Soft Glass Equiangular Spiral Photonic Crystal Fiber for Supercontinuum Generation

An equiangular spiral photonic crystal fiber (ES-PCF) design in soft glass is presented that has high nonlinearity ( gamma > 5250 W-1 middot km-1 at 1064 nm and gamma > 2150 W-1 middot km-1 at 1550 nm) with a low and flat dispersion (D ~ 0.8 ps/kmmiddotnm and dispersion slope ~ -0.7 ps/km middot nm2 at 1060 nm). The design inspired by nature is characterized by a full-vectorial finite element method. The ES-PCF presented improves over the mode confinement of triangular core designs and dispersion control of conventional hexagonal PCF, combining the advantages of both designs; it can be an excellent candidate for generating supercontinuum pumped at 1.06 mum

Ultra low bending loss equiangular spiral photonic crystal fibers in the terahertz regime

An Equiangular Spiral Photonic Crystal Fiber (ES-PCF) design in Topas® for use in the Terahertz regime is presented. The design shows ultra low bending loss and very low confinement loss compared to conventional Hexagonal PCF (H-PCF). The ES-PCF has excellent modal confinement properties, together with several parameters to allow the optimization of the performance over a range of important characteristics. A full vector Finite Element simulation has been used to characterize the design which can be fabricated by a range of techniques including extrusion and drilling

Metal-Coated Defect-Core Photonic Crystal Fiber for THz Propagation

Modal solutions for metal-coated defect-core photonic crystal fiber (PCF) with a central air-hole have been obtained by using a full-vectorial finite element method to model the guidance of THz waves. It has been shown that the surface plasmon modes can couple with the defect-core PCF mode to form supermodes, with potential for sensing applications

Stabilized large mode area in tapered photonic crystal fiber for stable coupling

A rigorous modal solution approach based on the numerically efficient finite element method (FEM) has been used to design a tapered photonic crystal fiber with a large mode area that could be efficiently coupled to an optical fiber. Here, for the first time, we report that the expanded mode area can be stabilized against possible fabrication tolerances by introducing a secondary surrounding waveguide with larger air holes in the outer ring. A full-vectorial -field approach is employed to obtain mode field areas along the tapered section, and the Least Squares Boundary Residual (LSBR) method is used to obtain the coupling coefficients to a butt-coupled fiber

Numerical analysis of second harmonic generation in soft glass equiangular spiral photonic crystal fibers

In this paper, the accurate and numerically efficient finite element (FE)-based beam propagation method (BPM) has been employed to investigate second harmonic generation (SHG) in highly nonlinear soft glass (SF57) equiangular spiral photonic crystal fibers (ES-PCFs) for the first time. It is shown here that the SHG output power in highly nonlinear SF57 soft glass PCF exploiting the ES design is significantly higher compared with that of silica PCF with hexagonal air-hole arrangements. The effects of fabrication tolerances on the coherence length and the modal properties of ES-PCF are also illustrated. Moreover, phase matching between the fundamental and the second harmonic modes is discussed through the use of the quasi-phase matching technique. Furthermore, the ultralow bending loss in the SF57 ES-PCF design has been successfully analyzed

Characterization of silicon nanowire by use of full-vectorial finite element method.

We have carried out a rigorous H-field-based full-vectorial modal analysis and used it to characterize, more accurately, the abrupt dielectric discontinuity of a high index contrast optical waveguide. The full-vectorial H and E fields and the Poynting vector profiles are described in detail. It has been shown through this work that the mode profile of a circular silicon nanowire is not circular and also contains a strong axial field component. The single-mode operation, vector field profiles, modal hybridness, modal ellipticity, and group velocity dispersion of this silicon nanowire are also presented

Determination of the Aspect-ratio Distribution of Gold Nanorods in a Colloidal Solution using UV-visible absorption spectroscopy

Knowledge of the distribution of the aspect ratios (ARs) in a chemically-synthesized colloidal solution of Gold Nano Rods (GNRs) is an important measure in determining the quality of synthesis, and consequently the performance of the GNRs generated for various applications. In this work, an algorithm has been developed based on the Bellman Principle of Optimality to readily determine the AR distribution of synthesized GNRs in colloidal solutions. This is achieved by theoretically fitting the longitudinal plasmon resonance of GNRs obtained by UV-visible spectroscopy. The AR distribution obtained from the use of the algorithm developed have shown good agreement with those theoretically generated one as well as with the previously reported results. After bench-marking, the algorithm has been applied to determine the mean and standard deviation of the AR distribution of two GNRs solutions synthesized and examined in this work. The comparison with experimentally derived results from the use of expensive Transmission Electron Microscopic images and Dynamic Light Scattering technique shows that the algorithm developed offers a fast and thus potentially cost-effective solution to determine the quality of the synthesized GNRs specifically needed for many potential applications for the advanced sensor systems

Infinite barbarians

This paper discusses an infinite regress that looms behind a certain kind of historical explanation. The movement of one barbarian group is often explained by the movement of others, but those movements in turn call for an explanation. While their explanation can again be the movement of yet another group of barbarians, if this sort of explanation does not stop somewhere we are left with an infinite regress of barbarians. While that regress would be vicious, it cannot be accommodated by several general views about what viciousness in infinite regresses amounts to. This example is additional evidence that we should prefer a pluralist approach to infinite regresses

A History of Trauma is Associated with Aggression, Depression, Non-Suicidal Self-Injury Behavior, and Suicide Ideation in First-Episode Psychosis.

The association between trauma and psychosis outcomes is well-established, and yet the impact of trauma on comorbid clinical symptoms-such as aggression, non-suicidal self-injury behavior (NSSIB), suicide ideation, and suicide behavior-for those with psychosis is unclear. To effectively treat those with first-episode psychosis (FEP) and a history of trauma, we need to understand the impact of trauma on their whole presentation. FEP participants were recruited from an Early Psychosis Program (N = 187, ages 12-35, 72.2% male). Clinicians gathered history of trauma, aggression, and suicide data, and rated current symptom severity and functioning. Data was coded using clinician rated measures, self-report measures, and retrospective clinical chart review. Regression analyses examined whether trauma was associated with a history of aggression, suicidal ideation, suicide behavior, NSSIB, symptoms, and functioning. Trauma was associated with aggression, aggression severity and type of aggression (aggression towards others). Trauma was also associated with depression severity, suicide ideation, most severe suicide ideation, and NSSIB. Trauma was not associated with suicide behavior, severity of suicide behavior or psychosocial functioning. Integrating trauma treatment into FEP care could reduce rates of depression, aggression, suicide ideation, and NSSIB for those with a history of trauma. To reduce suicide attempt occurrence and improve functioning, more research is needed