Taylor dispersion of gyrotactic swimming micro-organisms in a linear flow

The theory of generalized Taylor dispersion for suspensions of Brownian particles is developed to study the dispersion of gyrotactic swimming micro-organisms in a linear shear flow. Such creatures are bottom-heavy and experience a gravitational torque which acts to right them when they are tipped away from the vertical. They also suffer a net viscous torque in the presence of a local vorticity field. The orientation of the cells is intrinsically random but the balance of the two torques results in a bias toward a preferred swimming direction. The micro-organisms are sufficiently large that Brownian motion is negligible but their random swimming across streamlines results in a mean velocity together with diffusion. As an example, we consider the case of vertical shear flow and calculate the diffusion coefficients for a suspension of the alga <i>Chlamydomonas nivalis</i>. This rational derivation is compared with earlier approximations for the diffusivity

Tip enhanced laser ablation sample transfer for mass spectrometry

© 2015 Materials Research Society. Mass spectrometry is one of the primary analysis techniques for biological analysis but there are technological barriers in sampling scale that must be overcome for it to be used to its full potential on the size scale of single cells. Current mass spectrometry imaging methods are limited in spatial resolution when analyzing large biomolecules. The goal of this project is to use atomic force microscope (AFM) tip enhanced laser ablation to remove material from cells and tissue and capture it for subsequent mass spectrometry analysis. The laser ablation sample transfer system uses an AFM stage to hold the metal-coated tip at a distance of approximately 10 nm from a sample surface. The metal tip acts as an antenna for the electromagnetic radiation and enables the ablation of the sample with a spot size much smaller than a laser focused with a conventional lens system. A pulsed nanosecond UV or visible wavelength laser is focused onto the gold-coated silicon tip at an angle nearly parallel with the surface, which results in the removal of material from a spot between 500 nm and 1 um in diameter and 200 and 500 nm deep. This corresponds to a few picograms of ablated material, which can be captured on a metal surface for MALDI analysis. We have used this approach to transfer small peptides and proteins from a thin film for analysis by mass spectrometry as a first step toward high spatial resolution imaging

Vacancy formation energy of simple metals using reliable model and ab initio pseudopotentials

We present a self-consistent calculation of the mono vacancy formation energy for seven simple metals Li, Na, K, Rb, Cs (all bcc), Al (fcc) and Mg (hcp) using both model and ab initio pseudopotential used in earlier unified studies. The local model pseudopotential calculations show small variations with respect to different exchange-correlation functions and the results are in fair agreement with other similar calculations and the available experimental data. The comparisons show that reliable model (pseudo) potential for simple metals can indeed be obtained for explaining a host of properties. Also, considering the importance of third order term in ab initio calculations, the results of our second order calculation appear fairly reasonable and are comparable with other first principle calculations. The perturbation series being an oscillating one, we hope to improve the calculational results using suitable series convergence acceleration method in the next part of our study

Influence of surface engineering on 3D printed Ti lattice structure towards enhanced tissue integration: An in vitro and in vivo study

Reconstruction of segmental defects are popularly approached with surface engineered additively manufactured scaffolds owing to its enhanced post-surgery tissue integration properties. The present work is aimed at fabrication of Ti lattice structures using 3D printing, with a novel approach of silane chemistry-based surface modification of those Ti-surfaces with osteogenic peptides (OGP). The lattice structures with 0.6 mm strut-diameter having 0.5 mm inter-strut distance were chosen for fabrication using an extrusion-based 3D printing. Based on the evidence, it could be concluded that extrusion-based 3D printing is an optimal alternative as compared to those high cost incurring additive manufacturing processes. Therefore, OGP were grafted on the pristine Ti-surfaces using a silane chemistry based novel vapour deposition process. In vitro assessments of the surface modified scaffolds using human amniotic derived mesenchymal stem cells showed evidence of enhanced cell adhesion and viability. In vivo subcutaneous study in rat models of the surface modified Ti-scaffolds also showed enhanced tissue integration in terms of Collagen I deposition around the boundary of the tissue-integrated struts as compared to those of pristine scaffolds. The study has established that the novel surface modification technique is capable to engineer the Ti-surfaces towards enhanced tissue integration in vivo

Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials

Lump lime is conventionally used as a flux material in steel making. However, use of burnt lump lime often creates problem in operation due to its high melting point, poor dissolution property, fine generation tendency and hygroscopic nature. Lime in combination with iron oxide may form a low melting oxidizing slag and makes the refining process faster. In this context, NML has developed a novel process of making fluxed pellet utilizing waste materials from steel plant without using any binder and without firing. The developed pellet shows very good cold crushing strength (30Kg/pellet), drop impact strength (150) and tumbler index (98%). The high temperature properties of the pellets like thermal shock resistance, melting point (1180oC) and dissolution time (30-60 sec) in molten bath are also found to be excellent. Performance of pellets has been assessed in a simulated oxygen bottom blown process in laboratory scale. Very fast decarburization and dephosphorization, improved metallic yield and decrease in oxygen consumption with controlled foaming are observed. Overall, in the present study the lime-fluxed iron ore pellets, developed in a binder-less room temperature process utilizing waste materials of steel plant are found to possess good cold handling and thermal properties, and favorable melting and refining characteristics, to warrant their application as a partial/complete substitute of the traditional scrap-lime combination in basic oxygen steel making or faster refining in steel making process

Novel magnetite nanoparticles coated with waste sourced bio- based substances as sustainable and renewable adsorbing materials

This study examines the possibility of using bio-based product isolated from urban solid wastes as a material for environmental technological applications. To this end, Fe3O4 nanoparticles coated with different amounts of soluble bio-based products (SBO) were synthesized as low-cost nanoadsorbent for the removal of pollutants in wastewater. Particles of 10 nm diameter with Fe3O4 core and SBO shell were obtained. The concentration of SBO employed in the synthesis had no effect on the size and structure of the NPs, but ruled the pHPZC and aggregation of the nanoparticles in water. The cationic dye crystal violet (CV) was used as a model pollutant to test the adsorption capacity of the nanoparticles. The results indicated that both the medium pH and NP dosage were significant parameters to enhance the removal of CV. The results contribute to the studies which show how wastes can become a source of revenue through the industrial exploitation of their chemical value.Fil: Magnacca, Giuliana. Università di Torino; ItaliaFil: Allera, Alex. Università di Torino; ItaliaFil: Montoneri, Enzo. Università di Torino; ItaliaFil: Celi, Luisella. Università di Torino; ItaliaFil: Benito, Damián Ezequiel. Universidad Nacional de La Plata. Laboratorio de Investigación y Desarrollo de Métodos Analíticos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Gagliardi, Leonardo Gabriel. Universidad Nacional de La Plata. Laboratorio de Investigación y Desarrollo de Métodos Analíticos; ArgentinaFil: Martire, Daniel Osvaldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Gonzalez, Monica Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Carlos, Luciano. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentin