Effect of Pulp Protection Technique on the Clinical Performance of Amalgam Restorations: Three-Year Results

This study evaluated the influence of the pulp protection technique on clinical performance of amalgam restorations after three years, with particular reference to post-operative sensitivity and secondary caries. One hundred and twenty (120) Class II amalgam restorations (68 premolars, 52 molars; 78 MOD, 42 OD/MO) were placed in 30 participants (four restorations per participant).The restorations were divided into four groups according to the pulp protection technique used: copal varnish; 2% neutral sodium fluoride; adhesive resin and no pulp protection. The parameters evaluated were post-operative sensitivity, staining of the dental structure, tooth vitality, partial or total loss of the restoration and secondary caries. One hundred and eight (108)restorations were available for evaluation after three years. No partial or total loss of restorations had occurred; all teeth were vital, no tooth structure staining or secondary caries was detected in any of the restored teeth. Post-operative sensitivity was observed only in two restorations at baseline and at seven-days. The three year clinical performance of teeth restored with a high copper dispersed phase amalgam was not affected by the choice of pulp protection technique

Building Simulation Applications BSA 2013 - Proceedings of 1st IBPSA Italy conference

Building Simulation application 2013 was the first IBPSA Italy regional conference on building performance simulation. The two-day event focused on three main subjects: simulation of building performance, actual perspectives in building physics and simulation tools. The principal mission is to promote and advance the practice of building performance simulation in order to improve the design, construction, operation and maintenance of new and existing building

Building Simulation Applications BSA 2013 - Proceedings of 1st IBPSA Italy conference

Building Simulation application 2013 was the first IBPSA Italy regional conference on building performance simulation. The two-day event focused on three main subjects: simulation of building performance, actual perspectives in building physics and simulation tools. The principal mission is to promote and advance the practice of building performance simulation in order to improve the design, construction, operation and maintenance of new and existing buildings

Experimental Investigation and RSM Modeling of the Effects of Injection Timing on the Performance and NOx Emissions of a Micro-Cogeneration Unit Fueled with Biodiesel Blends

The (partial or total) substitution of petro-diesel with biodiesel in internal combustion engines (ICEs) could represent a crucial path towards the decarbonization of the energy sector. However, critical aspects are related to the controversial issue of the possible increase in Nitrogen Oxides (NOx) emissions. In such a framework, the proposed study aims at investigating the effects of biodiesel share and injection timing on the performance and NOx emissions of a diesel micro combined heat and power (CHP) system. An experimental campaign has been conducted considering the following operating conditions: (i) a reference standard injection timing (17.2° BTDC), an early injection timing (20.8° BTDC), and a late injection timing (12.2° BTDC); (ii) low (0.90 kW), partial (2.45 kW), and full (3.90 kW) output power load; and (iii) four fuel blends with different biodiesel (B) shares (B0, B15, B30, and B100). Experimental data were also elaborated on thanks to the response surface modelling (RSM) technique, aiming at (i) quantifying the influences of the above-listed variables and their trends on the responses, and (ii) obtaining a set of predictive numerical models that represent the basis for model-based design and optimization procedures. The results show: (i) an overall improvement of the engine performance due to the biodiesel presence in the fuel blend —in particular, B30 and B100 blends have shown peak values in both electrical (29%) and thermal efficiency (42%); (ii) the effective benefits of late SOI strategies on NOx emissions, quantified in an overall average NOx reduction of 27% for the early-to-late injection, and of 16% for the standard-to-late injection strategy. Moreover, it has emerged that the NOx-reduction capabilities of the late injection strategy decrease with higher biodiesel substitution rates; through the discussion of high-prediction-capable, parametric, data-driven models, an extensive RSM analysis has shown how the biodiesel share promotes an increase of NOx whenever it overcomes a calculated threshold that is proportional to the engine load (from about 66.5% to 85.7% of the biodiesel share)

Carbamide peroxide gel stability under different temperature conditions: is manipulated formulation an option?

Nowadays the use of gel containing carbamide peroxide (CP) prepared in Pharmacy is a normal practice in the population. However, the quality of this product is questionable concerning its stability. The aim of this study is was to synthesize and to analyze this drug alone or associated to Carbopol gel through analytical methodology compatible with the routine of the Pharmacies. The reaction between urea and hydrogen peroxide was carried out at different resting times: 24 hours (CP 24 powder) and 48 hours (CP48 powder) after the mixture. Both products were associated with Carbopol 940® gel 1.5% (G) generating G24 and G48 samples. The stability of powders (CP24 e CP48) and the formulations (G24 and G48) were evaluated as a function of time (15, 40 and 45 days) and thermal variation (refrigeration: 8 °C±1; thermal shock 32 °C±1 /8 °C±1; stove: 32 °C±1), using a standard titration method. As a result, only under refrigeration the CP24 and CP48 contents remained stable during the period of 45 days. An interesting finding was that G24 and G48 presented greater stability for at least 45-days under refrigeration and thermal shock conditions, and up to 30 days under stove conditions. The results for the G24 and G48 were slightly higher than those obtained for the control. Therefore, we were able to conclude that association with Carbopol 940® Gel 1.5 % provided greater CP stability and that manipulated formulations containing CP may be viable for use in a period of 45 days under refrigeration conditions. The titration proved to be an effective technique for the analysis of CP with or without Carbopol 940® gel 1.5%.Atualmente, a utilização de gel contendo peróxido de carbamida manipulado em Farmácia é uma prática comum na população. No entanto, a qualidade deste produto é questionada, sobretudo no que se refere à estabilidade deste fármaco. O objetivo deste trabalho consiste na avaliação da viabilidade de sintetizar e analisar quantitativamente este fármaco associado ou não a um gel de Carbopol através de metodologia analítica compatível com a rotina das Farmácias. A reação entre a uréia e o peróxido de hidrogênio foi realizada em tempos diferentes de repouso após a mistura, 24 h para sintetizar o pó PC 24 e 48 h para o pó CP 48. Estes pós foram associados a um gel (G) de Carbopol 940® 1,5 %, originando as amostras G24 e G48. A estabilidade dos pós (PC 24 e PC 48) e das formulações (G 24 e G 48) foi avaliada em função do tempo (15, 40 e 45 dias) e da variação térmica (refrigeração: 8 °C±1; choque térmico: 32 °C±1/8 °C±1 e estufa: 32 °C±1), através da técnica de titulometria. Os resultados indicam que unicamente sob refrigeração o CP24 e o CP 48 mantiveram-se estáveis no período de 45 dias. O G24 e o G48 apresentaram estáveis por pelo menos 45 dias nas condições de refrigeração e choque térmico e por 30 dias na condição estufa. Os resultados obtidos para o G24 e G48 foram ligeiramente superiores aos obtidos para o controle. Além disso, é possível concluir que a associação do PC com o gel de Carbopol 940® 1,5 % promoveu um aumento na estabilidade do PC e que as preparações manipuladas contendo PC são viáveis para uso durante um período de 45 sob refrigeração. A titulometria mostrou-se uma técnica eficaz para a análise do PC associado ou não ao gel de Carbopol 940® 1,5%

Dynamic simulation of buildings: comparison between different approaches

In this work the authors compare the internal room air temperature and cooling load simulated with different methods. The simulations have been applied to a building of the University of Trento. The trend of temperature obtained with me calculation procedure has been compared with the actual internal air temperature measured in summer 2008. The results of these comparisons highlight the differences between the various methods and make clear that care must be exercised when applying these methods lo assess cooling loads in the European contexts