Performance, combustion and emissions of a diesel engine operated with reformed EGR. Comparison of diesel and GTL fuelling

This is the post-print version of the final paper published in Fuel. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2008 Elsevier B.V.In this work, the effects of a standard ultra-low sulphur diesel (ULSD) fuel and a new, ultra-clean synthetic GTL (gas-to-liquid) fuel on the performance, combustion and emissions of a single-cylinder, direct injection, diesel engine were studied under different operating conditions with addition of simulated reformer product gas, referred to as reformed EGR (REGR). For this purpose various levels of REGR of two different compositions were tested. Tests with standard EGR were also carried out for comparison. Experiments were performed at four steady state operating conditions and the brake thermal efficiency, combustion process and engine emission data are presented and discussed. In general, GTL fuel resulted in a higher brake thermal efficiency compared to ULSD but the differences depended on the engine condition and EGR/REGR level and composition. The combustion pattern was significantly modified when the REGR level was increased. Although the extent of the effects of REGR on emissions depended on the engine load, it can be generally concluded that an optimal combination of GTL and REGR significantly improved both NOx and smoke emissions. In some cases, NOx and smoke emission reductions of 75% and 60%, respectively, were achieved compared to operation with ULSD without REGR. This offers a great potential for engine manufacturers to meet the requirements of future emission regulations.Shell Global Solutions UK, the Government of Castilla-La Mancha (Spain) and the Royal Thai Government

IA-CCF: Individual accountability for permissioned ledgers

Permissioned ledger systems allow a consortium of members that do not trust one another to execute transactions safely on a set of replicas. Such systems typically use Byzantine fault tolerance (BFT) protocols to distribute trust, which only ensures safety when fewer than 1/3 of the replicas misbehave. Providing guarantees beyond this threshold is a challenge: current systems assume that the ledger is corrupt and fail to identify misbehaving replicas or hold the members that operate them accountable—instead all members share the blame. We describe IA-CCF, a new permissioned ledger system that provides individual accountability. It can assign blame to the individual members that operate misbehaving replicas regardless of the number of misbehaving replicas or members. IA-CCF achieves this by signing and logging BFT protocol messages in the ledger, and by using Merkle trees to provide clients with succinct, universally-verifiable receipts as evidence of successful transaction execution. Anyone can audit the ledger against a set of receipts to discover inconsistencies and identify replicas that signed contradictory statements. IACCF also supports changes to consortium membership and replicas by tracking signing keys using a sub-ledger of governance transactions. IA-CCF provides strong disincentives to misbehavior with low overhead: it executes 47,000 tx/s while providing clients with receipts in two network round trips

Properties of an alkali-thermo stable xylanase from Geobacillus thermodenitrificans A333 and applicability in xylooligosaccharides generation

An extracellular thermo-alkali-stable and cellulase-free xylanase from Geobacillus thermodenitrificans A333 was purified to homogeneity by ion exchange and size exclusion chromatography. Its molecular mass was 44 kDa as estimated in native and denaturing conditions by gel filtration and SDS-PAGE analysis, respectively. The xylanase (GtXyn) exhibited maximum activity at 70 °C and pH 7.5. It was stable over broad ranges of temperature and pH retaining 88 % of activity at 60 °C and up to 97 % in the pH range 7.5–10.0 after 24 h. Moreover, the enzyme was active up to 3.0 M sodium chloride concentration, exhibiting at that value 70 % residual activity after 1 h. The presence of other metal ions did not affect the activity with the sole exceptions of K+ that showed a stimulating effect, and Fe2+, Co2+ and Hg2+, which inhibited the enzyme. The xylanase was activated by non-ionic surfactants and was stable in organic solvents remaining fully active over 24 h of incubation in 40 % ethanol at 25 °C. Furthermore, the enzyme was resistant to most of the neutral and alkaline proteases tested. The enzyme was active only on xylan, showing no marked preference towards xylans from different origins. The hydrolysis of beechwood xylan and agriculture-based biomass materials yielded xylooligosaccharides with a polymerization degree ranging from 2 to 6 units and xylobiose and xylotriose as main products. These properties indicate G. thermodenitrificans A333 xylanase as a promising candidate for several biotechnological applications, such as xylooligosaccharides preparation

Characterization of Annona cherimola mill. Seed oil from Madeira Island: a possible biodiesel feedstock

The possibility of using Annona seed oil as an added value product, namely as a source of biodiesel, is explored. Milled Annona seeds were extracted with hexane at room temperature (72 h) and at solvent boiling point (6 h). Oil content was found to be 25 and 22.4% respec tively. The oil was characterized in terms of lipid compo sition (HPLC–APCI–MS and 13C NMR), resistance to oxidation and acidity index. FAME composition was determined by GC–MS and five major peaks were identi fied. Production of biodiesel from Annona’s seed oil was achieved by base-catalyzed transesterification. Density, viscosity, refraction coefficient, acid value, cold filter plugging point, cloud point and oxidation stability were measured. The iodine value and the ‘‘apparent cetane number’’ were calculated. Density, viscosity, acid value, iodine value, cold filter plugging point and cloud point were within EN14214 specifications and the calculated ‘‘apparent cetane number’’ was also indicative of a suitable product.info:eu-repo/semantics/publishedVersio

Oral Health in Women During Preconception and Pregnancy: Implications for Birth Outcomes and Infant Oral Health

The mouth is an obvious portal of entry to the body, and oral health reflects and influences general health and well being. Maternal oral health has significant implications for birth outcomes and infant oral health. Maternal periodontal disease, that is, a chronic infection of the gingiva and supporting tooth structures, has been associated with preterm birth, development of preeclampsia, and delivery of a small-for-gestational age infant. Maternal oral flora is transmitted to the newborn infant, and increased cariogenic flora in the mother predisposes the infant to the development of caries. It is intriguing to consider preconception, pregnancy, or intrapartum treatment of oral health conditions as a mechanism to improve women's oral and general health, pregnancy outcomes, and their children's dental health. However, given the relationship between oral health and general health, oral health care should be a goal in its own right for all individuals. Regardless of the potential for improved oral health to improve pregnancy outcomes, public policies that support comprehensive dental services for vulnerable women of childbearing age should be expanded so that their own oral and general health is safeguarded and their children's risk of caries is reduced. Oral health promotion should include education of women and their health care providers ways to prevent oral disease from occurring, and referral for dental services when disease is present

Effect of air voids content on thermal properties of asphalt mixtures

Air voids content is considered as one of the factors that may affect heat transfer through asphalt mixture, although their specific role on the asphalt mixture temperature is still unclear. The objective of this research is to have a deep insight of the effect of air voids content on the temperature evolution, transport and storage of heat in asphalt mixture under dry conditions. With this objective, asphalt mixture slabs with different air voids content have been built and their thermal conductivity, specific heat capacity, light absorptivity and thermal diffusivity related to their temperature evolution have been measured when they are exposed to infrared light and during the cooling process. It was observed that asphalt mixture with high air voids content exhibited slightly higher steady state temperatures than denser asphalt mixture and that the heating and cooling rates are higher in porous asphalt mixture than in denser materials. The reason for the faster increase and decrease in temperature of porous mixture and for the higher temperature reached by porous asphalt is its lower specific heat capacity and thermal conductivity. Finally, it could be observed that the connectivity of air voids in asphalt mixture did not play an important role on the temperature reached by asphalt mixture