579 research outputs found

    2D-IR Study of a Photoswitchable Isotope-Labeled α-Helix

    Full text link
    A series of photoswitchable, α-helical peptides were studied using two-dimensional infrared spectroscopy (2D-IR). Single-isotope labeling with 13C18O at various positions in the sequence was employed to spectrally isolate particular backbone positions. We show that a single 13C18O label can give rise to two bands along the diagonal of the 2D-IR spectrum, one of which is from an amide group that is hydrogen-bonded internally, or to a solvent molecule, and the other from a non-hydrogen-bonded amide group. The photoswitch enabled examination of both the folded and unfolded state of the helix. For most sites, unfolding of the peptide caused a shift of intensity from the hydrogen-bonded peak to the non-hydrogen-bonded peak. The relative intensity of the two diagonal peaks gives an indication of the fraction of molecules hydrogen-bonded at a certain location along the sequence. As this fraction varies quite substantially along the helix, we conclude that the helix is not uniformly folded. Furthermore, the shift in hydrogen bonding is much smaller than the change of helicity measured by CD spectroscopy, indicating that non-native hydrogen-bonded or mis-folded loops are formed in the unfolded ensemble

    Excitation energy transfer in native and unstacked thylakoid membranes studied by low temperature and ultrafast fluorescence spectroscopy

    Get PDF
    In this work, the transfer of excitation energy was studied in native and cation-depletion induced, unstacked thylakoid membranes of spinach by steady-state and time-resolved fluorescence spectroscopy. Fluorescence emission spectra at 5 K show an increase in photosystem I (PSI) emission upon unstacking, which suggests an increase of its antenna size. Fluorescence excitation measurements at 77 K indicate that the increase of PSI emission upon unstacking is caused both by a direct spillover from the photosystem II (PSII) core antenna and by a functional association of light-harvesting complex II (LHCII) to PSI, which is most likely caused by the formation of LHCII-LHCI-PSI supercomplexes. Time-resolved fluorescence measurements, both at room temperature and at 77 K, reveal differences in the fluorescence decay kinetics of stacked and unstacked membranes. Energy transfer between LHCII and PSI is observed to take place within 25 ps at room temperature and within 38 ps at 77 K, consistent with the formation of LHCII-LHCI-PSI supercomplexes. At the 150-160 ps timescale, both energy transfer from LHCII to PSI as well as spillover from the core antenna of PSII to PSI is shown to occur at 77 K. At room temperature the spillover and energy transfer to PSI is less clear at the 150 ps timescale, because these processes compete with charge separation in the PSII reaction center, which also takes place at a timescale of about 150 ps. © 2007 Springer Science+Business Media B.V

    Excitons in a Photosynthetic Light-Harvesting System: A Combined Molecular Dynamics/Quantum Chemistry and Polaron Model Study

    Get PDF
    The dynamics of pigment-pigment and pigment-protein interactions in light-harvesting complexes is studied with a novel approach which combines molecular dynamics (MD) simulations with quantum chemistry (QC) calculations. The MD simulations of an LH-II complex, solvated and embedded in a lipid bilayer at physiological conditions (with total system size of 87,055 atoms) revealed a pathway of a water molecule into the B800 binding site, as well as increased dimerization within the B850 BChl ring, as compared to the dimerization found for the crystal structure. The fluctuations of pigment (B850 BChl) excitation energies, as a function of time, were determined via ab initio QC calculations based on the geometries that emerged from the MD simulations. From the results of these calculations we constructed a time-dependent Hamiltonian of the B850 exciton system from which we determined the linear absorption spectrum. Finally, a polaron model is introduced to describe quantum mechanically both the excitonic and vibrational (phonon) degrees of freedom. The exciton-phonon coupling that enters into the polaron model, and the corresponding phonon spectral function are derived from the MD/QC simulations. It is demonstrated that, in the framework of the polaron model, the absorption spectrum of the B850 excitons can be calculated from the autocorrelation function of the excitation energies of individual BChls, which is readily available from the combined MD/QC simulations. The obtained result is in good agreement with the experimentally measured absorption spectrum.Comment: REVTeX3.1, 23 pages, 13 (EPS) figures included. A high quality PDF file of the paper is available at http://www.ks.uiuc.edu/Publications/Papers/PDF/DAMJ2001/DAMJ2001.pd

    Discovering study-specific gene regulatory networks

    Get PDF
    This article has been made available through the Brunel Open Access Publishing Fund.Microarrays are commonly used in biology because of their ability to simultaneously measure thousands of genes under different conditions. Due to their structure, typically containing a high amount of variables but far fewer samples, scalable network analysis techniques are often employed. In particular, consensus approaches have been recently used that combine multiple microarray studies in order to find networks that are more robust. The purpose of this paper, however, is to combine multiple microarray studies to automatically identify subnetworks that are distinctive to specific experimental conditions rather than common to them all. To better understand key regulatory mechanisms and how they change under different conditions, we derive unique networks from multiple independent networks built using glasso which goes beyond standard correlations. This involves calculating cluster prediction accuracies to detect the most predictive genes for a specific set of conditions. We differentiate between accuracies calculated using cross-validation within a selected cluster of studies (the intra prediction accuracy) and those calculated on a set of independent studies belonging to different study clusters (inter prediction accuracy). Finally, we compare our method's results to related state-of-the art techniques. We explore how the proposed pipeline performs on both synthetic data and real data (wheat and Fusarium). Our results show that subnetworks can be identified reliably that are specific to subsets of studies and that these networks reflect key mechanisms that are fundamental to the experimental conditions in each of those subsets

    Tips and turns of bacteriophytochrome photoactivation

    Get PDF
    Phytochromes are ubiquitous photosensor proteins, which control the growth, reproduction and movement in plants, fungi and bacteria. Phytochromes switch between two photophysical states depending on the light conditions. In analogy to molecular machines, light absorption induces a series of structural changes that are transduced from the bilin chromophore, through the protein, and to the output domains. Recent progress towards understanding this structural mechanism of signal transduction has been manifold. We describe this progress with a focus on bacteriophytochromes. We describe the mechanism along three structural tiers, which are the chromophore-binding pocket, the photosensory module, and the output domains. We discuss possible interconnections between the tiers and conclude by presenting future directions and open questions. We hope that this review may serve as a compendium to guide future structural and spectroscopic studies designed to understand structural signaling in phytochromes.Peer reviewe

    Dielectrophoresis of nanoscale dsDNA and humidity effects on its electrical conductivity

    Get PDF
    The dielectrophoresis method for trapping and attaching nanoscale double-stranded DNA between nanoelectrodes was developed. The method gives a high yield of trapping single or a few molecules only which enables transport measurements at the single molecule level. Electrical conductivity of individual 140-nm-long DNA molecules was measured, showing insulating behavior in dry conditions. In contrast, clear enhancement of conductivity was observed in moist conditions, relating to the interplay between the conformation of DNA molecules and their conductivity.Comment: 4 pages, 2 figure

    Structure and regulation of mammalian S-adenosylmethionine decarboxylase

    Get PDF
    In order to understand the structure and regulation of S-adenosylmethionine decarboxylase, cDNA clones encoding this enzyme have been isolated from rat prostate and human fibroblast cDNA libraries. The authenticity of the cDNAs was verified by: (a) transfecting the Chinese hamster ovary cells with the human cDNA in the pcD vector which resulted in a transient 10-20-fold increase in S-adenosylmethionine decarboxylase activity in recipient cells; and (b) translating the mRNA formed by transcription of the cDNA insert in a reticulocyte lysate and recording an increase in S-adenosylmethionine decarboxylase activity. The amino acid sequences deduced from the cDNAs indicate that the human proenzyme for this protein contains 334 amino acids and has a molecular weight of 38,331 whereas the rat proenzyme contains 333 amino acid residues. The human and rat enzymes are very similar having only 11 amino acid differences and the cDNAs are also closely related showing over 90% homology in the 1617-nucleotide overlap which was sequenced. A further indication of the highly conserved nature of mammalian S-adenosylmethionine decarboxylases is that the amino acid sequences deduced from the human and the rat cDNAs contained peptide sequences identical to those previously reported for the purified bovine enzyme. In vitro transcription/translation experiments showed that the proenzyme is converted to two polypeptides of molecular weights about 32,000 and 6,000 in a processing reaction which generates the prosthetic pyruvate group and that the final enzyme contains both polypeptides. Two forms of S-adenosylmethionine decarboxylase mRNA (2.1 and about 3.4-3.6 kilobases) are present in human and rodent tissues and may originate from the utilization of two different polyadenylation signals. Southern blots of rat genomic DNA indicated that the S-adenosylmethionine decarboxylase gene belongs to a multigene family. Depletion of cellular polyamines by inhibitors or ornithine decarboxylase or the aminopropyltransferases led to an increase in the content of S-adenosylmethionine decarboxylase protein and mRNA, but the elevation in the mRNA was not sufficient to account for all of the change in the enzyme level, particularly in cells in which spermine was depleted

    Structural and Functional Dynamics of Staphylococcus aureus Biofilms and Biofilm Matrix Proteins on Different Clinical Materials

    Get PDF
    Medical device-associated staphylococcal infections are a common and challenging problem. However, detailed knowledge of staphylococcal biofilm dynamics on clinically relevant surfaces is still limited. In the present study, biofilm formation of the Staphylococcus aureus ATCC 25923 strain was studied on clinically relevant materials—borosilicate glass, plexiglass, hydroxyapatite, titanium and polystyrene—at 18, 42 and 66 h. Materials with the highest surface roughness and porosity (hydroxyapatite and plexiglass) did not promote biofilm formation as efficiently as some other selected materials. Matrix-associated poly-N-acetyl-β-(1-6)-glucosamine (PNAG) was considered important in young (18 h) biofilms, whereas proteins appeared to play a more important role at later stages of biofilm development. A total of 460 proteins were identified from biofilm matrices formed on the indicated materials and time points—from which, 66 proteins were proposed to form the core surfaceome. At 18 h, the appearance of several r-proteins and glycolytic adhesive moonlighters, possibly via an autolysin (AtlA)-mediated release, was demonstrated in all materials, whereas classical surface adhesins, resistance- and virulence-associated proteins displayed greater variation in their abundances depending on the used material. Hydroxyapatite-associated biofilms were more susceptible to antibiotics than biofilms formed on titanium, but no clear correlation between the tolerance and biofilm age was observed. Thus, other factors, possibly the adhesive moonlighters, could have contributed to the observed chemotolerant phenotype. In addition, a protein-dependent matrix network was observed to be already well-established at the 18 h time point. To the best of our knowledge, this is among the first studies shedding light into matrix-associated surfaceomes of S. aureus biofilms grown on different clinically relevant materials and at different time points
    corecore