact and interfere with each other (both acoustically and perceptually) has an important influence on how well an auditory display can convey information. While spatial separation of simultaneous sound sources has been shown to be very effective when a listener must report the content of one source and ignore another source (a condition known as selective attention), little is known about how spatial separation influences performance in divided-attention tasks, i.e., tasks in which the listener must report the content of more than one simultaneous source. This paper reports preliminary results from a pilot study investigating how perceived spatial separation of sources and consistency in source locations influences performance on selective- and divided-attention tasks. Results demonstrate that 1) in both selective- and divided-attention tasks, overall performance is generally better when sources are perceived at different locations than when they are perceived at the same location; 2) in both selective- and divided-attention tasks, randomly changing the perceived source locations from trial to trial tends to degrade performance compared to conditions where the source locations are fixed; and 3) both of the above effects are larger for selective-attention tasks than dividedattention tasks